We have a legacy SOAP web-services that we are rewriting so we have taken the WSDL files from old web-services and wrote the service side web-services using apache cxf. There are several clients that are using these web-services (so we cannot change anything on client side). Below is old / existing sample soap call-
EXISTING / OLD -
<s:Envelope
xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<s:Header>
<o:Security s:mustUnderstand="1"
xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<u:Timestamp u:Id="_0">
<u:Created>2022-12-09T13:05:53.322Z</u:Created>
<u:Expires>2022-12-09T13:15:53.322Z</u:Expires>
</u:Timestamp>
<o:UsernameToken u:Id="uuid-62444dfc-4a39-4c03-8761-15eb4410d435-1">
<o:Username>****</o:Username>
<o:Password>****</o:Password>
</o:UsernameToken>
</o:Security>
</s:Header>
<s:Body
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<readPersonIn
xmlns="http://j2ee.netbeans.org/wsdl/UpdatePerson">
<GPN>ABCDEF</GPN>
<UserId>BCDEFF</UserId>
<Brand>GOLU</Brand>
</readPersonIn>
</s:Body>
</s:Envelope>
We used the wsdl and wrote the SOAP api that accepts below call perfectly.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:upd="http://j2ee.netbeans.org/wsdl/UpdatePerson">
<soapenv:Header>
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:UsernameToken wsu:Id="UsernameToken-45845DC0AB964F817E15567362394917">
<wsse:Username>******</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">*****</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
<soapenv:Body>
<upd:readPersonIn>
<upd:GPN>12345</upd:GPN>
<upd:UserId>BCDEFF</upd:UserId>
<upd:Brand>GOLU</upd:Brand>
</upd:readPersonIn>
</soapenv:Body>
</soapenv:Envelope>
However when we play the legacy / old client call to newly written SOAP API we are getting below exception-
Dec 12, 2022 4:46:23 PM org.apache.cxf.phase.PhaseInterceptorChain doDefaultLogging
WARNING: Interceptor for {http://j2ee.netbeans.org/wsdl/Person}PersonPortTypeService has thrown exception, unwinding now
org.apache.cxf.binding.soap.SoapFault: A security error was encountered when verifying the message
at org.apache.cxf.ws.security.wss4j.WSS4JUtils.createSoapFault(WSS4JUtils.java:233)
at org.apache.cxf.ws.security.wss4j.WSS4JInInterceptor.handleMessageInternal(WSS4JInInterceptor.java:317)
at org.apache.cxf.ws.security.wss4j.WSS4JInInterceptor.handleMessage(WSS4JInInterceptor.java:171)
at org.apache.cxf.ws.security.wss4j.WSS4JInInterceptor.handleMessage(WSS4JInInterceptor.java:80)
at org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:308)
at org.apache.cxf.transport.ChainInitiationObserver.onMessage(ChainInitiationObserver.java:121)
at org.apache.cxf.transport.http.AbstractHTTPDestination.invoke(AbstractHTTPDestination.java:252)
at org.apache.cxf.transport.servlet.ServletController.invokeDestination(ServletController.java:234)
at org.apache.cxf.transport.servlet.ServletController.invoke(ServletController.java:208)
at org.apache.cxf.transport.servlet.ServletController.invoke(ServletController.java:160)
at org.apache.cxf.transport.servlet.CXFNonSpringServlet.invoke(CXFNonSpringServlet.java:180)
at org.apache.cxf.transport.servlet.AbstractHTTPServlet.handleRequest(AbstractHTTPServlet.java:299)
at org.apache.cxf.transport.servlet.AbstractHTTPServlet.doPost(AbstractHTTPServlet.java:218)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:652)
at org.apache.cxf.transport.servlet.AbstractHTTPServlet.service(AbstractHTTPServlet.java:274)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:231)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:166)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:202)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:97)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:542)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:143)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:92)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:78)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:343)
at org.apache.coyote.http11.Http11Processor.service(Http11Processor.java:374)
at org.apache.coyote.AbstractProcessorLight.process(AbstractProcessorLight.java:65)
at org.apache.coyote.AbstractProtocol$ConnectionHandler.process(AbstractProtocol.java:888)
at org.apache.tomcat.util.net.NioEndpoint$SocketProcessor.doRun(NioEndpoint.java:1597)
at org.apache.tomcat.util.net.SocketProcessorBase.run(SocketProcessorBase.java:49)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
at org.apache.tomcat.util.threads.TaskThread$WrappingRunnable.run(TaskThread.java:61)
at java.lang.Thread.run(Thread.java:748)
Caused by: org.apache.wss4j.common.ext.WSSecurityException: An error was discovered processing the <wsse:Security> header
at org.apache.cxf.ws.security.wss4j.WSS4JInInterceptor.checkActions(WSS4JInInterceptor.java:361)
at org.apache.cxf.ws.security.wss4j.WSS4JInInterceptor.handleMessageInternal(WSS4JInInterceptor.java:276)
... 31 more
Our limitation is that we cannot change the client code (as we do not have any control and there are several places). It seems it is related to security header processing that new code is not able to process / validate the UserNameToken in old format. Any guidance / help will is appreciated ?.
