I am looking to connect my existing PostgreSQL instance on Azure to PG-Admin. Following the advice here, however I get a Unable to connect to server: could not translate host name error. To the best of my knowledge, the host name should be correct. I am taking it from the overview page on Azure, and can confirm it follows the right format of "servername.postgres.database.azure.com". I have also confirmed that that password and usernames are correct, and SSL Mode is set to require (see screenshot, with dummy variables).
In addition, I have tried this on a seperate database in Azure with the same result. No doubt its a mistake I'm making with the hostname/address field in PG-Admin, but I've no idea how to correct.
Prerequisites for connecting PostgreSQL server
Connectivity method: public if we allow for all traffic, private if we restrict traffic via VNet.
Add the IP address where PgAdmin4 is running to the firewall rule.
Step1:
Created a new PostgreSQL server
Step2:
Updated network firewall setting as fallows and saved
Verification from PgAdmin4
Step1:
copy the server's name, user and password from the server setting
Step2:
Open PgAdmin4 portal and click on register server information
On General Tab, enter
- Name: "Any Name"
On Connection Tab:
HostName : "Server Name from the portal"
User Name: "Server admin login name from portal"
Password: "Enter Admin Password"
Database: "Enter DB name else keep same name"
On SSL Tab:
Keep SSL Mode as "Require" and click on SAVE
Upon Save.
NOTE: Make sure firewall should allow and SSL should be Require.
Related
I am not able to connect through pgAdmin4 to Google Cloud SQL.
Following are the credentials I am providing and getting the error messege:
If you are configuring access for public IP connections, follow the next steps to connect with PgAdmin:
1) Create your PostgreSQL instance in Google Cloud Platform.
2) While creating the instance,
In Instance ID tab, write a name for your instance
In Default user password tab, write a password.
Choose the region.
Click on configuration options, go to Connectivity, enable Public IP, under Authorized networks, add network and their write the IP address of your PC. You can check the IP address in the link .
Click on create.
Then in PgAdmin:
1) In Host name/address put Public IP address of the instance.
To connect with Google Cloud SQL using pgadmin client, you can use cloud_sql_proxy
These steps need to follow:
Establish connection to Postgres.
cloud_sql_proxy -instances=<connection string>=tcp:5433
You will get connection string from GCP here
After executing cloud_sql_proxy, you will see something like this
Now create a new server connection using pgadmin client.
If you followed those steps properly it will connect and can use like local pgadmin.
Nibrass H has perfectly answered this question.
But I would like to add that if you have already created the Instance, then you can click on 'Edit Instance' and Add your IP in 'Connections'.
Adding some Images to help you.
I need to use MySQL to send queries to a Google Cloud SQL database set up. I already have an instance created and a user, and I am able to access the database through the Cloud Shell. I can't seem to find the credentials to log into the database (host name, username, password, port and socket), and I'm not sure how to access them through the shell.
You can find the available methods to connect to your Cloud SQL instance here.
Connecting from an IP address without SSL is probably the easiest one:
In the Cloud Console, go to the cloud SQL instances screen and click on your instance’s name.
In the overview tab, take note of the Primary IP Address, you’ll use it instead of a hostname.
In the users tab, you can create a new user or reset the password of an existente one, including the root user.
In the authorization tab, add the ip or ip range where you are attempting the connection from, so Cloud SQL accept connections from your client (more on this here).
Start your mysql client as follows (note the port is not necessary as the default one is used):
mysql --host=[INSTANCE_IP_ADDR] --user=[USER_NAME] --password
I can't seem to connect to Cloud SQL with Workbench. I keep getting this error.
Failed to Connect to MySQL at CLOUD-SQL-IPv4:3306 with user root
Access denied for use 'root'#'WHITE-LISTED-IP-ADDRESS' (using password: YES)
I have white listed my IP.
I have set an IP for the SQL instance.
I have checked the username and Password several times.
Any idea why this is happening?
It seems you have to create a new user in the Google Cloud Console with the host name set to %(any host). You can't seem to connect using the root user.
Is it possible to connect with the #root user but after you finish the setup you have to restart the sql server.
What is important to set up an SSL certificate if you connect to you production database, but if you only try it out you can allow unsecured connection. Another important thing is to add your IP to the Authorised Networks in the Connection tab.
After installing the standard Tryton packages in Ubuntu 12.04, I can start the client and create a new database. But the client refuses to connect to the database. It will display the locally created databases, but will fail to add the localhost profile.
If I try to add a new profile, the client will show the installed databases, but on clicking ok will fail silently back to the start screen, without adding the new profile.
New profile setting was:
Hostname: localhost
Port: 8000
Database: [Correctly displays the list of created Dbs]
Username: [I've tried everything from tryton, admin, test to root]
I have also tried to connect directly in the Tryton client without adding a new profile, then it will always yield "Bad user or password", no matter how exact I re-enter the tryton user with his password, or any other user (admin, root) for that matter.
I have followed the procedure in the documentation (Readme.debian: adding database user in /etc/trytond.conf and so forth, have registered tryton user with postgres and in trytond.conf).
Do I need to be logged in as tryton on Remote Desktop maybe?
The client was started on the Ubuntu desktop via Remote Desktop, logged in as root.
Tried to log in as tryton, too. That will get to the desktop, but somehow not show the Terminal window. Hence I can't start the Tryton client. Terminal will blink for a second and then vanish.
When you create a dabatase from the tryton client it ask you the admin password. You must enter with the 'admin' username and with the admin password you used on the database creation step.
Once you enter the system you will see and step to create additional User. You can skip it if you want, as they can be created at any time from Administration -> Users -> Users menú.
You must never use the passwords entered on etc/trytond.conf as this credentials are used from the tryton server to conect to the database. User logins are managed by tryton server.
I have a MySql database that is running on a linux server. The DB is not password encrypted.
I understand that no password != empty password.
I installed mysql workbenck on my windows laptop and am trying to connect to my database. It doesn't allow me to.
Details:
Connection method: Standard (TCP/IP)
Error: Cannot connect to Database server
Your connection attempt failed for user'root' from your host to server at 3306
Host is not allowed to connect to this MySql Server.
I am supposing it might be a windows firewall issue.
Please can somebody help me resolve this.
The error message says it clearly: the machine you are connecting from is not allowed to connect. In a MySQL server you can create users with specific IPs they can connect from. Often only localhost access is enabled (user#localhost or user#127.0.0.1 or user#::1), sometimes anyhost (user#%). In order to connect from your Windows machine your user must either be allowed to connect from any host or you need a specific user for the IP address of your Win machine.
The error because the mysql server is not starting in your computer.so you can start it manually..do the following steps,
1.download and install wamp server according to your bit version(32bit or 64bit) in your computer(http://wampserver-64bit.en.softonic.com/) this link allows you to download wamp server for 64bit.
2.As soon as you install it you can double click and run it..(you can see a icon in the right hand of the taskbar.It may be hide.so you can click the arrow which dhows you the hide apps runing).So click the icon and go to Mysql
3.Then go to Service and there you can find Start/Resume Services click on it..
4.And now it is done.Open mysql workbench and see.It will work..
You should create an specific user for accesing from your laptop:
CREATE USER 'youruser'#'machine.domain.com' IDENTIFIED BY 'your-password';
GRANT ALL PRIVILEGES ON *.* TO 'youruser'#'machine.domain.com' WITH GRANT OPTION;
Or you could create an user for accesing from anywhere
CREATE USER 'new_user'#'%' IDENTIFIED BY 'my-password';
GRANT ALL PRIVILEGES ON *.* TO 'new_user'#'%' WITH GRANT OPTION;