I useUnikey program to write Vietnamese, when i try to use autohotkey program to remap key, when writing letters, the tone mark is not displayed correctly, can anyone help.Ex:
1::Send, p
2::Send, o
3::Send, i
4::Send, u
5::Send, y
RESULT: caí, gaí, thaỏ...(wrong)-->cái, gái, thảo...(right)
I use code in this link, it's very well written, but I have to type the space key too much, so I was going to remap some keys to make it easier to type but got this error.
mirror_1 = 6
mirror_2 = 7
mirror_3 = 8
mirror_4 = 9
mirror_5 = 0
mirror_q = 1
mirror_w = 2
mirror_e = 3
mirror_r = 4
mirror_t = 5
mirror_a = `;
mirror_s = l
mirror_d = k
mirror_f = j
mirror_g = h
mirror_z = /
mirror_x = .
mirror_c = ,
mirror_v = m
mirror_b = n
mirror_6 = 5
mirror_7 = 4
mirror_8 = 3
mirror_9 = 2
mirror_0 = 1
mirror_y = 5
mirror_u = 4
mirror_i = 3
mirror_o = 2
mirror_p = 1
mirror_h = g
mirror_j = f
mirror_k = d
mirror_l = s
mirror_n = b
mirror_m = v
return
; This key may help, as the space-on-up may get annoying, especially if you type fast.
Control & Space::Suspend
; These keys are optional, but they may help if you are typing on the left-hand side.
CapsLock::Send, {BackSpace}
Space & CapsLock::Send, {Enter}
; If spacebar didn't modify anything, send a real space keystroke upon release.
space::
Send {space}
return
space & 1::
space & 2::
space & 3::
space & 4::
space & 5::
space & q::
space & w::
space & e::
space & r::
space & t::
space & a::
space & s::
space & d::
space & f::
space & g::
space & z::
space & x::
space & c::
space & v::
space & b::
space & `;::
space & ,::
space & .::
space & /::
space & 6::
space & 7::
space & 8::
space & 9::
space & 0::
space & y::
space & u::
space & i::
space & o::
space & p::
space & h::
space & j::
space & k::
space & l::
space & n::
space & m::
; Determine the mirror key, if there is one:
if A_ThisHotkey = space & `;
MirrorKey = a
else if A_ThisHotkey = space & ,
MirrorKey = c
else if A_ThisHotkey = space & .
MirrorKey = x
else if A_ThisHotkey = space & /
MirrorKey = z
else ; To avoid runtime errors due to invalid var names, do this part last.
{
StringRight, ThisKey, A_ThisHotkey, 1
StringTrimRight, MirrorKey, mirror_%ThisKey%, 0 ; Retrieve "array" element.
if MirrorKey = ; No mirror, script probably needs adjustment.
return
}
Modifiers =
GetKeyState, state1, LWin
GetKeyState, state2, RWin
state = %state1%%state2%
if state <> UU ; At least one Windows key is down.
Modifiers = %Modifiers%#
GetKeyState, state1, Control
if state1 = D
Modifiers = %Modifiers%^
GetKeyState, state1, Alt
if state1 = D
Modifiers = %Modifiers%!
GetKeyState, state1, Shift
if state1 = D
Modifiers = %Modifiers%+
Send %Modifiers%{%MirrorKey%}
return
1::p
2::o
3::i
4::u
5::y
return
Related
So I had a question about this AHK Script it's basically an encrypter and decrypter. If you run the program you will need to input a password first and then you get to the real program so if you input a string inside of there and "Encode" it is there any way you can Save the "Encoded" string into a .txt with just a button?
I tried some stuff I found on the Internet with Submit and so but i didn't really figure it out. So I am kinda stuck here!
SetBatchLines -1
StringCaseSense Off
AutoTrim Off
Hotkey, !x, Exit
InputBox, pass ,Encrypter 1.0, Please enter the Password , HIDE, 190, 140
ifEqual pass, pass, GoSub, key
IfNotEqual, pass, pass, MsgBox , 0, Wrong Password, The password was incorrect please try again or press "ESC" to Exit the Programm
IfNotEqual, pass, pass, Reload
Sleep, 100
;----------------Interface--------------
Gui, 1: Add, Edit, x10 y10 w280 r8 vEncDec
Gui, 1: Font, bold
Gui, 1: Add, Text,, Copy and paste your raw text here to encrypt it.
