For Eclipse/STS4 IDE assume exists a window where in some section exists the following views together and sorted as:
Console
Javadoc
Progress
Search
Terminal
Now, if is need to move or change the position of the Search view as the second (after of the Console view), how to accomplish this goal with the keyboard and not with the mouse? therefore without drag and drop.
Reason
Accident about a cut-off in a hand's palm, so is not easy use the palm of the hand to use the mouse
Related
When I compare two versions of a source file (for example, from egit) in the Eclipse IDE, the Compare View is appeared. It has two panes containing two versions of a text and I can use keyboard to move cursor through the text on one of this panes (or even edit the text in it). Additionally, I can use special shortcuts to go to the next/previous difference and/or apply current change from/to the opposite pane. But, I didn't find a way to move the input focus to other pane.
Actually, I would like be able to do this in one case. Let's say, I compare two revisions of a source and I need to apply some changes while others are unneeded. To achieve this, I walk through changes using the Ctrl + , or . shortcuts and apply needed changes using, for example, the Ctrl + Shift + ,. It looks like all is OK, but if I reach a change which has no any text in the current pane, the applying shortcut does not work. For example, the cursor is on the left pane. I went to the next difference and this difference is concluded in that the text was, for example, added in this line. So, the Compare View will show this added text on the right pane, will highlight it with the special rectangle while this rectangle on the left pane will have zero height and the cursor will be placed under this zero-sized rectangle. I.e., outside of it. So, I think, exactly this thing causes that the current change applying does not work. When I click on the opposite pane, inside of this change and then use the change applying shortcut, it works fine. So, I would like to switch to other plane via shortcut, not using mouse.
This is driving me mad! I love the new layout options in Word 2013, but when a callout gets to a certain size the icon for it obscures the end of the arrow, and you can't move the arrow:
Don't suppose anyone knows either how to get rid of the icon, how to click and drag on the yellow end of the arrow, or how to stop the icon appearing in the first place?
Thanks in advance.
Here are two answers that helped me. The second option gets rid of the floating Layout Options button, but at the cost of disabling some features of Word 2013.
First Option:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/any-way-to-disable-the-layout-options-button/47f6af4a-2acd-483e-a953-6415c8530554
It might help to increase the zoom (use the slider at the right end of the status bar) while you work with the picture.
Second Option:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/layout-options-icon-word-2013-suddenly-missing/ce304589-9db2-44c5-b1e1-8fd6596b70c4
Is the document in Compatibility Mode (shown by those words appearing in the title bar along with the document name)? If that's the case, click File and then click the Convert button. That will make the Layout Options button appear when a picture is selected, as well as turning on other features that are available only in the 2013 format. When you save, the document file will change to the .docx extension.
I know the second quote is about turning the Layout Options button on, but it works backwards, too. I saved my file as a *.doc instead of a *.docx and the floating button went away.
When you're finished editing your callouts, you can save it again as a *.docx.
One method that helped me was to flip horizontal, change the leader position, then flip back. That way the leader line is temporarily on the opposite side of the layout button, and both handles of the leader line are accessible, then can flip back. It is an extra step, but is another alternative.
In an attempt to automate this to quickly flip the object back and forth, I couldn't find a macro command to make a shortcut, or anything under Customize Ribbon with custom Keyboard Shortcuts to Flip Horizontal (MoreRotationOption opens up a dialog which does not give an option to flip).
The Flip Horizontal command could be called by pressing ALT JD (Format) AY (Rotate Objects) H (Horizontal) when the object is selected...
The best I could do was to add Rotate Objects to the Quick Access Toolbar, then the Flip Horizontal command could be called by pressing ALT # (whatever number you assign) H (Horizontal) which is three keystrokes.
I'm trying to split my windows so I can have 2 different classes or whatever on 1 screen but it will only split the window of the same class/file/whatever. I've been using netbeans for years and still can't do this.
Is this possible?
You don't specifically mention which version of NetBeans you are using. I'm using version 8, and these instructions work for that version and version 7. I believe it is the same for version 6.
