If I name the folder "templates" or "template", the files in the folder don't apply colors or suggest in VisualStudio Code.
1st image shows when I named the folder "templates", and 2nd one shows when I named the folder "foo" (flutter).
I'm not sure but this happens maybe because of a extension that I added?
Please tell me how can I avoid this.
This is my setting of files.associations:
As indicated by the asker in the comments, the issue is due to file associations. Check your settings.json file to see if you have anything set in the "files.associations" setting that could be causing this. Otherwise, try disabling extensions that aren't needed to see if they are related to the issue. You can also change what file association is being used by clicking the lanugage indicator on the bottom right of the screen that has a "Select Language Mode" hover message. The same action can be done by using the command palette and using the "Change Language Mode" command.
Related
My current workspace shows this directory. I would like to remove it so it doesn't appear in my workspace.
According to the documentation that I've read the way to do this is to go to File->Preferenceces -> Workspace Tab and the Add a pattern in the excludes.
However, no pattern that I've tried has worked.
I've tried
**/IVAPI/BKP_OLD_CODE/*
**/BKP_OLD_CODE/*
**/*BKP_OLD_CODE*
**/BKP_OLD_CODE
Then I click the refresh button on the worksapce explorer but the directory stills shows up. How can I add a patter so that BKP_OLD_CODE does not show up anymore?
You were very close, the fact is that, since its a folder, it does not have an extension or prefix! So just use the name of the folder (BKP_OLD_CODE in this case) and you are all done!
I've just started using Vscode and have a created a WebAPI project. On trying to open any of the default code files (Startup.cs and Program.cs) whatever I type starts to appear in the blue bar as shown below instead of where I have placed the cursor. I have no idea what's going on or what that blue bar is.
I am able to add my own code files and edit these as I would expect.
I'm running Vscode 1.29.1 on Win 10 on a Dell Latitude 12 7275. The vscode extension
Enabled extensions :
That's caused by Vim extension. Uninstall or disable it, otherwise use insert key on your keyboard to put it in insert mode.
I'l leave this here for future readers
Basically, if I split files in tabs in VS Code, I could work with the files on the left hand side but could "read-only" all the files on the right hand side.
When I went to the extensions tabs I noticed that whatever I typed was being typed in the field in the extensions search bar. After deleting that, and clicking back on the "Files" tab, it went back to normal and can basically edit files on the both sides of my split screen.
If cannot type
Check where whatever you type is going (e.g. Extensions > Search bar)
Delete wherever it's being typed, and click back on the "Files tab"
Check if it works
I had to change the parent folders permission...
Try changing the entire folder to:
Read & Write: Allows a user to open the item and change it.
https://support.apple.com/guide/mac-help/change-permissions-for-files-folders-or-disks-mchlp1203/mac
Is it possible to show the last folder in the title bar? If you have multiple instances of VS Code open, it is difficult to distinguish between them from the task bar. If both instances are open on say a file called 'main.ts', you will see 'main.ts' in the taskbar item.
Currently, the title would be [filename open] - [folder open] (e.g main.ts - angular2-training. Is it possible to invert them to become [folder open] - [filename open] (e.g angular2-training - main.ts?
Use window.title in user/workspace settings
The documentation is here with the full list of options of what can be shown. It's quite flexible.
In your case, to display angular2-training - main.ts you can use this
{
"window.title": "${rootName}${separator}${activeEditorShort}"
}
Older VS Code versions
The above only works in v1.10 and up. Here's how to do it in older versions:
v1.9, v1.8 - "window.showFullPath": true shows the full path to the current file, so you can at least see the project folder. Note this config is unsupported after v1.10
v1.7 and below - it's not possible
On version 1.13
Go to settings, inside UserSettings add this line to the json blob:
"window.title": "${activeEditorLong}"
On version 1.41.1
based uploaded image:
1,2: Go to Setting
3: Search windows title in search box
4: Type this statement in windows title box:
${dirty}${separator}${rootName}${separator}${activeEditorShort}
If you want to be able to identify which project you are working on by looking at the window title bar, one option is to set "window.title" to a custom value in the workspace settings file at
/.vscode/settings.json
If the file doesn't exist, create it, then add the following to it:
{
"window.title": "<PROJECT NAME> : ${rootName}${separator}${activeEditorShort}"
}
This is a simple solution that works rather well.
Tested in 1.44
The setting which matches the OPs problem... not being able to tell which VS Code editor is which from the taskbar... is:
"window.title": "${folderName} ${separator} ${activeEditorShort}"
I prefer the simpler
"window.title": "${folderName}"
${activeFolderShort} and friends, don't do what I want, as these follow the folder the active file is in. Whereas I want the folder of the whole "project" shown at all times.