Gui, 1: Color, d80101
Gui, 1: Add, Button, x10 y150 w75 gENCRYPT, Encode
Gui, 1: Add, Button, x10 y178 w75 gDELETE, Delete
Gui, 1: Add, Button, x110 y150 w75 gDECRYPT, Decode
Gui, 1: Add, Button, x110 y178 w75 gOPEN, Save
Gui, 1: Add, Button, x215 y150 w75 gExit, Exit
Gui, 1: Add, Button, x215 y178 w75 gCREATE, Create
Gui, 1: Show, w300 h208, Encrypter v1.0
Return
;------------------MANAGMENT---------------
DELETE:
MsgBox, 262208, WARNING!, If you delete the .txt all your Saved Passwords will be deleted!
Sleep 500
MsgBox, 262196, WARNING!, Do you really want to delete the .txt?
IfMsgBox Yes
FileDelete, %Temp%\ttcrashes.txt
return
CREATE:
MsgBox, 262208, WARNING!, If you create a new .txt your old .txt file may get deleted!
Sleep 500
MsgBox, 262196, WARNING!, Do you really want to create a new .txt?
IfMsgBox Yes
FileAppend,ENCODED:, %Temp%\ttcrashes.txt
return
OPEN:
Run, %Temp%\ttcrashes.txt
return
;-------------------Key--------------------
key:
k1 := 0x5025124 ;in each of these 5 keys edit the last 10 0s to random numbers so that they are each different and look something like this: 0x1928374659
k2 := 0x0681035170
k3 := 0x9704313523
k4 := 0x0427880892
k5 := 0x8754345242
return
;----------------Exit HK--------------------
Exit:
ExitApp
return
;-----------------------------------------------
;#############################################################################################################
ENCRYPT:
encrypt = 1
decrypt = 0
GoSub, EncryptDecrypt
Return
DECRYPT:
decrypt = 1
encrypt = 0
GoSub, EncryptDecrypt
Return
;#############################################################################################################
EncryptDecrypt:
Gui, 1: Submit, NoHide
i = 9
p = 0
L =
Loop % StrLen(EncDec)
{
i++
If i > 8
{
u := p
v := k5
p++
TEA(u,v, k1,k2,k3,k4)
Stream9(u,v)
i = 0
}
StringMid c, EncDec, A_Index, 1
a := Asc(c)
If a between 32 and 126
{
If encrypt = 1
{
a += s%i%
IfGreater a, 126, SetEnv, a, % a-95
c := Chr(a)
}
If decrypt = 1
{
a -= s%i%
IfLess a, 32, SetEnv, a, % a+95
c := Chr(a)
}
}
L = %L%%c%
}
GuiControl,, EncDec, %L%
Return
;#############################################################################################################
TEA(ByRef y,ByRef z,k0,k1,k2,k3) ; (y,z) = 64-bit I/0 block
{ ; (k0,k1,k2,k3) = 128-bit key
IntFormat = %A_FormatInteger%
SetFormat Integer, D ; needed for decimal indices
s := 0
d := 0x9E3779B9
Loop 32
{
k := "k" . s & 3 ; indexing the key
y := 0xFFFFFFFF & (y + ((z << 4 ^ z >> 5) + z ^ s + %k%))
s := 0xFFFFFFFF & (s + d) ; simulate 32 bit operations
k := "k" . s >> 11 & 3
z := 0xFFFFFFFF & (z + ((y << 4 ^ y >> 5) + y ^ s + %k%))
}
SetFormat Integer, %IntFormat%
y += 0
z += 0 ; Convert to original ineger format
}
Stream9(x,y) ; Convert 2 32-bit words to 9 pad values
{ ; 0 <= s0, s1, ... s8 <= 94
Local z ; makes all s%i% global
s0 := Floor(x*0.000000022118911147) ; 95/2**32
Loop 8
{
z := (y << 25) + (x >> 7) & 0xFFFFFFFF
y := (x << 25) + (y >> 7) & 0xFFFFFFFF
x = %z%
s%A_Index% := Floor(x*0.000000022118911147)
}
}
Esc::
ExitApp
return```
Well my expected result would be that if you press the "Save" Button on the GUI you the "Encoded" string gets saved into the .txt
As stated above by Yane, the correct syntax is FileAppend [, Text, Filename, Encoding]
Using one of the below should create/modify the file as intended.
