I've setup the WAL archiving already and when I'm running the following query,
SELECT * FROM pg_stat archiver; The system gives me back this:
Archived count 0, last_archived_wal (empty), last_archived_time (empty), failed_count, 40 (keep growing), last_failed_wal (lot of numbers, always same), and the fail time and stat reset.
The log file:
2023-01-13 00:01:37.846 JST [5456] LOG: archive command failed with exit code 1 2023-01-13 00:01:37.846 JST [5456] DETAIL: The failed archive command was: copy "pg_wal\000000010000002300000063" "C:\server\archivedir\000000010000002300000063" 2023-01-13 00:01:37.848 JST [5456] WARNING: archiving write-ahead log file "000000010000002300000063" failed too many times, will try again later The system cannot find the path specified.
The psql create the files, 16 MB each and also create the .ready files. Bit when I like to check the status ( SELECT * FROM pg_stat_archiver; )
Related
I have a file that keeps failing to archive.
The failed archive command was: test ! -f /mnt/wal_archive/archivedir/00000001000003F000000072 && cp pg_wal/00000001000003F000000072 /mnt/wal_archive/archivedir/00000001000003F000000072
As instructed in other questions, I already manually deleted the file manually on the archivedir, and the file was copied again automatically, once that occurs, I start seeing the fail command again.
At the moment the file is in the pg_wal and in the archivedir. Once the file is in the archivedir shouldn't it be removed from from the pg_wal?
I'm a bit lost and out of ideas, any help would be appreciated. thanks
UPDATE:
This is all I get from the logs
DETAIL: The failed archive command was: test ! -f /mnt/wal_archive/archivedir/00000001000003F000000072 && cp pg_wal/00000001000003F000000072 /mnt/wal_archive/archivedir/00000001000003F000000072
Error
2022-05-12 09:54:29.207 CEST2022-05-12 07:54:29.206 UTC [18] LOG: archive command failed with exit code 1
Error
2022-05-12 09:54:29.207 CEST2022-05-12 07:54:29.206 UTC [18] DETAIL: The failed archive command was: test ! -f /mnt/wal_archive/archivedir/00000001000003F000000072 && cp pg_wal/00000001000003F000000072 /mnt/wal_archive/archivedir/00000001000003F000000072
Error
2022-05-12 09:54:29.207 CEST2022-05-12 07:54:29.207 UTC [18] WARNING: archiving write-ahead log file "00000001000003F000000072" failed too many times, will try again later
2nd Update:
Furthermore the wal_keep_segments and the max_wal_size settings are being ignored.
WAL files are not archiving to archive location, even space is available on mount point.
Please find below errors.
cp: write error: No space left on device
2021-11-29 11:27:08.672 UTC [3725060] LOG: archive command failed with exit code 1
2021-11-29 11:27:08.672 UTC [3725060] DETAIL: The failed archive command was: cp pg_wal/000000010000096B00000011 /home/ericsson/Backup/postgresql/pgbackup/wals/000000010000096B00000011
Please can any one provide the solution for this issue..
Could someone please give me advice to make an openbmc image for Raspberrypi platform ?
Before I tried, I looked through related documents and believed an openbmc image can be worked on Raspberrypi.
Like OpenBMC with Raspberry Pi (2 or 3) and build bmcweb?
and https://kevinleeblog.github.io/project1/2019/11/25/openbmc-for-raspberry-pi-zero/.
So, I followed these instructions and tried the following steps.
#1: Git clone openbmc.git to my local PC.
tm#tm-VB1:~/Rpi4-64$ git clone https://github.com/openbmc/openbmc.git
Snip the logs but it looks no problem.
Receiving objects: 100% (182121/182121), 84.10 MiB | 5.55 MiB/s, done.
Resolving deltas: 100% (96860/96860), done.