TIA.
Vijay
We are playing old call with new soap api and getting error.
Related
I am trying to make a TOken request to the SABRE SOAP, I am using their examples but at the end I get this error:
<faultstring>Unable to create envelope from given source: Error on line 19 of document : The prefix "wsse" for element "wsse:Security" is not bound. Nested exception: The prefix "wsse" for element "wsse:Security" is not bound.</faultstring>
This is my request:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sec="http://schemas.xmlsoap.org/ws/2002/12/secext" xmlns:mes="http://www.ebxml.org/namespaces/messageHeader" xmlns:web="http://webservices.sabre.com">
<soapenv:Header>
<mes:MessageHeader mes:version="1">
<mes:From>
<mes:PartyId>Client</mes:PartyId>
</mes:From>
<mes:To>
<mes:PartyId>SWS</mes:PartyId>
</mes:To>
<mes:CPAId>DCG</mes:CPAId>
<mes:ConversationId>123</mes:ConversationId>
<mes:Service>Session</mes:Service>
<mes:Action>TokenCreateRQ</mes:Action>
<mes:MessageData>
<mes:MessageId>1234</mes:MessageId>
<mes:Timestamp>2015-01-01T00:00:00</mes:Timestamp>
</mes:MessageData>
</mes:MessageHeader>
<wsse:Security>
<wsse:UsernameToken>
<wsse:Username>USER</wsse:Username>
<wsse:Password>PASSWORD</wsse:Password>
<Organization>PCC</Organization>
<Domain>DOMAIN</Domain>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
<soapenv:Body>
<web:TokenCreateRQ Version="1.0.0"/>
</soapenv:Body>
</soapenv:Envelope>
and this is the WSDL file: http://files.developer.sabre.com/wsdl/sabreXML1.0.00/usg/TokenCreateRQ.wsdl
Any idea what is wrong?
Try this structure. The difference are namespaces under Security.
<wsse:Security xmlns:wsse="http://schemas.xmlsoap.org/ws/2002/12/secext" xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/12/utility">
<wsse:UsernameToken>
<wsse:Username>${#TestCase#Username}</wsse:Username>
<wsse:Password>${#TestCase#Password}</wsse:Password>
<Organization>${#TestCase#CPAId}</Organization>
<Domain>${#TestCase#Domain}</Domain>
</wsse:UsernameToken>
</wsse:Security>
The error is on the namespace declaration, used declared as sec but then used wsse.
Replace: xmlns:sec="http://schemas.xmlsoap.org/ws/2002/12/secext"
With: xmlns:wsse="http://schemas.xmlsoap.org/ws/2002/12/secext"
As a simple recommendation for looking into namespaces, you can import the WSDL into SoapUI and check the blank example auto-generated with all the possible elements for the request.
I apologize in advance if this post feels too long. But 1) this is my first post ever and 2) I have really been over the river and through the woods trying to figure this out.
The Add Service Reference feature in Visual Studio 2012 produces a proxy that (apparently) generates invalid SOAP messages. I suspect it has to do with serialization or how the proxy types are decorated but I cannot seem to figure it out. Help is much appreciated.