FileAppend,ENCODED: %VariableName%, %Temp%\ttcrashes.txt
or
FileAppend,%VariableName%, %Temp%\ttcrashes.txt
I learning how to use Microsoft Word wildcards and codes to help me in my position as a medical editor. A big part of my job is submitting manuscripts to medical journals for review, and each journal has very specific requirements.
Most of the journals we submit manuscripts to require that medical terms/phrases be abbreviated only if they are used three or more times. For example, the term “Overall Survival” can be abbreviated to OS if the term is referenced at least three times in the text. If the text only mentions “Overall Survival” once or twice, it is preferred that the term remain expanded, and it should not be abbreviated to OS.
We have been using the PerfectIt system, by Intelligent Editing. This Word widget scans for abbreviations that are only used once and will flag them for our review, but does not pick up if an abbreviation is only used twice in the selected text. We are hoping to find some solution (my thought would be some sort of wildcard search or macro) that will be able to detect if an abbreviation is used only one or two times.
I saw this similar post on stackoverflow, but it seemed to do with code. I will need this to be on a company computer that I do not have administrative access to, and furthermore, I know nothing about code. I appreciate any help, guidance, or directions for further research!
Thank you!
Edit: I could use a wildcard search to make all of the two+ capitalized letters highlighted by using <[A-Z]{2,}>, then formatting them as highlighted, if this would help with any macros.
For any given abbreviation, you could use a macro like:
Sub Demo()
Application.ScreenUpdating = False
Dim i As Long
With ActiveDocument.Range
With .Find
.ClearFormatting
.Replacement.ClearFormatting
.Text = InputBox("What is the Text to Find")
.Replacement.Text = ""
.Forward = True
.Wrap = wdFindStop
.Format = False
.MatchCase = True
.MatchWholeWord = True
.MatchWildcards = False
.MatchSoundsLike = False
.MatchAllWordForms = False
.Execute
End With
Do While .Find.Found
i = i + 1
.Collapse wdCollapseEnd
.Find.Execute
Loop
End With
Application.ScreenUpdating = True
MsgBox i & " instances found."
End Sub
For PC macro installation & usage instructions, see: http://www.gmayor.com/installing_macro.htm
For Mac macro installation & usage instructions, see: https://wordmvp.com/Mac/InstallMacro.html
Provided there's at least one occurrence of the abbreviation in parens you could use a macro like the following. The macro checks the contents of a document for upper-case/numeric parenthetic abbreviations it then looks backwards to try to determine what term they abbreviate. For example:
World Wide Web (WWW)
Naturally, given the range of acronyms in use, it’s not foolproof and, if a match isn’t made, the preceding sentence (in VBA terms) is captured so the user can edit the output. A table is then built at the end of the document, which is then searched for all references to the acronym (other than for the definition) and the counts and page numbers added to the table.
Note that the macro won't tell you how many times 'World Wide Web' appears in the document, though. After all, given your criteria, it's impossible to know what terms should have been reduced to an acronym but weren't.
