I installed the latest kubernetes on my cluster, along with containerd and crictl. however, when it seems that I need to use sudo to work with containerd EG: sudo containerd ps. Without sudo, I get a permission denied errors.
based on kubernetes instruction, I need to add this:
sudo vim /etc/crictl.yaml
runtime-endpoint: unix:///var/run/containerd/containerd.sock
image-endpoint: unix:///var/run/containerd/containerd.sock
timeout: 10
debug: true
So when I use crictl it'll point to containerd. however, when I perform crictl pods it gives me a permission denied error. Is it possible to work with crictl / containerd without sudo?
Can't seem to find much information online, a lot of it is related to docker.
Related
I have installed OracleVM, and created an Ubuntu machine. I have not tried any major cluster or tried deploying anything, I have started reading about Kubernetes and as an example just tried creating a simple pod. But I am getting host error, can anyone tell me where am I going wrong?
I have tried the simple kubectl run command
The snip of my issue
You need to disable swap on the system for kubelet to work. You can disable swap with sudo swapoff -a and restart kubelet service sudo systemctl restart kubelet
I follow this to install kubernetes on my cloud.
When I run command kubectl get nodes I get this error:
The connection to the server localhost:6443 was refused - did you specify the right host or port?
How can I fix this?
If you followed only mentioned docs it means that you have only installed kubeadm, kubectl and kubelet.
If you want to run kubeadm properly you need to do 3 steps more.
1. Install docker
Install Docker ubuntu version. If you are using another system chose it from left menu side.
Why:
If you will not install docker you will receive errror like below:
preflight] WARNING: Couldn't create the interface used for talking to the container runtime: docker is required for container runtime: exec: "docker": e
xecutable file not found in $PATH
error execution phase preflight: [preflight] Some fatal errors occurred:
[ERROR FileContent--proc-sys-net-bridge-bridge-nf-call-iptables]: /proc/sys/net/bridge/bridge-nf-call-iptables does not exist
[ERROR FileContent--proc-sys-net-ipv4-ip_forward]: /proc/sys/net/ipv4/ip_forward contents are not set to 1
[preflight] If you know what you are doing, you can make a check non-fatal with `--ignore-preflight-errors=...`
To see the stack trace of this error execute with --v=5 or higher
2. Initialization of kubeadm
You have installed properly kubeadm and docker but now you need to initialize kubeadm. Docs can be found here
In short version you have to run command
$ sudo kubeadm init
After initialization you will receive information to run commands like:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
and token to join another VM to cluster. It looks like
kubeadm join 10.166.XX.XXX:6443 --token XXXX.XXXXXXXXXXXX \
--discovery-token-ca-cert-hash sha256:aXXXXXXXXXXXXXXXXXXXXXXXX166b0b446986dd05c1334626aa82355e7
If you want to run some special action in init phase please check this docs.
3. Change node status to Ready
After previous step you will be able to execute
$ kubectl get nodes
NAME STATUS ROLES AGE VERSION
ubuntu-kubeadm NotReady master 4m29s v1.16.2
But your node will be in NotReady status. If you will describe it $ kubectl describe node you will see error:
Ready False Wed, 30 Oct 2019 09:55:09 +0000 Wed, 30 Oct 2019 09:50:03 +0000 KubeletNotReady runtime network not ready: Ne
tworkReady=false reason:NetworkPluginNotReady message:docker: network plugin is not ready: cni config uninitialized
It means that you have to install one of CNIs. List of them can be found here.
EDIT
Also one thing comes to my mind.
Sometimes when you turned off and on VM you need to restart
kubelet and docker service. You can do it by using
$ service docker restart
$ systemctl restart kubelet
Hope it helps.
Looks like kubeconfig file is missing.. Did you copy admin.conf file to ~/.kube/config ?
Verify if there are any proxies set like "http_proxy" or "https_proxy", mostly we set it as environment variables. If yes, then remove the proxies and it should work for you.