Detail 1. My environment is Visual Studio 2012 and I have created a .NET 4.5 class library with a service reference to https://sandbox-api.bancbox.com/v1/BBXPort?wsdl. I'm attempting to call the getClient() function; which is defined here. (http://www.bancbox.com/api/view/45)
The code looks like this:
public void GetClient()
{
// create an instance of the service reference proxy class
var bbx=newBBXClient();
bbx.ChannelFactory.Endpoint.Behaviors.Remove<System.ServiceModel.Description.ClientCredentials>();
bbx.ChannelFactory.Endpoint.Behaviors.Add(new CustomCredentials());
bbx.ClientCredentials.UserName.UserName="MY_USERNAME";
bbx.ClientCredentials.UserName.Password="MY_PASSWORD";
var customerId=newid {
subscriberReferenceId="44XX33YY"
};
var request=newgetClientRequest {
subscriberId=MY_SUBSCRIBER_ID,
clientId=customerId
};
var response=bbx.getClient(request);
}
Detail 2. I have made many successful calls into the web service via SoapUI. The successful SoapUI-produced SOAP messages look like this
<soapenv:Envelope xmlns:sch="schema.bancbox.com" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Header>
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:UsernameToken wsu:Id="UsernameToken-11">
<wsse:Username>MY_USERNAME</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">MY_PASSWORD</wsse:Password>
<wsse:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary">tRLo6AlRKl+/rULiKq6A6g==</wsse:Nonce>
<wsu:Created>2013-02-22T18:32:02.204Z</wsu:Created>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
<soapenv:Body>
<sch:getClient>
<getClientRequest>
<subscriberId>MY_SUBSCRIBER_ID</subscriberId>
<clientId>
<!--Optional:-->
<subscriberReferenceId>44XX33YY</subscriberReferenceId>
</clientId>
</getClientRequest>
</sch:getClient>
</soapenv:Body>
</soapenv:Envelope>
Detail 3. Per Fiddler, my failed SOAP messages look like this
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<s:Header>
<VsDebuggerCausalityData xmlns="http://schemas.microsoft.com/vstudio/diagnostics/servicemodelsink">uIDPozcAgEH0QhJHloqMBWUf3mAAAAAA5wy3enJkDUGU8IaMUCFyEjzfL+1Uez1HhAvEeFpJ+30ACQAA</VsDebuggerCausalityData>
<o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<o:UsernameToken u:Id="uuid-6e1c9f81-0651-41f7-b659-26b191bf7e13-1" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<o:Username>MY_USERNAME</o:Username>
<o:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">MY_PASSWORD</o:Password>
<o:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary">hGggJkxurSkHQ3MKoeBK6AmEHNs=</o:Nonce>
<u:Created>2013-02-23T11:24:47.663Z</u:Created>
</o:UsernameToken>
</o:Security>
</s:Header>
<s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<getClient xmlns="schema.bancbox.com">
<getClientRequest xmlns="">
<subscriberId>MY_SUBSCRIBER_ID</subscriberId>
<clientId>
<subscriberReferenceId>XX55YY22</subscriberReferenceId>
</clientId>
</getClientRequest>
</getClient>
</s:Body>
</s:Envelope>
The SOAP message above is produced when running the GetClient() method. GetClient throws the following Exception.
System.ServiceModel.FaultException
Unmarshalling Error: cvc-elt.4.2: Cannot resolve 'getClientRequest' to a type definition for element 'getClientRequest'.
When I replay the same failing message using SoapUI, I get the following response:
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<soap:Fault>
<faultcode>soap:Client</faultcode>
<faultstring>Unmarshalling Error: cvc-elt.4.2: Cannot resolve 'getClientRequest' to a type definition for element 'getClientRequest'. </faultstring>
</soap:Fault>
</soap:Body>
</soap:Envelope>
Detail 4. Based on my research, this indicates that the server on the other end is Apache CXS. It's choking on my SOAP request. So I started playing around with my SOAP message and submitting it via SoapUI.
The first glaring distance in the successful message and my fail message are these lines
SUCCESS
<sch:getClient>
<getClientRequest>
FAIL
<getClient xmlns="schema.bancbox.com">
<getClientRequest xmlns="">
So the first thing that I did was make my getClientRequest tag identical to the successful one.
<getClient xmlns="schema.bancbox.com">
<getClientRequest>
This produced the following response.
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<soap:Fault>
<faultcode>soap:Server</faultcode>
<faultstring>Found element {schema.bancbox.com}getClientRequest but could not find matching RPC/Literal part</faultstring>
</soap:Fault>
</soap:Body>
</soap:Envelope>
The next thing that I did is change the way the getClient tag is assigned a schema.
BEFORE
<getClient xmlns="schema.bancbox.com">
AFTER
<s:Envelope xmlns:bb="schema.bancbox.com" xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
. . .
<bb:getClient>
<getClientRequest>
. . .
</bb:getClient>
The resultant SOAP message looks like this and it is successful.