Sub AcronymLister()
Application.ScreenUpdating = False
Dim StrTmp As String, StrAcronyms As String, i As Long, j As Long, k As Long, Rng As Range, Tbl As Table
StrAcronyms = "Acronym" & vbTab & "Term" & vbTab & "Page" & vbTab & "Cross-Reference Count" & vbTab & "Cross-Reference Pages" & vbCr
With ActiveDocument
With .Range
With .Find
.ClearFormatting
.Replacement.ClearFormatting
.MatchWildcards = True
.Wrap = wdFindStop
.Text = "\([A-Z0-9]{2,}\)"
.Replacement.Text = ""
.Execute
End With
Do While .Find.Found = True
StrTmp = Replace(Replace(.Text, "(", ""), ")", "")
If (InStr(1, StrAcronyms, .Text, vbBinaryCompare) = 0) And (Not IsNumeric(StrTmp)) Then
If .Words.First.Previous.Previous.Words(1).Characters.First = Right(StrTmp, 1) Then
For i = Len(StrTmp) To 1 Step -1
.MoveStartUntil Mid(StrTmp, i, 1), wdBackward
.Start = .Start - 1
If InStr(.Text, vbCr) > 0 Then
.MoveStartUntil vbCr, wdForward
.Start = .Start + 1
End If
If .Sentences.Count > 1 Then .Start = .Sentences.Last.Start
If .Characters.Last.Information(wdWithInTable) = False Then
If .Characters.First.Information(wdWithInTable) = True Then
.Start = .Cells(.Cells.Count).Range.End + 1
End If
ElseIf .Cells.Count > 1 Then
.Start = .Cells(.Cells.Count).Range.Start
End If
Next
End If
StrTmp = Replace(Replace(Replace(.Text, " (", "("), "(", "|"), ")", "")
StrAcronyms = StrAcronyms & Split(StrTmp, "|")(1) & vbTab & Split(StrTmp, "|")(0) & vbTab & .Information(wdActiveEndAdjustedPageNumber) & vbTab & vbTab & vbCr
End If
.Collapse wdCollapseEnd
.Find.Execute
Loop
StrAcronyms = Replace(Replace(Replace(StrAcronyms, " (", "("), "(", vbTab), ")", "")
Set Rng = .Characters.Last
With Rng
If .Characters.First.Previous <> vbCr Then .InsertAfter vbCr
.InsertAfter Chr(12)
.Collapse wdCollapseEnd
.Style = "Normal"
.Text = StrAcronyms
Set Tbl = .ConvertToTable(Separator:=vbTab, NumRows:=.Paragraphs.Count, NumColumns:=5)
With Tbl
.Columns.AutoFit
.Rows(1).HeadingFormat = True
.Rows(1).Range.Style = "Strong"
.Rows.Alignment = wdAlignRowCenter
End With
.Collapse wdCollapseStart
End With
End With
Rng.Start = ActiveDocument.Range.Start
For i = 2 To Tbl.Rows.Count
StrTmp = "": j = 0: k = 0
With .Range
With .Find
.ClearFormatting
.Replacement.ClearFormatting
.Format = False
.Forward = True
.Text = "[!\(]" & Split(Tbl.Cell(i, 1).Range.Text, vbCr)(0) & "[!\)]"
.MatchWildcards = True
.Execute
End With
Do While .Find.Found
If Not .InRange(Rng) Then Exit Do
j = j + 1
If k <> .Duplicate.Information(wdActiveEndAdjustedPageNumber) Then
k = .Duplicate.Information(wdActiveEndAdjustedPageNumber)
StrTmp = StrTmp & k & " "
End If
.Collapse wdCollapseEnd
.Find.Execute
Loop
End With
Tbl.Cell(i, 4).Range.Text = j
StrTmp = Replace(Trim(StrTmp), " ", ",")
If StrTmp <> "" Then
'Add the current record to the output list (StrOut)
StrTmp = Replace(Replace(ParseNumSeq(StrTmp, "&"), ",", ", "), " ", " ")
End If
Tbl.Cell(i, 5).Range.Text = StrTmp
Next
End With
Set Rng = Nothing: Set Tbl = Nothing
Application.ScreenUpdating = True
End Sub
Function ParseNumSeq(StrNums As String, Optional StrEnd As String)
'This function converts multiple sequences of 3 or more consecutive numbers in a
' list to a string consisting of the first & last numbers separated by a hyphen.
' The separator for the last sequence can be set via the StrEnd variable.
Dim ArrTmp(), i As Long, j As Long, k As Long
ReDim ArrTmp(UBound(Split(StrNums, ",")))
For i = 0 To UBound(Split(StrNums, ","))
ArrTmp(i) = Split(StrNums, ",")(i)
Next
For i = 0 To UBound(ArrTmp) - 1
If IsNumeric(ArrTmp(i)) Then
k = 2
For j = i + 2 To UBound(ArrTmp)
If CInt(ArrTmp(i) + k) <> CInt(ArrTmp(j)) Then Exit For
ArrTmp(j - 1) = ""
k = k + 1
Next
i = j - 2
End If
Next
StrNums = Join(ArrTmp, ",")
StrNums = Replace(Replace(Replace(StrNums, ",,", " "), ", ", " "), " ,", " ")
While InStr(StrNums, " ")
StrNums = Replace(StrNums, " ", " ")
Wend
StrNums = Replace(Replace(StrNums, " ", "-"), ",", ", ")
If StrEnd <> "" Then
i = InStrRev(StrNums, ",")
If i > 0 Then
StrNums = Left(StrNums, i - 1) & Replace(StrNums, ",", " " & Trim(StrEnd), i)
End If
End If
ParseNumSeq = StrNums
End Function
I have this form to enter new data to a table.
