I want to have RDP of Linux machine and when i print on Linux i should get print on local system.
I do not want to share the printer on the network. how can I do this if you have any suggestion it will be helpful for me
I tried XRDP, RDESKTOP, FREERDP, VNCSERVER, FLEXIHUB and USB over network
Related
Is there a way to connect to a host through matlab using SSH? The way that can be done in vscode for example.
I have script and data in the remote machine but matlab license in my local machine. I would like to run the matlab scripts using matlab installed on my laptop.
Alternatively, I clone the scripts on my laptop run them while processing the data located in the remote machine.
https://en.wikipedia.org/wiki/SSHFS
helps you mount a remote filesystem via ssh. So if you can login from your matlab laptop to the data pc via ssh , then sshfs is one step more. From there your data is a path on the matlab laptop.
Hello Friends,
I have a raspberry pi powered with Raspbian OS. I want to create a device which will perform some action like "open calculator ,open notepad,etc" on windows pc by commanding from a raspberry pi. So my problem is how to establish communication between raspberry pi and another windows pc ?
If i use VNC and SSH service, can i invoke other programs remotely on pc ?
You could use netcat, also known as nc which is included in most Linux distros and is available for Windows.
All you would do on the Windows box is get your IP address with:
ipconfig
Then you would start listening on some random port, say 5000 because that has no security restrictions and pass whatever arrives on that port to CMD.EXE for execution:
nc -l -p 5000 -e CMD.EXE
Then, on your Raspberry Pi, you would just do:
nc <WINDOWS_IP_ADDRESS> 5000
Now you can type Windows commands in your Rasperry Pi terminal for execution on the Windows box:
DIR
NOTEPAD
There is a "cheatsheet" here and I am using the technique in the section entitled "Backdoor Shells".
Note that this is a big security hole, but if it is just for yourself playing around on a private network, it is nice and simple.
There are Raspberry Pi 3 model B and MicroSD with NOOBS OS. Unfortunately I have not any display to get a direct access to NOOBS shell. So remote connection could be set via ssh. However my device does not have any IP-address. I read everywhere that the connection options must be set... via shell. But it's impossible for me!
How can I resolve this problem and get remote access to shell (or to desktop even)?
I ran into this a while ago, I started using PiBakery. It will write raspbian to the SD card and add a startup script to connect to the network and enable ssh. This way the first time you boot it up, its ready to go and you can connect via SSH.
When you set it up, it also allows you to set a static IP address so you know exactly where it is when it boots.
Enable SSH by placing a file named 'ssh', without any extension, onto the boot partition of the SD card.
Connect your device to your LAN using a wired connection.
From another computer on the network execute arp -a to view locally connected hosts and get your raspberry pi's IP address.
From there you should be able to SSH into your pi.
I am new to virtual machines so pardon my ignorance.
I have a host machine running Windows Server 2012 R2 and I'm trying to run a VM with Windows 8.1 Enterprise using Hyper-V. I need to be able to use USB devices on the VM.
Please check screenshot for the Hyper-V settings and the VM settings. The VMConnect does not have 'Show Options' to select local resources.
I tried using Remote Desktop Connection to the VM but nothing happens when USB devices are plugged in the host machine.
Not sure what I'm missing here.
Any help in fixing this will be greatly appreciated. Thanks!
Hyper-V Settings
VM Settings
If the USB device you want to use in the VM is a USB memory stick share it with the RDP local resources option as a Drive instead of the trying to replicate the USB port itself.
Eg:
There is a dependency(XRDP) to be installed in order to enable Enhanced Session Mode. Please follow the following steps or watch this video for more clarity.
Visit https://www.youtube.com/watch?v=LS2m6iyG7_M&ab_channel=VikeshYadav
On hyper-v linux machine:
git clone https://github.com/Microsoft/linux-vm-tools
cd linux-vm-tools/ubuntu/18.04/
sudo chmod +x install.sh
sudo ./install.sh
On windows machine:
set-vm -VMName ubuntu -EnhancedSessionTransportType HvSocket
I've got Win8.1 guest system (1 gen VM) and Win10 as host. Tried pretty much everything, but wasn't able to enable Enhanced Mode (simply grayed out all the time), unless I enabled RDP connections in the guest system (Control Panel, Allow remote access to your computer). After this change VMConnect with ability to share local resources appeared on attempt to connect to the VM.
Hope this helps all the people who find this thread while googling.
I used to debug the Windows Kernel using VirtualKD, WinDBG and a single Virtual Machine.
Recently I got a Linux machine, and now I wonder- What's the easiest way to debug the Windows Kernel when your host is unable to run VirtualKD/WinDBG*?
I assume the solution will require two Virtual Machines, but I rather have two instances hosted on my actual machine rather than having an instance residing inside another virtual instance...
Is there anyway to make that work?
Thanks in advance!
*Wine is the last resort for stability reasons...
Solved! Basically, I ended up using two (VirtualBox) VMs emulating a Serial connection (null-modem cable) over a Unix domain socket (on the host). For more info, read below:
Hardware setup*:
Debuggee:
Ensure the machine is turned off and edit Serial Ports settings.
Enable Port 1, and assign values as follows: Port Number: COM1, Port Mode: Host Pipe, Create Pipe: Unchecked (client), Port/File Path: /tmp/win_link.
Debugger:
Same as above (using the same path), only this time Create Pipe should be Checked (server).
Debugger setup:
Run WinDBG and press Ctrl+K to invoke Kernel Debugging.
in COM, enter: Baudrate: 115200, Port: COM1, Resets: 0 and verify that Pipe and Reconnect are unchecked (important).
You'll be presented with the following output: Opened \\\\.\com1 Waiting to reconnect...
Debuggee setup:
Run bootcfg /debug on /port com1 /baud 115200 /id 1. To verify, run bootcfg.**
Reboot.
Quite early during the booting stage, WinDBG on the other machine should detect the debuggee is running.
*Assuming VirtualBox is used. VMWare/KVM users will probably be able to achieve the same results following similar steps. Also, for more info refer to the VirtualBox docs.
**Assuming guests are Windows XP. Later versions include bcdedit, which may be used as described here.
For QEMU\KVM follow those instructions:
http://www.linux-kvm.org/page/WindowsGuestDrivers/GuestDebugging
Very helpful but applies to Windows XP machines. You can refer to the following link if you need to configure 2 Windows7-based virtual machines on a Linux host: http://www.aldeid.com/wiki/Category:Digital-Forensics/Computer-Forensics/Debugger/Kernel
Another option nowadays is to enable local kernel debugging. This comes with some limitations, however it will enable you to access kernel data while just using one VM.
This approach only works on Windows 8.0 and Windows Server 2012 and later.
Follow these steps:
Open a Command Prompt window as Administrator.
Enter bcdedit /debug on
If the computer is not already configured as the target of a debug transport, enter bcdedit /dbgsettings local
Reboot the computer.
Once the system is rebooted, you can execute WinDBG as Administrator, press ctrl+k or go to File -> Attach to kernel -> Local and press OK.
At that point, you will be able to execute kernel-only commands and access kernel structures:
Tested under Windows 10 and with the new WinDBG version (preview).
Reference: Setting Up Local Kernel Debugging of a Single Computer Manually