Currently, my vs code will only take 100 characters on one line.
Can someone tell me how do I change these settings.
I tried File-->Preferences-->Settings but I cannot find the right option.
This is how you can set number of characters in one line in VS Code:
Open Settings in VS Code and search for "word wrap". Select "wordWrapColumn" in Word Wrap dropdown.
If you scroll down, you will find "Word Wrap Column" with input field. There you can define number of characters like "100".
Related
I've recently noticed that when typing out long lines of code, they split into multiple lines after this threshold and it bothers me. enter image description here
Not sure if it was a formatting extension that I put on here years ago, but I couldn't seem to locate it in the settings.
The grey line isn't what causes the wrapping. You can apply settings to have the grey line and not have wrapping. They grey line is displayed according to the editor.ruler setting.
In general text editor terminology, this wrapping you are observing is called "soft wrapping" (when an editor wraps long lines in its rendering of the text, but doesn't actually insert line-break characters, which is called "hard wrapping").
By default, soft-wrapping can be toggled by Alt+z (The command palette command is named View: Toggle Word Wrap).
The default setting of soft wrapping for VS Code is configurable by the editor.wordWrap setting. It has several values it can take on:
"bounded": lines wrap at the minimum of viewport width and editor.wordWrapColumn,
"off": Lines will never wrap
"on": Lines will wrap at the viewport width
"wordWrapColumn": Lines will wrap at editor.wordWrapColumn
The word wrap column is configurable by the editor.wordWrapColumn setting. See also the editor.wrappingIndent and wrappingStrategy settings.
This is a setting called rulers. Go into Settings and search "rulers". Then you will be able to edit the settings.json file. Under "editor.rulers" remove all values in the array so that it is empty. That should solve it.
I'm using visual studio code and run into a weird problem. I'm not sure how I got here - I could have accidently pressed a shortcut unknowingly.
I'm trying to select a phrase, link or anything that crosses multiple lines (whether the lines are true lines or due to word wrap). When I select multiple lines, it doesn't automatically select the text at the start and end between the two points. Rather, it just selects the length of text for that line and repeats it in the subsequent lines. See the image below to understand.
Image of issue
As you can see, I am trying to select the words from "the" to the end of "sub". Instead of selecting all the words between the two, it selects the text "the instru" and selects every line with the same amount of characters/length.
In order to show what I am expecting, I have pasted the text into Notepad and done the same thing.
What I am expecting
As you can see, all the words between "the" and "sub" are selected.
If anyone has any idea about how to fix this, I would be greatly appreciative.
Below is a copy of the text if the images don't display.
Follow the instructions below for a click guide to retire and/or add 'School'.
Best practice if there is a change in 'School' structure would be to 'retire' any existing school setup that is no longer required and add the new sub school information. The reason why we don't just edit existing school names (typically) is due to leaving historical data intact.
Try using ctrl+shift+P and typing "Toggle Column Selection Mode"
When double-clicking a number:
100%: selects "100" (good)
100px: selects "100px" (bad)
To more rapidly change number values, it would be great if VS Code could ignore units of measure when double-clicking a number like it does with symbols.
This seems like a feature that would be part of Editor: Word Separators, but it looks like you can only add single characters to the list.
Does anyone know if it's possible to change this? Thanks!
With the extension Select By you can specify with an regular expression what you consider a "word" and with a keybinding you are faster than using the mouse in selecting.
Use the surround property, see the link.
I'm seeking a command that when I highlight a paragraph of text in Visual Studio Code will let me remove all line breaks, and correspondingly a command that if I highlight a paragraph without line breaks will insert them at the end of the display width.
It wont be enough to just use Alt-Z because that just makes the display show the line wrapping but doesn't actually insert the line breaks.
For context: I'm using a VS Code latex plugin which is a compiled text editor format. Errors in this system trace back to line numbers so if you don't have line breaks you have to hunt down the error somewhere in a large paragraph. But of course this being a text document there you often have to edit paragraphs and end-of-lines become jagged and hard to read/update.