I did the following 2 steps. The kubectl works now.
$ service docker restart
$ systemctl restart kubelet
I am looking to execute
apt install tcpdump
but facing permission denial, upon looking to set the directory to root, it is asking me for password and I don't know from where to get that password.
I installed nginx helm chart from stable/nginx repository with no RBAC
Please see snapshot for details on error, while I tried installing tcpdump in the pod after doing ssh into it.
In Using GDB with Nginx, you can find troubleshooting section:
Shortly:
find the node where your pod is running (kubectl get pods -o wide)
ssh into the node
find the docker_ID for this image (docker ps | grep pod_name)
run docker exec -it --user=0 --privileged docker_ID bash
Note: Runtime privilege and Linux capabilities
When the operator executes docker run --privileged, Docker will enable access to all devices on the host as well as set some configuration in AppArmor or SELinux to allow the container nearly all the same access to the host as processes running outside containers on the host. Additional information about running with --privileged is available on the Docker Blog.
Additional resources:
ROOT IN CONTAINER, ROOT ON HOST
Hope this help.
I have set up my master node and I am trying to join a worker node as follows:
kubeadm join 192.168.30.1:6443 --token 3czfua.os565d6l3ggpagw7 --discovery-token-ca-cert-hash sha256:3a94ce61080c71d319dbfe3ce69b555027bfe20f4dbe21a9779fd902421b1a63
However the command hangs forever in the following state:
[preflight] Running pre-flight checks
[WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
Since this is just a warning, why does it actually fails?
edit: I noticed the following in my /var/log/syslog
Mar 29 15:03:15 ubuntu-xenial kubelet[9626]: F0329 15:03:15.353432 9626 server.go:193] failed to load Kubelet config file /var/lib/kubelet/config.yaml, error failed to read kubelet config file "/var/lib/kubelet/config.yaml", error: open /var/lib/kubelet/config.yaml: no such file or directory
Mar 29 15:03:15 ubuntu-xenial systemd[1]: kubelet.service: Main process exited, code=exited, status=255/n/a
Mar 29 15:03:15 ubuntu-xenial systemd[1]: kubelet.service: Unit entered failed state.
First if you want to see more detail when your worker joins to the master use:
kubeadm join 192.168.1.100:6443 --token m3jfbb.wq5m3pt0qo5g3bt9 --discovery-token-ca-cert-hash sha256:d075e5cc111ffd1b97510df9c517c122f1c7edf86b62909446042cc348ef1e0b --v=2
Using the above command I could see that my worker could not established connection with the master, so i just stoped the firewall:
systemctl stop firewalld
This can be solved by creating a new token
using this command:
kubeadm token create --print-join-command
and use the token generated for joining other nodes to the cluster
The problem had to do with kubeadm not installing a networking CNI-compatible solution out of the box;
Therefore, without this step the kubernetes nodes/master are unable to establish any form of communication;
The following task addressed the issue:
- name: kubernetes.yml --> Install Flannel
shell: kubectl -n kube-system apply -f https://raw.githubusercontent.com/coreos/flannel/bc79dd1505b0c8681ece4de4c0d86c5cd2643275/Documentation/kube-flannel.yml
become: yes
environment:
KUBECONFIG: "/etc/kubernetes/admin.conf"
when: inventory_hostname in (groups['masters'] | last)
I did get the same error on CentOS 7 but in my case join command worked without problems, so it was indeed just a warning.
> [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker
> cgroup driver. The recommended driver is "systemd". Please follow the
> guide at https://kubernetes.io/docs/setup/cri/ [preflight] Reading
> configuration from the cluster... [preflight] FYI: You can look at
> this config file with 'kubectl -n kube-system get cm kubeadm-config
> -oyaml' [kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.14" ConfigMap in the kube-system namespace
As the official documentation mentions, there are two common issues that make the init hang (I guess it also applies to join command):
the default cgroup driver configuration for the kubelet differs from
that used by Docker. Check the system log file (e.g. /var/log/message)
or examine the output from journalctl -u kubelet. If you see something
like the following:
First try the steps from official documentation and if that does not work please provide more information so we can troubleshoot further if needed.
