Set visual interaction within charts in Qlik Sense - visualization

I have two drill down bar chart in a container, within one drill down chart I need to select a bar and a pivot table below it needs to be get filtered according to that selection and all other chart should remain unfiltered just like the way we set interaction in power bi. I found a way but it is not working I have written the steps below -
Master items - Alternate states - Create new
Create an alternate states and then drag and drop to the charts which needs to be updated, I have also applied a formula in the measure, but non of them are working, like -
= Sum({[alternate_name]}Amount)
Please guide me over this.

This is a tough one because Master Items can't use alternate states (or at least Master visualizations can't) outside of referencing them in set analysis, as you tried (See the Limitations section of this Qlik Help page). In your example =Sum({[alternate_name]} Amount), you probably found that the selecting the bars was still affecting everything else but selecting in the pivot table was filtering the bar chart.
What you'll need to do here is to create that second bar chart within the container itself, rather than creating a Master visualization. When you're adding a chart to a container, you have the option of either using a Master Visualization or just creating a chart within the container itself (see this screenshot here). When you create a chart within a container, you have the ability to apply an Alternate State.
Here's a GIF of me using this setup.

Related

how to see more than 5 labels in pie chart in tableau

I see only 5 labels even that i have 6 options - how can i solve it? the Malicious Bots are not shown in the labels.
You can't see them because there no space available and so Tableau suggest you to not show it.
If you want to see it anyway, you can go to the Label mark of your worksheet, and check the flag "allow label to overlap".
Remember that selecting a specifc slice you can move the label, but I would not reccomend it if your chart may change due to filters.

Data visualization using Drupal-8 Views, Flipped Table and Charts API?

I have created a simple form to collect 15 inputs. I installed Flipped Table to flip the table from row to column format and created a new view to display the flipped table using rendered entity.
Then I added a chart attachment to the Master Flipped Table page. The main label is Submission ID and the data fields are the 15 categories. The pie chart is not showing at all. I seem to be stuck in bridging the data from the fields to the pie chart. Any direction will be most helpful.
If you're using the Charts module, in this case I would recommend adding a regular attachment, and then setting the display settings to Chart (Chart attachment is really intended as a second series on an existing chart). Also, please be sure to inspect element and look at the console for any JS errors...it's possible your charting library was not installed properly, and that would give you a good indication.

Grafana custom time range for one panel only

I want to slide the panel graph for 5minute into the future, I know I can do this
using 'Custom Range' at the top right of the screen and setting to 'to' field to 'now+5m' .
However this will be applied to all my panels.
Now..I want this for only a specific panel.
What I have found is time range tab but it only allows to truncate the time but cant push forward it.
Is there a way to use this only for one panel?
I have found a solution using addition: 0m+5m
Seems grafana doesnt substracts the value of the amount field from the current time as a whole
like timeshift-(Xm+Ym)
but performs the operations after each other
like timeshift-Xm+Ym
Could be a bug tbh.

Unable to change order of Stacked bar chart data

I'm using Crystal 11.5 on the desktop. I'm having a problem where the stacked chart data is not appearing as I want. It appears like below, but I would like:
1) Completed on bottom, then Open on top,
2) Completed should be blue color, Open orange.
I think once the data appears as I want, changing the color should be easy enough via manual manipulation.
I tried using a lot of different chart options and playing around with Specified Order as reversed (Open, Completed instead of Completed, Open). Nothing I've done has worked.
In order to have the stacked data appear as I want, I needed to first create a cross tab (pivot table). Then right click on the cross tab and select Insert Chart.

How do I get a chart to redraw itself when the model is paused?

I have a Time Stack Chart whose data set can be changed by clicking on a radio button. While the model is running, the chart instantaneously updates its appearance when a radio button is clicked. When the model is paused, however, the chart's area becomes blank when a radio button is clicked; the legend, in contrast, updates automatically. How do I manually force the chart area to redraw itself?
When you pause a model, only a part of Anylogic is actually paused. The thread that handles the GUI keeps running, which is why you can navigate around in the model while it is paused.
This also means that if you try to update a chart's data while the simulation is paused, the appearance will refresh but -- as your data is being updated in another thread that is currently paused -- it will not have received that data.
If you want to pause the simulation and still be able to switch the data being displayed in a chart, you could take a look at the Airport example model. It provides a good method to switch between different charts by making them visible/invisible and adjusting the width, height, x and y. Essentially, you make all of the charts you need, overlap them perfectly, and then make visible the one that is currently of interest to you.
If you want to create the charts programmatically, on top of creating the chart with, e.g., new TimeStackChart(...), you also have to add it to the top level presentation group with main.presenation.add(...). If you don't do this, the chart will never appear in the model as the model won't have anything to display! To find more information on how to create a chart programmatically, make a chart in Main and then open Main in the Java editor. Find the chart you created, take a look at it's constructor (there are a lot of arguments!), and use it as rough template for the charts you wish to create. The Help documentation will further make sense of the parameters you see.
have you tried the chart.refresh(); method?
Also try to update the embedding agent using agent.onChange().
hope that helps
I encountered the exact same problem, and came up with workaround.
Try this, which I know works in AnyLogic v7:
if (getEngine.getState() == getEngine().PAUSED ){
dynChart.setSelectedItemIndices( new int[]{0} );
dynChart.setSelectedItemIndices( null );
}
I was able to get the chart to refresh manually when paused or finished by selecting/deselecting one of the legend items. I spent a few hours try out API variations to no avail, so I just emulated what was actually working in the UI and it worked.
I am dynamically generating a text item as the chart title, but I have not had the same luck getting the text to refresh when paused like the chart. Any ideas on that one?