You can set this behavior searching for "Word Wrap" in the settings. Set to "on" to wrap the words.
Found a solution, maybe it will help someone in the future.: install "rewrap" extension. Select portion of text, and use Alt-q. Seems to work like Emacs' M-q command. (Thx Grant)
I'm trying to use the multi cursor functionality of vscode on a large(ish) file.
the file is too large to select every line individually with ctrl-alt-up or down. In sublime-text I would select everything and push ctrl-shift-l. Is there a similar thing in vscode. I've tried using a regex search for ^, but that gives me an error stating "Expression matches everything".
The command Selection / Add Cursors to Line Ends altshifti will put a cursor on every line in the current selection. (For mac use optshifti)
Tip: You can pull up the keyboard shortcut reference sheet with ctrlk,ctrls (as in, those two keyboard combos in sequence).
(For mac use cmdk,cmds)
Hold Alt+Shift and select the block. Then press End or Right button.
You get selected individual lines.
I use version VSCode 1.5.3 in Windows.
Hold Alt+Shift+i
Hold Home (fn+-> Mac) for right-most or End for left most(fn+<- Mac)
This feature is actually called split selection into lines in many editors.
Sublime Text uses the default keybinding, CTRLSHIFT L
VSCode uses ALTSHIFTI
For Atom you actually need to edit your keymap to something like this
'.platform-win32 .editor, .platform-linux .editor':
'ctrl-shift-L': 'editor:split-selections-into-lines'
Real Lines vs Display Lines
First we have to understand the difference between Real Lines and Display Lines to completely understand the answer of the question.
When Word Wrap is enabled, each line of text that exceeds the width of the window will display as wrapped. As a result, a single line in the file may be represented by multiple lines on the display.
The easiest way to tell the difference between Real Lines and Display Lines is by looking at the line number in the left margin of the text editor. Lines that begin with a number correspond to the real lines, which may span one or more display lines. Each time a line is wrapped to fit inside the window, it begins without a line number.
Cursor At the Beginning of each Display Lines:
Cursor At the Beginning of each Real Lines:
Answer to the Question
Now that we know the difference between Display Lines and Real Lines, we can now properly answer the actual question.
Hold AltShift and select the text block.
Press Home to put cursor on the beginning of every Display Line.
Press End to put cursor on the end of every Display Line.
Press HomeHome (Home twice) to put cursor on the beginning of every Real Line.
Press EndEnd (End twice) to put cursor on the end of every Real Line.
Please understand that AltShiftI put cursor on the end of every Real Line.
Install the extension Sublime Commands.
[Sublime Commands] Adds commands from Sublime Text to VS Code: Transpose, Expand Selection to Line, Split into Lines, Join Lines.
(Don't forget to add the keybinding(s) from the extensions details page to your keybindings.json)
Doesn't VS Code already have a "split into lines" command?
Yes, yes it does. However it differs from the one in Sublime.
In VS Code, when you split into lines your selection gets deselected and a cursor appears at the end of each line that was selected (except for the last line where the cursor appears at the end of the selection).
In Sublime, when you split into lines a cursor appears at the end of each line (with the same exception as in VS Code) and the selection is divided on each line and "given" to the same line.
I have the same problem, i'm used to Alt + drag to do 'box selections' in visual studio but it does'n work in code.
It seems to be impossible for now to do it differently than by selecting every single line.
However plugins should be supported soon so we will likely see a plugin for this if not implemented directly by microsoft.
From visual studio uservoice forums:
We plan to offer plugin support for Visual Studio Code. Thank you for your interests and look for more details in our blog in the coming weeks. http://blogs.msdn.com/b/vscode.
For the preview we are looking for exactly this type of feedback. Keep it coming.
Sean McBreen – VS Code Team Member