#2: set TEMPLATECONF for raspberrypi
tm#tm-VB1:~/Rpi4-64$ export TEMPLATECONF=meta-evb/meta-evb-raspberrypi/conf
tm#tm-VB1:~/Rpi4-64$ echo $TEMPLATECONF
meta-evb/meta-evb-raspberrypi/conf
#3: set up the environment by "openbmc-env"
tm#tm-VB1:~/Rpi4-64/openbmc$ . openbmc-env
### Initializing OE build env ###
Snip the logs but it looks no problem. As you know, the script automatically creates a subdirectory,build, under openbmc.
Common targets are:
obmc-phosphor-image
tm#tm-VB1:~/Rpi4-64/openbmc/build$
#4: Change the directory and edit local.conf for my Raspberrypi platform.
tm#tm-VB1:~/Rpi4-64/openbmc/build$ cat ./conf/local.conf
Snip the log for unchanged part.
MACHINE ??= "raspberrypi4-64" <<< Change here for my platform.
DL_DIR ?= "/home/tm/Yocto/downloads" <<< Add here for build-time reduction at retry.
SSTATE_DIR ?= "/home/tm/Yocto/sstate-cache" <<< Add here for build-time reduction at retry.
#5: Change FLASH_SIZE variable based on the following sugestion. https://github.com/openbmc/openbmc/issues/3590
tm#tm-VB1:~/Rpi4-64/openbmc/meta-phosphor/classes$ cat image_types_phosphor.bbclass
Snip the log.
# Flash characteristics in KB unless otherwise noted
FLASH_SIZE ?= "131072" <<< I changed only this variable from 32768 to 131072.
#6: bitbake starts.
tm#tm-VB1:~/Rpi4-64/openbmc/bitbake obmc-phosphor-image
Then, ERROR happened.
ERROR: Logfile of failure stored in: /home/tm/Rpi/openbmc/build/tmp/work/raspberrypi-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/temp/log.do_generate_static.2055074
DEBUG: Executing python function do_generate_static
DEBUG: Executing shell function do_mk_static_nor_image
32768+0 records in
32768+0 records out
33554432 bytes (34 MB, 32 MiB) copied, 0.09147 s, 367 MB/s
DEBUG: Shell function do_mk_static_nor_image finished
DEBUG: Considering file size=495980 name=/home/tm/Rpi/openbmc/build/tmp/deploy/images/raspberrypi/u-boot.bin
DEBUG: Spanning start=0K end=512K
DEBUG: Compare needed=495980 available=524288 margin=28308
484+1 records in
484+1 records out
495980 bytes (496 kB, 484 KiB) copied, 0.00120141 s, 413 MB/s
DEBUG: Considering file size=8266960 name=/home/tm/Rpi/openbmc/build/tmp/deploy/images/raspberrypi/fitImage-obmc-phosphor-initramfs-raspberrypi-raspberrypi
DEBUG: Spanning start=512K end=4864K
>>>DEBUG: Compare needed=8266960 available=4456448 margin=-3810512
ERROR: Image '/home/tm/Rpi/openbmc/build/tmp/deploy/images/raspberrypi/fitImage-obmc-phosphor-initramfs-raspberrypi-raspberrypi' is too large!
DEBUG: Python function do_generate_static finished
It said margin=-3810512.
Now, my 2nd try.
I removed the whole openbmc directory and did the same steps above.
But this time, I change FLASH_SIZE from 32768 to 262144.
It is the same result like below.
ERROR: obmc-phosphor-image-1.0-r0 do_generate_static: Image '/home/tm/Rpi4/openbmc/build/tmp/deploy/images/raspberrypi4/u-boot.bin' is too large!
ERROR: Logfile of failure stored in: /home/tm/Rpi4/openbmc/build/tmp/work/raspberrypi4-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/temp/log.do_generate_static.2061792
ERROR: Task (/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static) failed with exit code '1'
NOTE: Tasks Summary: Attempted 3915 tasks of which 2633 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static
Summary: There were 2 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
tm#tm-VB1:~/Rpi4/openbmc/build$ cat /home/tm/Rpi4/openbmc/build/tmp/work/raspberrypi4-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/temp/log.do_generate_static.2061792
DEBUG: Executing python function do_generate_static
DEBUG: Executing shell function do_mk_static_nor_image
32768+0 records in
32768+0 records out
33554432 bytes (34 MB, 32 MiB) copied, 0.177223 s, 189 MB/s
DEBUG: Shell function do_mk_static_nor_image finished
DEBUG: Considering file size=548224 name=/home/tm/Rpi4/openbmc/build/tmp/deploy/images/raspberrypi4/u-boot.bin
DEBUG: Spanning start=0K end=512K
>>>DEBUG: Compare needed=548224 available=524288 margin=-23936
ERROR: Image '/home/tm/Rpi4/openbmc/build/tmp/deploy/images/raspberrypi4/u-boot.bin' is too large!