I would like to warn the user when he is entering an invoice number that already exist. Here is the code I have but its not working:
Private Sub CommandButton1_Click()
Dim L As Long
Dim Code As String
Dim TextBox2 As Long
Dim valFormula As String
valFormula = "=COUNTIFS($F12:$F1702,F1702,$D12:$D1702,D1702)=1"
If MsgBox("Confirm?", vbYesNo, "Confirming new invoice") = vbYes Then
With Worksheets("FACTURE")
L = Sheets("FACTURE").Range("D65535").End(xlUp).Row + 1 'Pour placer le nouvel enregistrement _ la premi_re ligne de tableau non vide
End With
With Me
Range("D" & L).Validation
.Add Type:=xlValidateCustom, _
AlertStyle:=xlValidAlertWarning, _
Formula1:="=COUNTIFS($F12:$F1702,F1702,$D12:$D1702,D1702)=1"
.InputTitle = ""
.ErrorTitle = "Duplicate alert"
.InputMessage = ""
.ErrorMessage = "This invoice number already exist. Continue?"
Range("B" & L).Value = .ComboBox2 & .ComboBox3
Range("C" & L).Value = (Now)
Range("D" & L).Value = .TextBox2
Range("E" & L).Value = .TextBox3
Range("F" & L).Value = .TextBox4
Range("G" & L).Value = .TextBox5
Range("K" & L).Value = .ComboBox1
Range("L" & L).Value = .ComboBox2
Range("M" & L).Value = .ComboBox3
Range("N" & L).Value = .TextBox9
Range("O" & L).Value = .TextBox10
Range("R" & L).Value = .TextBox39
Range("P" & L).Value = .TextBox40
Range("C" & L).Interior.ColorIndex = 0
If .OptionButton1 Then
FormatCell Range("B" & L), xlThemeColorAccent3
ElseIf .OptionButton2 Then
FormatCell Range("B" & L), xlThemeColorAccent1
ElseIf .OptionButton3 Then
FormatCell Range("B" & L), xlThemeColorAccent4
Else
FormatCell Range("B" & L), xlThemeColorAccent2
End If
End With
End If
End Sub
Any advice?
As Comintern suggested, use Find() method of Range object, with code like:
Set f = rngToSerachIn.Find(what:=factureNo, LookIn:=xlValues, lookat:=xlWhole)
where
f is a range variable where to store the range with the searched value
rngToSerachIn is the range where to search the value
factureNo is the value to search for
furthermore it seems to me your invoices will be stored in rows from 12 downwards, so it could be useful to write a generic function to get first empty cell in a given column of a given worksheet ranging from a certain row
Since it'd be a good practice to demand specific tasks to Sub/Function to improve both code readability and maintenance, you could do that for:
getting first empty row after last non empty one starting from a given row in a given column of a given worksheet
validating invoice number
filling worksheet ranges
formatting invoice cell
as follows:
Option Explicit
Private Sub CommandButton1_Click()
Dim L As Long
Dim factureWs As Worksheet
If MsgBox("Confirm?", vbYesNo, "Confirming new invoice") = vbNo Then Exit Sub
Set factureWs = Worksheets("FACTURE") '<--| set the worksheet you want to work with
L = GetLastNonEmptyRow(factureWs, "D", 12) + 1 '<--| get passed worksheet first empty row after last non empty one in column "D" from row 12 (included)
If L > 12 Then If Not CheckDuplicate(Me.TextBox2, factureWs.Range("D12:D" & L - 1)) Then Exit Sub '<--| exit if duplicated non accepted by the user
FillRanges factureWs, L '<--| fill worksheet ranges with userfom controls values
FormatInvoice factureWs.Range("B" & L) '<--| color invoice cell depending on option buttons values
End Sub
Function GetLastNonEmptyRow(ws As Worksheet, colIndex As String, firstRow As Long) As Long
Dim lastRow As Long
With ws
lastRow = .Cells(.Rows.Count, colIndex).End(xlUp).row ' <--| get last non empty row in given column
If lastRow = 1 Then If IsEmpty(.Range(colIndex & 1)) Then lastRow = 0 '<--| handle the case of an empty column
If lastRow < firstRow Then lastRow = firstRow - 1 '<--| handle the case the last non empty row is above the first passed one
End With
GetLastNonEmptyRow = lastRow
End Function
Function CheckDuplicate(factureNo As String, rng As Range) As Boolean
Dim f As Range
Set f = rng.Find(what:=factureNo, LookIn:=xlValues, lookat:=xlWhole)
If Not f Is Nothing Then
CheckDuplicate = MsgBox("This invoice number already exist!" & vbCrLf & vbCrLf & "Continue?", vbExclamation + vbYesNo, "Duplicate alert") = vbYes
Else
CheckDuplicate = True
End If
