I think I'm hitting some sort of edge case here. As mentioned on that other question I have two rbt instances that are kept sync by the selected attribute. When the component is "fresh" (i.e. no selected value prefilled), if the user writes a search string, in this case an address (number street, city) and then changes the number by erasing one character, it works as expected:
However on another rbt instance, where the searched value is prefilled as the selected attribute, it does not perform the search when the user erases one character, only when they type a character again (and only then it refreshes on backspace):
Any suggestions on how could I fix this?
P.S.: you have been very helpful and your help is much appreciated. Do you have some way of supporting your work? Thanks a lot! :)
Related
I am new to VBA and am currently still studying the most basic ideas of the language. I haven't gotten that far in my VBA Code studies to write the code I need by hand, so, in the mean time, I have been using the VBA Editor to enter Property Values via the Properties Window. This has been proving far more difficult than I anticipated. My Goal is to create a drop down list for a VBA Form. I understand one of my options is to reference a range of cells in my excel worksheet by inputting it into the value field located right of the ControlSource Property. My attempts to input the desired range always comes up with the same error:
Could not set the ControlSource Property. Invalid Property Value.
I have tried looking in the VBA Help files and even searched online. I haven't had any luck finding the proper syntax to enter into this field.
I am assuming I may run into similar issues as I try to set other property values through the Property Window. Thus, I am diligently studying my VBA courses so I can simply write the raw code. But that takes time and I need this form to work as soon as possible.
Is there anyone out there that wouldn't mind lending me their brain for a moment? I would be most grateful. Having this working would bring a lot of stress off of me.
Thanks for reading!
What tigeravatar mentioned, works fine for me, for the ComboBox as well for the ListBox.
If I enter =a1:b5 into the ComboBox' RowSource, I see the values of the cells if I open the form and the Combobox. Tigeravatar's notation with $ and sheet! may be more reliable for the productive version.
The RowSource is where the boxes get their displayed items from. The ControlSource is where the chosen value finally is linked to. So if I write just A10 to the ControlSource, then open the form, then pick a value, close the form, I see the chosen value filled to the Excelsheet field A10.
Sometimes it helps to start a fresh UserForm and to add some simple fresh controls. If you seek around, you will probably alter property values that influence the behaviour in an unexpected way, and then you get lost. I have tested with Office 2010. If you have another version, it may be important to forum readers to know.
I'm trying to implement a live search combo. It suppose to work like this:
When I enter a character into the combo field I read the current value and send it as a parameter to the store's url. In the backend the parameter is used to return any value from the database that contains it, so the store behind the combo gets filled only with those filtered values.
As I continue to enter characters into the combo, the parameter should be updated and sent again to the backend and so on, getting like this a smaller and smaller store.
I tryied to achieve this behaviour using the combo's event keypress, even keyup, but the problem is it's impossible for me to get access to the current value from the combo field.
For example, when I entered the "for" string into the combo, how can I obtain this value using the combo object? comboName.getValue() doesn't work, it returns nothing "".
I already saw the live combo example here: http://docs.sencha.com/extjs/4.2.2/#!/example/form/forum-search.html but doesnt help me at all.
So my big question is: how do i get the current value while still editing the combo's field?
Any help would be appreciated, thanks.
You should be able to use
comboName.getValue();
or
comboName.getRawValue();
Where comboName is your combo box. Are neither working- I note in your post you state getValues() which is an improper method. You may want to also check whether when you're referring to your combo box object, that the reference is actually correct. The first argument from the key events is actually the object itself, so you should be able to do, e.g.
listeners:{
keyup:function(comboBox){
var value = comboBox.getValue() || comboBox.getRawValue();
console.log(value);
}
}
Swapping you the value getting method as appropriate.
I found that the combo already has a quick search behaviour, I just have to set queryMode on 'remote' and some other small configurations. More details here:
Ext Js 4.2.2 combobox queryMode
In Articulate's Storyline product, how does one retrieve the total number of slides (or pages) in a storyfile or project?
There's not much documentation so it's kind of hard to figure out how to query common environment values like this. If we can get the total number of slides then we don't have to manually set a value for it.
One must manually set and update a variable to store the number of slides.
The most lengthy conversation on the matter seems to be found here at the Articulate forums.
In that thread the users and staff describe the need to manually define such a variable.
I asked the question on the official forum more directly here, and so far have not received a response.
Another poster at that forum mentioned using PHP to solve this problem, but unfortunately we can't add the requirement of PHP to the final product. I'm sure some server side language tricks might be used to solve this issue, but that also adds the dependency of a particular server-side language.
The Answer Mark gave is correct. So if you want to track the number of question slides in a quiz you would either hard code the value in a variable such as totalQuestions, or increment it as you go through each slide using adjust variable trigger. To call that value and display it on screen you would just add it to a text field and surround it with "%".
EG. "You have answered %Results.ScorePoints% out of %totalQuestions% questions correctly."
I find it rather pointless to hard code it since it's just as easy to put the value in the text field at the end. Using the increment method seems more logical because then you can add more question slides without having to adjust the variable or results screen each time.
I usually load frame.xml, browse for all slidelink tags and sort all slides by their Id.