Also, when browsing from the taskbar, I don't care what file is active - it is just noise. I care about the project (i.e. folder). On many occasions, every open VS Code will "main.rs" as the active file, so it is pointless to show it!
Editing the settings in json format even includes intellisense now, so you can see all the options without even having to look them up, and they appear as soon you save the settings file. No need to reload. Awesome!
v1.31 of vscode added these options to window.title:
There are three new variables that can be used within the window.title
setting:
${activeFolderShort}: The name of the folder the file is contained in.
${activeFolderMedium}: The path of the folder the file is contained
in, relative to the workspace folder.
${activeFolderLong}: The full
path of the folder the file is contained in.
In addition of the setting:
"window.title": "${rootName}${separator}${activeEditorShort}"
You now can configure the separator as well with VSCode 1.45 (April 2020)
Allow customize the window title separator
A new setting window.titleSeparator allows to change the separator that is used in the window title.
By default a dash is used.
Just some tweaks i found out:
// will not work on workspace settings.json -> only global
"window.titleBarStyle": "custom",
// show only the name of the workspace folder in the title bar
"window.title": "${folderName}",
// remove the useless icons on the top-right
"window.commandCenter": false,
// make left & top green :-)
"workbench.colorCustomizations": {
"activityBar.background": "#1e2127",
"activityBar.foreground": "#95C085",
"titleBar.activeBackground": "#165900",
"titleBar.activeForeground": "#ffffff",
},
I need help with Xcode 6.
It only happens with the project I'm working with. For the other one, code suggestion works.
What's wrong with my project?
The answer was to delete ~/Library/Developer/Xcode/DerivedData/ModuleCache (while Xcode is closed)
I have been researching the same issue on StackOverflow and here are what most threads suggest: delete Derived Data folder files (or maybe just the files relevant to your troublesome project!). It worked for me hence this answer. Details below:
Fix manually by deleting all the files in ~/Library/Developer/Xcode/DerivedData
Note: If Library folder is new to you, follow this CultOfMac article:
Library access on.
Open a Finder window and then navigate to the Home folder. That’s the one represented by the cute little house icon over in the sidebar. If you don’t see it, click on something like the Desktop or Documents folder, and then Command-click on the title bar of the window. You’ll get a drop-down menu that shows the file path of the current folder, which–if you’ve picked a folder from your Home directory–will show the Home folder somewhere in the list. Click on it to go to the Home folder.
Now, once you’re there, hit Command-J to bring up the View Options panel. You’ll see a checkbox to “Show Library Folder” somewhere in that panel, depending on the view your Finder window is in. Simply check it to show your User account’s Library folder. Now you can go in there and mess around to your heart’s content.
Note: Some StackOverflow members suggested pressing 'Escape' key or Command and + keys after the dot (.), others suggested typing a white space (control+space bar). However, your post seems to suggest it's project-specific (works for the other project) so it may prove useful to try different approaches. Hope this helps.
Swift files will NOT have code completion for UI classes (e.g. UIImage, UIDevice) unless there is an "import UIKit" at the top of the file.
I have the same set of files in N folders, one of them, say, blank.xhtml. The files contain somewhat similar information and it is becoming overwhelming to figure out which file comes from which folder every time I switch between the tabs. When I open one of them to edit and happen to open a file with the same name from another folder I get confused and more often than not end up editing the wrong file: nullifying my hard work. So I am wondering if there is a way to show the name of a containing folder in the tab like this G-06/blank.xhtml or G-07/blank.xhtml. I will be very very thankful to anybody who has pointers to how I can make this happen.
As an addition to the Maroun's answer there is an alternative solution.
It's not exactly what you want (full name in the tab's title), but may be useful sometimes.
In the "Project Explore" view (the same goes to "Navigator" view) click the "Link with Editor" button. That way, whenever you choose some file opened in the editor, it will be automatically selected/highlighted (see the picture) in the "Project Explorer" view.
Here is the picture:
Maybe this will be useful to you too.
If you hover the mouse over the tab containing the file name then a popup appears showing the full path. Not exactly what you wanted, but it should help. (This with Eclipse Neon.3 Release 4.6.3 on a Mac).
Not quite what you're looking for, but ctrl+shft+e will open the switch editor window that shows all the open editors with their filepaths. I use this shortcut for the same reason. I'll have multiple build.gradle files open from multiple projects and this helps pick the correct one