<s:Envelope xmlns:bb="schema.bancbox.com" xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<s:Header>
<VsDebuggerCausalityData xmlns="http://schemas.microsoft.com/vstudio/diagnostics/servicemodelsink">uIDPozcAgEH0QhJHloqMBWUf3mAAAAAA5wy3enJkDUGU8IaMUCFyEjzfL+1Uez1HhAvEeFpJ+30ACQAA</VsDebuggerCausalityData>
<o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<o:UsernameToken u:Id="uuid-6e1c9f81-0651-41f7-b659-26b191bf7e13-1" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<o:Username>MY_USERNAME</o:Username>
<o:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">MY_PASSWORD</o:Password>
<o:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary">hGggJkxurSkHQ3MKoeBK6AmEHNs=</o:Nonce>
<u:Created>2013-02-23T11:24:47.663Z</u:Created>
</o:UsernameToken>
</o:Security>
</s:Header>
<s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<bb:getClient>
<getClientRequest>
<subscriberId>MY_SUBSCRIBER_ID</subscriberId>
<clientId>
<subscriberReferenceId>XX55YY22</subscriberReferenceId>
</clientId>
</getClientRequest>
</bb:getClient>
</s:Body>
</s:Envelope>
So the million dollar questions are WHY and HOW.
*WHY does the .NET proxy class serialize the SOAP message the way it does?
*HOW do I fix it? How can I may my proxy serialize into the SOAP message above? How can I force the serializer to define shorthand for the message namespace in the Envelop and then use the shorthand in the message tag?
FYI, to even get to this point I had to get past a number of WCF WSE issues and ended up implementing the solution so generously provided on Rich Stahls blog. I would post the link but apparently I don't have enough rep.
From I understand, the SOAP message that WCF produces is syntactically correct. However, Java CXF web services are very rigid with regards to the SOAP messages that they will accept.
The solution to specific problem setting aliases for xml namespace definitions in the Operation node of the SOAP messages produced by WCF proxies involves implementing a Custom Message Inspector is detailed here: Force WCF to create an xml namespace alias in client proxy.
This has completely resolved my issue.
I have to create a form where I want to send customer id to CRMOD and and should get customer address…customer contacts.
I did but when i click on Run Query button it gives me error:
The SOAP response indicates that an error occurred on the server:
Server
SBL-ODU-01006Internal Error: Session is not available. Aborting.
How to avoid this.How can i pass my Siebel Credentials.How can i see the SOAP request tht MS Infopath is sending????
PLZ HELPy
The error is because you either don't have an active session, or you didn't include the credentials in the soap request header.
I am not sure how you do that in MS Infopath, but this is how SOAPUI adds it.
<soapenv:Envelope xmlns:acc="urn:/crmondemand/xml/account" xmlns:ns="urn:crmondemand/ws/account/10/2004" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Header>
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken wsu:Id="UsernameToken-1" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:Username>USERNAME</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">PASSWORD</wsse:Password>
<wsse:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary">ICC4Ho6oURr/yaJI9uN/+Q==</wsse:Nonce>
<wsu:Created>2013-04-11T22:07:18.772Z</wsu:Created>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
<soapenv:Body>
<ns:AccountWS_AccountQueryPage_Input>
<acc:ListOfAccount>
<acc:Account>
.....
</acc:Account>
</acc:ListOfAccount>
</ns:AccountWS_AccountQueryPage_Input>
</soapenv:Body>
</soapenv:Envelope>
I am pretty new to web services and i've started working on a little project where i need to develope some web-services where i send a request to mysql db to retrieve some records now i've done most it meaning i've been able to generate web services using WSDL through netbeans and connect to database and retrieve records the only problem is soap response is not the format i want it come:
<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
<S:Body>
<ns2:topScorerResponse xmlns:ns2="http://www..co/">
<playersName>John Doe</playersName>
<playersName>John Doe</playersName>
<playersName>John Doe</playersName>
<teamName>Fulham</teamName>
<teamName>Liverpool</teamName>
<teamName>Arsenal</teamName>
<goals>10</goals>
<goals>20</goals>
<goals>11</goals>
</ns2:topScorerResponse>
</S:Body>
</S:Envelope>
but i am looking for something like:
<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
<S:Body>
<S:Body>
<ns2:topScorerResponse xmlns:ns2="http://www..co/">
<playersName>John Doe</playersName>
<teamName>Liverpool</>
<goals>10</>
</ns2:topScorerResponse>
<ns2:topScorerResponse xmlns:ns2="http://www..co/">
<playersName>John Doe</playersName>
<teamName>Fulham</>
<goals>11</goals>
</ns2:topScorerResponse>
</S:Body>
</S:Envelope>
I have a Netbeans SOAP service I can deploy with no issues and a Silverlight client.