DEBUG: Python function do_generate_static finished
tm#tm-VB1:~/Rpi4/openbmc/build$
It said margin=-23936.
OK. Image is too large. So,my 3rd try.
I removed the whole openbmc directory and did the same steps above.
But this time, I change FLASH_SIZE from 32768 to 9437184.
It is the same result like below.
ERROR: obmc-phosphor-image-1.0-r0 do_generate_static: Image '/home/tm/Rpi4/openbmc/build/tmp/deploy/images/raspberrypi4/u-boot.bin' is too large!
ERROR: Logfile of failure stored in: /home/tm/Rpi4/openbmc/build/tmp/work/raspberrypi4-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/temp/log.do_generate_static.2058361
ERROR: Task (/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static) failed with exit code '1'
NOTE: Tasks Summary: Attempted 3935 tasks of which 0 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static
Summary: There were 4 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
tm#tm-VB1:~/Rpi4/openbmc$
tm#tm-VB1:~/Rpi4/openbmc$ cat /home/tm/Rpi4/openbmc/build/tmp/work/raspberrypi4-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/temp/log.do_generate_static.2058361
DEBUG: Executing python function do_generate_static
DEBUG: Executing shell function do_mk_static_nor_image
32768+0 records in
32768+0 records out
33554432 bytes (34 MB, 32 MiB) copied, 0.173685 s, 193 MB/s
DEBUG: Shell function do_mk_static_nor_image finished
DEBUG: Considering file size=548224 name=/home/tm/Rpi4/openbmc/build/tmp/deploy/images/raspberrypi4/u-boot.bin
DEBUG: Spanning start=0K end=512K
>>>DEBUG: Compare needed=548224 available=524288 margin=-23936
ERROR: Image '/home/tm/Rpi4/openbmc/build/tmp/deploy/images/raspberrypi4/u-boot.bin' is too large!
DEBUG: Python function do_generate_static finished
tm#tm-VB1:~/Rpi4/openbmc$
It said the same margin as 256MB case.
My 4th try.
I removed the whole openbmc directory and did the same steps above.
I changed MACHINE ??= "raspberrypi4-64" to "raspberrypi2"
But this time, I change FLASH_SIZE from 32768 to 33554432.
It is the same result before.
My 5th try.
I removed the whole openbmc directory and did the same steps above.
I used MACHINE ??= "raspberrypi2"
But this time, I change FLASH_SIZE from 32768 to 67108864.
It is the same result before.
After I tried several variations, it always said "image is too large" although I changed FLASH_SIZE to much much larger one.
So, I am wondering if I have missed some important configuration or it needs another parameter to fix this except FLASH_SIZE.
By the way, I tried romulus and made it.
My environment is ubuntu-20.04.2.0-desktop-amd64.
I really appreciate someone could kindly give me advice to make this work.
Interesting, I don't have a quick fix for you but I did notice the partition that is over sized is the uboot partition. The uboot is a smaller separate binary installed on the machine. It looks as if your uboot build is over 512k and the partition is set for 512k. Your flash size is massize
FLASH_SIZE = 9437184" that is more then a gig, (because FLASH_SIZE is in K)
If I were you I would first try to build an older version of openbmc for raspberry pi. (It used to work so you just need to find the commit before uboot grew to big). Use git to move back a month until you find it works.
If that does not work I would try to modify the partition table.
here is where you failing
this looks fine building the uboot image looks fine
increasing the kernel offset make if build, but the other targets in openbmc will not be happy with this solution. So maybe meta-raspberry-pi will have to override the partition table (if uboot can not be shrunk)
What ever you do, open an issue on the github and share you changes. Also use the discord, and gerrit.