End Function
Sub FormatInvoice(rng As Range)
Dim thColor As XlThemeColor
With Me
Select Case True
Case .OptionButton1
thColor = xlThemeColorAccent3
Case .OptionButton2
thColor = xlThemeColorAccent1
Case .OptionButton3
thColor = xlThemeColorAccent4
Case Else
thColor = xlThemeColorAccent2
End Select
End With
FormatCell rng, thColor
End Sub
Sub FillRanges(ws As Worksheet, L As Long)
With ws
.Range("C" & L).Value = (Now)
.Range("D" & L).Value = Me.TextBox2
.Range("E" & L).Value = Me.TextBox3
.Range("F" & L).Value = Me.TextBox4
.Range("G" & L).Value = Me.TextBox5
.Range("K" & L).Value = Me.ComboBox1
.Range("L" & L).Value = Me.ComboBox2
.Range("M" & L).Value = Me.ComboBox3
.Range("N" & L).Value = Me.TextBox9
.Range("O" & L).Value = Me.TextBox10
.Range("R" & L).Value = Me.TextBox39
.Range("P" & L).Value = Me.TextBox40
End With
End Sub
you may find it useful and follow this pattern in your subsequent coding
I'm trying to set a company signature and then implement it with GPO.
Here's what I'm trying to accomplish:
John Hancock | Paralegal | Company, PC
<Logo (to the left of text)> 60 Test Street | PO Box 1389 | Testing, PA 19820
Phone: 555.555.5555| Fax: 555.555.5555 | Email: testing#testing.com (need this hyperlinked)
EDIT: Additional information from comments.
I'm trying to have different attributes (font size, font type, bold, etc) for the text in each particular line within the second row of the table. For example: Test text (this is bold and Calibri) - Test Text 2 (this is not bold and Arial). When I run the script as it stands, I get the logo on the left, in the first column, and a line of text to the right of the logo, in the second column. What I can't figure out is how to add another line of text, on the right, directly underneath the first line, and have that line of text show with different font attributes and such.
Here's the code I have so far:
Set objSysInfo = CreateObject("ADSystemInfo")
Set WshShell = CreateObject("WScript.Shell")
strUser = objSysInfo.UserName
Set objUser = GetObject("LDAP://" & strUser)
strName = objUser.FullName
strFirst = objUser.FirstName
strLast = objUser.LastName
strInitials = objUser.Initials
strOffice = objUser.physicalDeliveryOfficeName
strPOBox = objUser.postOfficeBox
strTitle = objUser.Description
strCred = objUser.info
strStreet = objUser.StreetAddress
strLocation = objUser.l
strPostCode = objUser.PostalCode
strPhone = objUser.TelephoneNumber
strMobile = objUser.Mobile
strFax = objUser.FacsimileTelephoneNumber
strEmail = objUser.mail
strCompany = objUser.Company
Const NUMBER_OF_ROWS = 1
Const NUMBER_OF_COLUMNS = 2
Set objWord = CreateObject("Word.Application")
Set objDoc = objWord.Documents.Add()
Set objSelection = objWord.Selection
Set objEmailOptions = objWord.EmailOptions
Set objSignatureObject = objEmailOptions.EmailSignature
Set objSignatureEntries = objSignatureObject.EmailSignatureEntries
Set objRange = objDoc.Range()
objDoc.Tables.Add objRange, NUMBER_OF_ROWS, NUMBER_OF_COLUMNS
Set objTable = objDoc.Tables(1)
Set objShape = objTable.Cell(1, 1).Range.Hyperlinks.Add(objSelection.InlineShapes.AddPicture("\\eg-fileserver\admin space\signature\logo.jpg"), "http://www.eastburngray.com",,,"")
objTable.Columns(1).Width = 20
objTable.Columns(2).Width = 320
objTable.Cell(1, 2).Range.Font.Bold = True
objTable.Cell(1, 2).Range.Font.Name = "Calibri"
objTable.Cell(1, 2).Range.Font.Size = 10
objTable.Range.ParagraphFormat.SpaceAfter = 0
objTable.Cell(1, 2).Range.Text = strFirst & strInitials & strLast & " | " & strOffice & " | " & strCompany
Set objSelection = objDoc.Range()
objSignatureEntries.Add "Full Signature", objSelection
objSignatureObject.NewMessageSignature = "Full Signature"
objDoc.Saved = True
objWord.Quit
The key to adding text with various formatting in Word is to work with a Range object. You can think of a Range like an invisible Selection, with the major difference that you can have as many Range objects as you need - there can be only one Selection. The trick to changing the formatting is to "collapse" the Range (think of it like pressing the Right- or Left-Arrow keys to a blinking "point", then continuing to type).
