I use podman with a local registry. I am able to pull the images from the command line and also see the manifest. When I deploy my k8s it fails to pull the image with error access denied. Any idea's? I Googled for days now but do not get an answer that works.
I run Ubuntu 22.04 on VMWARE if that maybe makes a difference. Thank you.
kubelet Failed to pull image "localhost:5001/datawire/aes:3.1.0": rpc error: code = Unknown desc = failed to pull and unpack image "localhost:5001/datawire/aes:3.1.0": failed to resolve reference "localhost:5001/datawire/aes:3.1.0": failed to do request: Head "http://localhost:5001/v2/datawire/aes/manifests/3.1.0": dial tcp 127.0.0.1:5001: connect: connection refused
When Kubernetes attempts to create a new pod but is unable to pull the required container image, an error message stating "Failed to pull image" will be displayed. When you try to add a new resource to your cluster with a command like "kubectl apply," you should see this right away. When you inspect the pod with "kubectl describe pod/my-pod," the error will appear in the Events.
Pull errors are caused by the nodes in your cluster. Each node's Kubelet worker process is in charge of obtaining the images required to process a pod scheduling request. When a node is unable to download an image, the status is reported to the cluster control plane.
Images may not pull for a variety of reasons. It's possible that your nodes' networking failed, or that the cluster as a whole is experiencing connectivity issues. If you are online, the registry is up, and pull errors continue to occur, your firewall or traffic filtering may be malfunctioning.
Refer this doc1 and doc2 for more information.
Related
I'm trying to kickstart a MicroK8s cluster but the Calico pod stays on Pending status because of a 403 error against the pull of registry.k8s.io/pause:3.7
This is the error:
Failed to create pod sandbox: rpc error: code = Unknown desc = failed to get sandbox image "registry.k8s.io/pause:3.7": failed to pull image "registry.k8s.io/pause:3.7": failed to pull and unpack image "registry.k8s.io/pause:3.7": failed to resolve reference "registry.k8s.io/pause:3.7": pulling from host registry.k8s.io failed with status code [manifests 3.7]: 403 Forbidden
We're talking about a new server which might be missing some configuration.
The insecure registry, according to Microk8s documentation, is enabled at localhost:3200.
I've enabled the dns on the Microk8s but nothing has change.
If I try to pull from docker I get a forbidden error.
I am using google container registry (GCR) to push and pull docker images. I have created a deployment in kubernetes with 3 replicas. The deployment will use a docker image pulled from the GCR.
Out of 3 replicas, 2 are pulling the images and running fine.But the third replica is showing the below error and the pod's status remains "ImagePullBackOff" or "ErrImagePull"
"Failed to pull image "gcr.io/xxx:yyy": rpc error: code = Unknown desc
= failed to pull and unpack image "gcr.io/xxx:yyy": failed to resolve reference "gcr.io/xxx:yyy": unexpected status code: 401 Unauthorized"
I am confused like why only one of the replicas is showing the error and the other 2 are running without any issue. Can anyone please clarify this?
Thanks in Advance!
ImagePullBackOff and ErrImagePull indicate that the image used by a container cannot be loaded from the image registry.
401 unauthorized error might occur when you pull an image from a private Container Registry repository. For troubleshooting the error:
Identify the node that runs the pod by kubectl describe pod POD_NAME | grep "Node:"
Verify the node has the storage scope by running the command
gcloud compute instances describe NODE_NAME --zone=COMPUTE_ZONE --format="flattened(serviceAccounts[].scopes)"
The node's access scope should contain at least one of the following:
serviceAccounts[0].scopes[0]: https://www.googleapis.com/auth/devstorage.read_only
serviceAccounts[0].scopes[0]: https://www.googleapis.com/auth/cloud-platform
Recreate the node pool that node belongs to with sufficient scope and you cannot modify existing nodes, you must recreate the node with the correct scope.
Create a new node pool with the gke-default scope by the following command
gcloud container node-pools create NODE_POOL_NAME --cluster=CLUSTER_NAME --zone=COMPUTE_ZONE --scopes="gke-default"
Create a new node pool with only storage scope
gcloud container node-pools create NODE_POOL_NAME --cluster=CLUSTER_NAME --zone=COMPUTE_ZONE --scopes="https://www.googleapis.com/auth/devstorage.read_only"
Refer to the link for more information on the troubleshooting process.
Hi you will setup role for cluster to access GCR images for pulling and pushing you can see https://github.com/GoogleContainerTools/skaffold/issues/336
I'm trying to install Ceph using Helm on Kunbernetes following this tutorial
install ceph
Probably the problem is that I installed trow registry before because as soon as I run the helm step
helm install --name=ceph local/ceph --namespace=ceph -f ~/ceph-overrides.yaml
I get this error in ceph namespace
Error creating: Internal error occurred: failed calling webhook "validator.trow.io": Post https://trow.kube-public.svc:443/validate-image?timeout=30s: dial tcp 10.102.137.73:443: connect: connection refused
How can I solve this?
Apparently you are right with the presumption, I have a few concerns about this issue.
Trow registry manager controls the images that run in the cluster via implementing Admission webhooks that validate every request before pulling image, and as far as I can see Docker Hub images are not accepted by default.
The default policy will allow all images local to the Trow registry to
be used, plus Kubernetes system images and the Trow images themselves.
All other images are denied by default, including Docker Hub images.
Due to the fact that during Trow installation procedure you might require to distribute and approve certificate in order to establish secure HTTPS connection from target node to Trow server, I would suggest to check certificate presence on the node where you run ceph-helm chart as described in Trow documentation.
The other option you can run Trow registry manager with disabled TLS over HTTP, as was guided in the installation instruction.
This command should help to get it cleaned.
kubectl delete ValidatingWebhookConfiguration -n rook-ceph rook-ceph-webhook
This is a very wried thing.
I created a private GKE cluster with a node pool of 3 nodes. Then I have a replica set with 3 pods. some of these pods will be scheduled to one node.
So one of these pods always get ImagePullBackOff, I check the error
Failed to pull image "bitnami/mongodb:3.6": rpc error: code = Unknown desc = Error response from daemon: Get https://registry-1.docker.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)
And the pods scheduled to the remaining two nodes work well.
I ssh to that node, run docker pull and everything is fine. I cannot find another way to troubleshoot this error.
I tried to drain or delete that node and let the cluster to recreate the node. but it is still not working.
Help me, please.
Update:
From GCP documentation, it will fail to pull images from the docker hub.
BUT the weirdest thing is ONLY ONE node is unable to pull the images.
There was a related reported bug in Kubernetes 1.11
Make sure it is not your case
I have an image of size of 6.5GB in the Google Container Registry. When I try to pull the image on a Kubernetes cluster node(worker node) via a deployment, an error occurs: ErrImagePull(or sometimes ImagePullBackOff). I used the describe command to see the error in detail. The error is described as Failed to pull image "gcr.io/.../.. ": rpc error: code = Canceled desc = context canceled
What may be the issue and how to mitigate it?
It seems that the kubelet expects a updates on progress during the pull of a large image but this currently isn't available by default with most container registries. It's not ideal behaviour but it appears people have been able to work around it from reading the responses on https://github.com/kubernetes/kubernetes/issues/59376 and Kubernetes set a timeout limit on image pulls by adjusting the timeout
Use --image-pull-progress-deadline duration as a parameter when you start the kubelet.
This is documented in the kubelet documentation.
If no pulling progress is made before this deadline, the image pulling will be cancelled. (default 1m0s)