If you want to see two different source files on the screen at the same time (without floating), then open both source files. You will have two tabs in the editing area of the IDE. Click on the tab of one of the source files without releasing the mouse button (and without holding any additional keys), and drag toward either the right side of the editing area, or toward the bottom of the editing area (depending on whether you want them side-by-side or stacked). You will see an orange outline appear once you start dragging. If the orange box encloses the entire editing area, then the IDE thinks you want to reorder the tab. Keep dragging toward the edge (without going over) and eventually you will see the orange box change to fill either the right half or the lower half (or if you drag the other way, the left half or the top half) of the editing area. Releasing the mouse button at this point will drop the source file in that half of the editing area, leaving you with the two source files side-by-side or stacked.
Here's an example of what it looks like when stacking two source files, just before the mouse button is released:
And here is what it looks like after releasing the mouse button:
If you want to have the same source file duplicated on the screen, open the single source file and follow the instructions above, only hold the CTRL key while clicking-and-dragging.
You can repeat this procedure as many times as you want (as is practical for your screen size), so that you end up with source files in several columns, several rows, or any combination thereof.
When you next open a file, it will be opened in the tab group of the currently selected source file. If you end up with a source file opened in the "wrong" tab group, just drag it to where you want it using the procedure above (allowing the orange box to outline the whole tab group area if you want to drop it in as a tab).
Additional screen shots for reference...
Reordering a tab within the same tab group:
Side-By-Side instead of stacked (two images):
Get as crazy as you want...
Create the above by dragging the second file to the lower half, the third file to the right half of the top half, and the fourth file to the right half of the lower half.
At least in netbeans version 8.1, you can ctrl + i and write "move window".
This will allow you to move the window with the arrows, it is the same as some user posted before but using the keyboard instead of the mouse (I prefer keyboard for this kind of things while I am coding).
I don't know how I accidentally did this but the methods menu in my Eclipse window is too big and I want to resize it back. The menu I'm talking about is the one that pops up when you type a "." after an object and it brings down a list of methods you can use on it. I must have accidentally dragged the menu to large and now I can't drag it back. Does anyone know the name of this menu? Or better yet, how I can resize it back to normal?
This menu can be re-sized like a classic window by putting the mouse pointer at the bottom right of the menu and dragging the mouse to expand or reduce it.
I'm working on an intellisense or code-completion capability for C#.
So far, so good. Right now I have basic completion working. There are 2 ways to request completion. The first cycles through all the potential matches. The second presents a popup menu of the matches. It works for types:
And also for local and instance variables:
I'm confronting two problems with x-popup-menu:
the popup menu can expand to consume all available screen space, when the number of choices is large. Literally it can consume the entire screen, and obscure everything else, including the entire emacs window and every other window.
The silly thing is, it's scrollable. First it expands to consume all available space, then it also becomes scrollable. Seems like it would make sense for it to expand to a certain point, and then become scrollable, rather than expanding to take all available space.
Is there a way I can limit the maximum size of x-popup-menu?
To specify the position of the popup menu, I pass in a position, and x-popup-menu uses that as the *middle*, not the left, of the top line of the menu. Why middle? who knows.
What this means is, if I specify (40 . 60) for the location of the menu, and the menu happens to be 100 pixels wide, the menu will extend beyond the left border of the emacs window. You can see this in the 2nd image above.
If I knew how wide the popup would be before specifying the position, I could compensate. But I don't.
Is there a workaround? Is there a way to get x-popup-menu to take its position as the LEFT rather than the middle?
Addendum: Doc for x-popup-menu
x-popup-menu is a built-in function in `C source code'.
(x-popup-menu POSITION MENU)
Pop up a deck-of-cards menu and return user's selection.
PO SITION is a position specification. This is either a mouse button
event or a list ((XOFFSET YOFFSET) WINDOW) where XOFFSET and YOFFSET
are positions in pixels from the top left corner of WINDOW's frame
(WINDOW may be a frame object instead of a window). This controls the
position of the center of the first line in the first pane of the
menu, not the top left of the menu as a whole. If POSITION is t, it
means to use the current mouse position.
Some people like Emacs because it doesn't provide popup windows (see e.g. this blog entry). The more "emacsy" way of presenting your list of possible completions is to show them in a split buffer. That way you would automatically avoid all of the above issues (screen real estate & scrolling) and would probably attract more of the die-hard Emacs users.
But that's pure speculation :-)
You can base your autocompletion backend on company or autocomplete where display of suggestions is handled for you.