Edit Note: Based on bibadia's surmise that this is actually about VBScript and not VBA I've changed the tags in your question and am editing my Answer to fit VBScript. VBScript cannot use Word-specific object declarations and enumerations, so I've removed the "Dim As" and replaced all wdEnum with the Integer equivalent.
Using your code as a starting point, the approach could look something like this:
Dim rngCell
Set rngCell = objTable.Cell(1,2).Range
rngCell.ParagraphFormat.SpaceAfter = 0
rngCell.Text = strFirst & strInitials & strLast & " | " & _
strOffice & " | " & strCompany & vbCr
rngCell.Font.Bold = True
rngCell.Font.Name = "Calibri"
rngCell.Font.Size = 10
rngCell.Collapse 0 'wdCollapseEnd
rngCell.MoveEnd 1, -1 'wdCharacter, -1
rngCell.Text = strPhone & " | " & strFax & " | " & strEmail
rngCell.Font.Bold = False
rngCell.Font.Size = 8
Note 1: The order in which you do things is usually reversed from that when typing as a user: First populate the Range, then apply the formatting.
Note 2: When collapsing at the end of a cell, Word will move the Range position to the beginning of the following cell. Thus, the code moves the point back one character, putting it at the end of the previous (original) cell: rngCell.MoveEnd wdCharacter, -1
Note 3: I added a vbCr at the end of the first rngCell.Text to create the new paragraph within the table cell.
This macro works on line 5 ,so i need this macro to work on all lines in one sheet instead of one macro for each line. Row X and email range A:L are copy paste in all lines i.e.( X1 A1:L1 | X2 ,A2:L2 ...)
Dim X5 As Variant
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("X5").Value = 1 And X5 <> 1 Then
ActiveSheet.Range("A5:L5").Select
ActiveWorkbook.EnvelopeVisible = True
With ActiveSheet.MailEnvelope
.Introduction = " send thru macro "
.Item.To = "email#gmail.com"
.Item.Subject = "ALERT"
.Item.Send
End With
End If
X5 = Range("X5").Value
End Sub
Not sure if you got your answer or not so I am attempting to answer this question.
To make it flexible for any row, you can store the row of the current cell in a variable using Target.Row and then simply use that to construct your range.
Also to understand how Worksheet_Change works, you may want to see THIS
Is this what you are trying?
Dim X5 As Variant
Private Sub Worksheet_Change(ByVal Target As Range)
On Error GoTo Whoa
'~~> Check if the chnage happened to multiple cells
If Target.cell.CountLarge > 1 Then Exit Sub
Dim Rw As Long
'~~> Get the row number of the cell that was changed
Rw = Target.Row
If Range("X" & Rw).Value = 1 And X5 <> 1 Then
Application.EnableEvents = False
Range("A" & Rw & ":L" & Rw).Select
ActiveWorkbook.EnvelopeVisible = True
With ActiveSheet.MailEnvelope
.Introduction = " send thru macro "
.Item.To = "email#gmail.com"
.Item.Subject = "ALERT"
.Item.Send
End With
End If
X5 = Range("X" & Rw).Value
Letscontinue:
Application.EnableEvents = True
Exit Sub
Whoa:
MsgBox Err.Description
Resume Letscontinue
End Sub