Usually you get something like slideid=_player.5xoxGTW6QCh.6bmeRt3tCqP, where 5xoxGTW6QCh is the scene id and 6bmeRt3tCqP is the slide id. displaytext also gives you the slide title.
If you browse for slidetranscript and match the Id for each transcript you also get the slide notes.
Articulate 360 now has an internal (Built-in) variable for this and other counts. See Project.TotalSlides and Menu.TotalSlides
See https://community.articulate.com/series/articulate-storyline-360/articles/storyline-360-add-slide-numbers
I'm probably biting off more than I can chew with this particular problem, but I'll try to be as specific as possible in case it's within my scope. Disclaimer: I'm not terribly experienced with MS Word, beyond simple data entry/some formatting, and I have absolutely zero experience working with macros or VBasic. Unfortunately, I'm afraid the solution to my problem will come in the form of one of those last two.
THE GOAL:
What I want to do is to have placeholder text throughout my template document that will change content but not formatting when the first instance of it is changed. Basically, I'm writing a template for support manuals for a software suite. Each app has certain similar features like the menu bar, data entry screen, diagnostic log screen, transaction history, etc., so I am pre-writing those sections and using placeholders when I need to insert certain app specific properties.
I started off using the Insert->Quick Parts->Document Property->Subject tool which I used as a placeholder for the app name. I set the Property to [Subject] and then used Insert->Quick Parts->Field->Subject throughout the document, wherever I needed to include the app name. This worked fine in this case because the app name will always be capitalized. I simply change the text in the first [Subject] (which is content controlled) and update the fields throughout the document, and they all match nicely, easy-peasy, work done, go home and drink beer, right?
Not quite.
Our software handles part tracking via scanners and SQL Server, so while the interface and menu in the apps remains largely unchanged, the parts they track change from app to app. Because of this, I need to change the part name when I reference it within the text of the manuals; for example, if I'm working in ToiletPap.app and our TP is tracked by the roll, I need every mention of [Component] to be changed to roll. If I'm working in LightBulbs.app, I need [Component] to say bulb.
My first efforts went toward creating a custom doc property called Component using the Advanced tab under the Document Properties dropmenu. I then created a plaintext content control around my first [Component] titled Component and made my next [Component] a field with modified code: {COMPONENT * MERGEFORMAT}. This comes from copying what I can find when [Subject] works. This didn't work at all; updating the text in the first CC doesn't change the Content doc prop, and my fields return "!Undefined Bookmark, COMPONENT".
I got close to what I need by using the [Comments] doc property, set initially to [Component]. I used it just like [Subject], but (this is when I realized that capitalization was going to be an issue) when I mention my [component] in-text, as often as not, I need to to be lowercase instead of upper.
I've looked on MS's forums and a few others as well as here on SO, and I can't find anyone who's trying to do the same thing, much less an answer to how. Please keep in mind when answering, it would be a great help to me if you would include step-by-step instructions on how to enter/implement the code you provide because, as I mentioned, I have no idea how to go about editing macros/VBasic for MS Word.
To restate and summarize my overall question: How can I use a placeholder that displays the text "[Component]" so that, when I change the first instance of [Component] to something else, say "hopper", every subsequent instance of [Component] is updated to hopper but maintains its current capitalization and formatting scheme?
Apologies for the length of the request, but I wanted to make sure I explained the situation as accurately as possible. Thanks in advance for your consideration and responses.
I managed to solve this one after a couple extra hours of tinkering. I didn't need macros or VBasic, either.
On the first instance of [component] I created a plain-text content control to act as a container (not a necessity, but it makes it look nicer. Will likely cause a problem eventually, but for now, it's working as intended) and bookmarked it. Then, for all other instances of [container] I selected each and used Insert->Quick Parts->Field->Ref with the following field code:
REF Text1 \*Lower
Where "Text1" is my bookmark and "*Lower" indicates all lower case. The *Lower can be replaced with *Upper or *FirstCap to indicate all upper case or capitalize the first letter respectively. Now, each field reflects the text of the first with the capitalization appropriate to each field's location within the document. Just like using the doc prop with [Subject], ^a -> f9 is needed to update all fields within the document.
I am stumped beyond belief.
I have a select box being generated by the cakephp form helper. I am feeding it an array of options, and passing an empty value... pretty standard stuff.
However, my "empty" field is showing up at the very bottom of the list.. not the top. So when the field loads, it just defaults to the first option... which is not the "empty" option.
Not a whole lot of room for error on the code here..
echo $this->Form->input('whatever',array('empty'=>'Choose One','options'=>$categories));
The only small item that might be important, is that $categories is a multi-array, so the select box has optgroups & options.
Is there some quirk/bug out there that I do not know of that is trying to force me to sneak into my scotch supply a few hours ahead of schedule?
edit: using the latest release of cakephp 1.3.x
I think that I once had the same problem.
It turned out to be the data (options array).
Is there an option with an empty key? probably the last one then.
this lead to the scenario I remember and seems to be the exact same thing.
the form helper will override this empty key value pair then and not create a second one.
without more infos from your end this will be difficult to solve.