I had a bunch of k8s deployment scripts that broke recently with this same error message... it looks like docker changed it's install. Try this --
previous install:
apt-get isntall docker-ce
updated install:
apt-get install docker-ce docker-ce-cli containerd.io
How /var/lib/kubelet/config.yaml is created?
Regarding the /var/lib/kubelet/config.yaml: no such file or directory error.
Below are steps that should occur on the worker node in order for the mentioned file to be created.
1 ) The creation of the /var/lib/kubelet/ folder. It is created when the kubelet service is installed as mentioned here:
sudo apt-get update && sudo apt-get install -y apt-transport-https curl
curl -s https://packages.cloud.google.com/apt/doc/apt-key.gpg | sudo apt-key add -
cat <<EOF | sudo tee /etc/apt/sources.list.d/kubernetes.list
deb https://apt.kubernetes.io/ kubernetes-xenial main
EOF
sudo apt-get update
sudo apt-get install -y kubelet kubeadm kubectl
sudo apt-mark hold kubelet kubeadm kubectl
2 ) The creation of config.yaml. The kubeadm join flow should take place so when you run kubeadm join, kubeadm uses the Bootstrap Token credential to perform a TLS bootstrap, which fetches the credential needed to download the kubelet-config-1.X ConfigMap and writes it to /var/lib/kubelet/config.yaml.
After a successful execution you should see the logs below:
.
.
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Starting the kubelet
.
.
So, after these 2 steps you should have /var/lib/kubelet/config.yaml in place.
Failure of the kubeadm join flow
In your case, it seems that the kubeadm join flow failed which might happen due to multiple reasons like bad configuration of iptables, ports that are already in use, container runtime not installed properly, etc' - as described here and here.
As far as I know, the fact that no networking CNI-compatible solution was in place should not affect the creation of /var/lib/kubelet/config.yaml:
A) We can see the under the kubeadm preflight checks what issues will cause the join phase to fail.
B ) I also tested this issue by removing the current solution I used (Calico) and ran kubeadm reset and kubeadm join again and no errors appeared in the kubeadm logs (I've got the successful execution logs I mentioned above) and /var/lib/kubelet/config.yaml was created properly.
(*) Of course that the cluster can't function in this state - I just wanted to emphasize that I think the problem was one of the options mentioned in A.
I'm following steps mentioned here to configure kubernete cluster.But when I'm executing kubectl get nodes to check the status of my newly created cluster, that time I'm getting error message The connection to the server localhost:8080 was refused - did you specify the right host or port?
In this link it is mentioned for Ubuntu 14.04 LTS 64bit server, but I'm using Ubuntu 16,04 64 Bit.
Can you expert please help me to solve this issue?
You need to run the following commands (as a regular user) after you have initialized your cluster:
sudo cp /etc/kubernetes/admin.conf $HOME/
sudo chown $(id -u):$(id -g) $HOME/admin.conf
export KUBECONFIG=$HOME/admin.conf
Follow this issue on GitHub if you still encounter it.
The document your following is more then year old, its not update to date steps.
I would recommend creating cluster using the kubeadm with version v.1.7.0
https://kubernetes.io/docs/setup/independent/create-cluster-kubeadm/
use this configure master
kubeadm init --pod-network-cidr=10.244.0.0/16 --kubernetes-version v1.7.0
It looks like your client configuration thinks the server runs on localhost:8080 which is probably not the case.
Can you look at the ~/.kube/config file to see what is configured there?
Also try running kubectl --server=<SERVER_IP>:<SERVER_PORT> get nodes and see if this helps.