When I call the service from Silverlight, I get (in silverlight):
new DiscourseParserWSClient created;
event handler added;
service called; Service State is: Open
http://localhost:8080/DiscourseParserWS/DiscourseParserWSService
An exception occurred during the operation, making the result invalid.
The remote server returned an error: NotFound.
After the client calls the service, GlassFish v3 Domain responds with the following problem I fail to decipher:
WARNING: A required header representing a Message Addressing Property is not present, Problem header:{http://www.w3.org/2005/08/addressing}Action
com.sun.xml.ws.addressing.model.MissingAddressingHeaderException: Missing WS-Addressing header: "{http://www.w3.org/2005/08/addressing}Action"
at com.sun.xml.ws.addressing.WsaTube.checkCardinality(WsaTube.java:235)
at com.sun.xml.ws.addressing.WsaTube.checkMessageAddressingProperties(WsaTube.java:183)
at com.sun.xml.ws.addressing.WsaServerTube.checkMessageAddressingProperties(WsaServerTube.java:281)
at com.sun.xml.ws.addressing.WsaTube.validateInboundHeaders(WsaTube.java:140)
at com.sun.xml.ws.addressing.WsaServerTube.processRequest(WsaServerTube.java:147)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:629)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:588)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:573)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:470)
at com.sun.xml.ws.api.pipe.helper.AbstractTubeImpl.process(AbstractTubeImpl.java:112)
at com.sun.enterprise.security.webservices.CommonServerSecurityPipe.processRequest(CommonServerSecurityPipe.java:195)
at com.sun.enterprise.security.webservices.CommonServerSecurityPipe.process(CommonServerSecurityPipe.java:127)
at com.sun.xml.ws.api.pipe.helper.PipeAdapter.processRequest(PipeAdapter.java:115)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:629)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:588)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:573)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:470)
at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:295)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:515)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:285)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:143)
at org.glassfish.webservices.JAXWSServlet.doPost(JAXWSServlet.java:147)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at org.apache.catalina.core.StandardWrapper.service(StandardWrapper.java:1523)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:279)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:188)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:641)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:97)
at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPipeline.java:85)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:185)
at org.apache.catalina.connector.CoyoteAdapter.doService(CoyoteAdapter.java:332)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:233)
at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:165)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57)
at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:330)
at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:309)
at java.lang.Thread.run(Thread.java:619)
I'm using Metro 2.1 and after quite some googling I suspect the problem might have something to do with it...
I can see the service's wsdl so I believe it can't be an implementation problem. But that warning's stack goes down to the Thread class o.O?
public void run() {
if (target != null) {
target.run(); // <-- to this line to be exact
}
}
Please help shed some light; I already have a couple of eclipse soap services working with this client, but I don't have experience with Netbeans, GlassFish and Metro and can't figure out what's causing this...
Don't know whether or not it is too late, but it helped me sometimes to add the
#Addressing(enabled=true,
required=false)
to the WebService (class annotation). Then the exception usually disappears.
For some more information about the addressing stuff you can refer to 1.
I was receiving the same WARNING and thought this might help someone else.
If you're using the "Reliable Message Delivery" option in Netbeans visual web service designer then you may get this warning.
If you don't require the "Reliable Message Delivery" you can simply turn it off.
I was facing this issue today and the problem was resolved by using the Action attribute on the soap header. I have confirmed this using SoapUI.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:mal="http://example.com">
<soapenv:Header>
<MessageID xmlns="http://www.w3.org/2005/08/addressing">uuid:2c7ea154-668e-4c8b-abaa-8b119f91b8dd</MessageID>
<Action xmlns="http://www.w3.org/2005/08/addressing">http://example.com/input</Action>
</soapenv:Header>
<soapenv:Body>
......
</soapenv:Body>
</soapenv:Envelope>
If we arent passing the Action attribute than we get error message:
<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
<S:Header>
<FaultDetail xmlns="http://www.w3.org/2005/08/addressing">
<ProblemHeaderQName>{http://www.w3.org/2005/08/addressing}Action</ProblemHeaderQName>
</FaultDetail>
</S:Header>
<S:Body>
<SOAP-ENV:Fault xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode xmlns:wsa="http://www.w3.org/2005/08/addressing">wsa:MessageAddressingHeaderRequired</faultcode>
<faultstring>A required header representing a Message Addressing Property is not present</faultstring>
</SOAP-ENV:Fault>
</S:Body>
</S:Envelope>
The value of Action header is determined from #Action on the webmethod.
#Action(input = "http://example.com/input", output = "http://example.com/output")