I just replicated this issue. We should fix it
This is the first time I have every used make. I am trying to install the Julia language. So I cloned from GitHub
git clone git://github.com/JuliaLang/julia.git
The instructions then say enter in the Julia directory and type make. It ran for a very long time - I ate a pizza.
When I got back, typing Julia did not work. Towards the end of the installation, I got a long error message:
/usr/bin/install -c -m 644 libpcre.pc libpcreposix.pc libpcrecpp.pc '/home/john/Downloads/julia/usr/lib/pkgconfig'
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 130 100 130 0 0 243 0 --:--:-- --:--:-- --:--:-- 337
0 0 0 8773k 0 0 310k 0 --:--:-- 0:00:28 --:--:-- 0
curl: (28) Operation too slow. Less than 1 bytes/sec transferred the last 15 seconds
curl: (6) name lookup timed out
make[2]: *** [openblas-v0.2.8.tar.gz] Error 6
make[1]: *** [julia-release] Error 2
make: *** [release] Error 2
I tried sudo make - putting sudo in front seems to solve everything but not this:
gzip: stdin: unexpected end of file
tar: Unexpected EOF in archive
tar: Unexpected EOF in archive
tar: Error is not recoverable: exiting now
make[2]: *** [openblas-v0.2.8/config.status] Error 2
make[1]: *** [julia-release] Error 2
make: *** [release] Error 2
What steps can I take to makes sure Julia installs properly?
I need version 2.0 so I can use iJulia with my iPython notebook. If there is an easier way without compiling directly, I would just do that.
The problem is that the makefile is trying to download a file (curl is a command line program that acts like a web browser, and is often used to download files from websites).
However, for whatever reason (maybe the internet was tired) the download failed and timed out.
The reason it fails now with the unexpected end of file error is that (a) the download gave you part of a file before it failed, and (b) the makefile you're using is badly written so it didn't clean up the partly-downloaded file on failure.
So, that file exists and thus make won't try to download it, but it's only partial so when you try to uncompress it, it fails.
You should delete the file it tried to download by hand (with something like rm -f openblas-v0.2.8.tar.gz) then re-run make. Maybe the internet has woken up, or drunk some coffee, and the download will work this time.
Every build has failed as of Tuesday. I'm not exactly sure what happened. The Phing targets (clean/prepare) are being executed properly. Additionally, the unit tests are passing with flying colors, with only a warning for duplicate code (not a reason for a fail). I tried removing the phpDoc target to see if that was causing the error, but the build still failed.
Started by user chris Updating
file://localhost/projects/svn/ips-com/trunk
At revision 234 no change for
file://localhost/projects/svn/ips-com/trunk
since the previous build [trunk] $
/opt/phing/bin/phing clean prepare
-logger phing.listener.NoBannerLogger Buildfile:
/var/lib/hudson/.hudson/jobs/IPS/workspace/trunk/build.xml
IPS > clean:
[echo] Clean... [delete] Deleting directory
/var/lib/hudson/.hudson/jobs/IPS/workspace/build
IPS > prepare:
[echo] Prepare...
[mkdir] Created dir: /var/lib/hudson/.hudson/jobs/IPS/workspace/build
[mkdir] Created dir: /var/lib/hudson/.hudson/jobs/IPS/workspace/build/logs
[mkdir] Created dir: /var/lib/hudson/.hudson/jobs/IPS/workspace/build/logs/coverage
[mkdir] Created dir: /var/lib/hudson/.hudson/jobs/IPS/workspace/build/logs/coverage-html
[mkdir] Created dir: /var/lib/hudson/.hudson/jobs/IPS/workspace/build/docs
[mkdir] Created dir: /var/lib/hudson/.hudson/jobs/IPS/workspace/build/app
BUILD FINISHED
Total time: 1.0244 second
[workspace] $ /bin/bash -xe
/tmp/hudson3259012225710915845.sh
+ cd trunk/tests
+ /usr/local/bin/phpunit --verbose -d memory_limit=512M --log-junit
../../build/logs/phpunit.xml
--coverage-clover ../../build/logs/coverage/clover.xml
--coverage-html ../../build/logs/coverage-html/
PHPUnit 3.5.0 by Sebastian Bergmann.
IPS Default_IndexControllerTest .
Default_AuthControllerTest ......
Manage_UsersControllerTest .....
testDeleteInvalidUserId ..
testGetPermissionsForInvalidUserId .. Audit_OverviewControllerTest
............
Time: 14 seconds, Memory: 61.00Mb
[30;42m[2KOK (28 tests, 198
assertions) [0m[2K Writing code
coverage data to XML file, this may
take a moment.
Generating code coverage report, this
may take a moment.
Warning: Unknown: Error occured while
closing statement in Unknown on line 0
Warning: Unknown: Error occured while
closing statement in Unknown on line 0
Warning: Unknown: Error occured while
closing statement in Unknown on line 0
Warning: Unknown: Error occured while
closing statement in Unknown on line 0
Warning: Unknown: Error occured while
closing statement in Unknown on line 0
Warning: Unknown: Error occured while
closing statement in Unknown on line 0
Warning: Unknown: Error occured while
closing statement in Unknown on line 0
Warning: Unknown: Error occured while
closing statement in Unknown on line 0
[workspace] $ /bin/bash -xe
/tmp/hudson1439023061736436000.sh
+ /usr/local/bin/phpcpd --log-pmd ./build/logs/cpd.xml ./trunk phpcpd
1.3.2 by Sebastian Bergmann.
Found 1 exact clones with 6 duplicated
lines in 2 files:
library/Ips/Form/Decorator/SplitInput.php:8-14
library/Ips/Form/Decorator/FeetInches.php:10-16
0.04% duplicated lines out of 16585 total lines of code.
Time: 4 seconds, Memory: 19.50Mb [DRY]
Skipping publisher since build result
is FAILURE Publishing Javadoc [xUnit]
[INFO] - Starting to record. [xUnit]
[WARNING] - Can't create the path
/var/lib/hudson/.hudson/jobs/IPS/workspace/generatedJUnitFiles.
Maybe the directory already exists.
[xUnit] [INFO] - Processing
PHPUnit-3.4 (default) [xUnit] [INFO] -
[PHPUnit-3.4 (default)] - 1 test
report file(s) were found with the
pattern 'build/logs/phpunit.xml'
relative to
'/var/lib/hudson/.hudson/jobs/IPS/workspace'
for the testing framework 'PHPUnit-3.4
(default)'. [xUnit] [INFO] -
Converting
'/var/lib/hudson/.hudson/jobs/IPS/workspace/build/logs/phpunit.xml'
. [xUnit] [INFO] - Stopping recording.
Publishing Clover coverage report...
Publishing Clover XML report...
Publishing Clover coverage results...
Finished: FAILURE
What changed since Tuesday? Try to manually run exactly the same commands that Hudson tries to run from the same directory that Hudson starts it from (usually the jobs workspace directory). Of course with the user account that Hudson is started under.
There are several possibilities. ranging from standard groups for a directory, to permission, or other things outside of Hudson. Was Hudson upgraded? Was a plugin upgraded? Was the OS or php upgraded? Was there a change in the default or user .profile or .env (or the equivalent files)? Does another process accesses the workspace? ......
Once I had the problem that all of the sudden my deployment scripts did not run anymore. The mystery was, that I could still run the script from command line with the Hudson user account. The reason was simple but took a while to uncover. There was a java upgrade from 5 to 6. Both versions were available. After comparing the environment variables, there was a difference in the path. The problem was that the new path was set in the global .profile. But Hudson does not open an interactive shell, therefore the .profile will not be executed. If you have a problem like this, you can put the initialization in the .env file (or whatever the filename is for your system), because this will be run regardless if it is a interactive shell or not. Alternatively you can configure Hudson to set it on master or node/slave level.
if you want a command to not break the 'build' as a failure you have to add #! in front of the command to prevent the flags -xe which produce this behaviour.