When I run the sentinel register tesla_ai.jir -set_active true -mode ir command in Jaseci after closing the terminal, I get a Python error. What could be causing this issue?
Here is the error message:
File "/usr/local/lib/python3.10/site-packages/urllib3/connection.py", line 174, in _new_conn
conn = connection.create_connection(
File "/usr/local/lib/python3.10/site-packages/urllib3/util/connection.py", line 95, in create_connection
raise err
File "/usr/local/lib/python3.10/site-packages/urllib3/util/connection.py", line 85, in create_connection
sock.connect(sa)
ConnectionRefusedError: [Errno 61] Connection refused
During handling of the above exception, another exception occurred:
This occured while typing jaseci > sentinel register tesla_ai.jir -set_active true -mode ir
Three things are happening here:
First, we registered the jir we compiled earlier to new sentinel. This means this new sentinel now has access to all of our walkers, nodes and edges. -mode ir option speciifes a jir program is registered instead of a jac program.
Second, with -set_active true we set this new sentinel to be the active sentinel. In other words, this sentinel is the default one to be used when requests hit the Jac APIs, if no specific sentinels are specified.
Third, sentinel register has automatically creates a new graph (if no currently active graph) and run the init walker on that graph. This behavior can be customized with the options -auto_run and -auto_create_graph.
Restart the terminal or the entire computer to see if the issue is temporary and resolve it.
Check if I have the latest version of Jaseci installed. Try updating it to see if that resolves the issue.
Ensure that MY environment has the required dependencies and libraries installed for Jaseci to run correctly.
Related
Does anyone encounter this issue?
Connection to server got closed. Server will not be restarted.
This I am getting when I am checking out to old commit and in locus-dashboard (there we do have an old version of flow) and then switching back to current. Then it starts throwing an error Connection to server got closed. Server will not be restarted..
This are the logs of flow.
[Info - 12:03:15 PM - locus-dashboard-v2/.flowconfig] Found flow using option `useNPMPackagedFlow`
[Info - 12:03:16 PM - locus-dashboard-v2/.flowconfig] Using flow '/Users/shubanusharma/workspace/locus-dashboard-v2/node_modules/flow-bin/flow-osx-v0.111.3/flow' (v0.111.3)
Unhandled exception: (Sys_error "/tmp/daemon_param688afa.bin: Permission denied")
Raised by primitive operation at file "stdlib.ml", line 316, characters 29-55
Called from file "filename.ml", line 259, characters 7-73
Re-raised at file "filename.ml", line 261, characters 30-37
Called from file "hack/utils/sys/daemon.ml", line 267, characters 2-53
Called from file "hack/utils/jsonrpc/jsonrpc.ml", line 215, characters 4-357
Called from file "src/lsp/flowLsp.ml", line 1555, characters 15-36
Called from file "src/commands/commandUtils.ml", line 13, characters 4-32
[Error - 12:03:16 PM] Connection to server got closed. Server will not be restarted.
I've tried cleaning up node_modules, Clearing yarn and npm cache, reinstalling extension.
This seems to be a Catalina permissions issue running flow with sudo works for flow but vscode extension have same issue still.
Not a permanent solution but changing tmp folder permissions to 777 fixing this.
Go to your repo dir and stop server yarn flow stop
Change /tmp dir permissions sudo chmod 777 /tmp
Start flow server yarn flow start
Restart vscode flow client by cmd+shift+p(windows ctrl+shift+p) type restart client press enter
[EDIT 15-jun-2021]
In most cases just giving permission is enough no need of stopping the server
Also, this not only happens in Catalina happens Catalina onwards
Mac OS Catlina
Mac OS Mojave
I've found both contains the issue
I am trying to install airflow (distributed mode) in WSL, I got the setup of Airflow webserver, Airflow Scheduler, Airflow Worker, Celery (3.1) and RabbitMQ.
While running the Airflow Scheduler it is throwing out this error (below) even though the backend is set up.
ERROR
Traceback (most recent call last):
File "/usr/local/lib/python3.6/dist-packages/airflow/executors/celery_executor.py", line 92, in sync
state = task.state
File "/usr/local/lib/python3.6/dist-packages/celery/result.py", line 398, in state
return self._get_task_meta()['status']
File "/usr/local/lib/python3.6/dist-packages/celery/result.py", line 341, in _get_task_meta
return self._maybe_set_cache(self.backend.get_task_meta(self.id))
File "/usr/local/lib/python3.6/dist-packages/celery/backends/base.py", line 288, in get_task_meta
meta = self._get_task_meta_for(task_id)
AttributeError: 'DisabledBackend' object has no attribute '_get_task_meta_for'
https://issues.apache.org/jira/browse/AIRFLOW-1840
This is the exact error I am getting but couldn't find a solution.
Result Backend-
result_backend = db+postgresql://postgres:****#localhost:5432/postgres
broker_url = amqp://rabbitmq_user_name:rabbitmq_password#localhost/rabbitmq_virtual_host_name
Help please, gone through almost all the documents but couldn't find a solution
I was facing the same issue on celery version - 3.1.26.post2 (with rabitmq,postgresql and airflow),the reason for this issue is the dictionary used in celery base.py file at(lib/python3.5/site-packages/celery/app/base.py)
does not capture celery backend at key CELERY_RESULT_BACKEND instead it captures at key result_backend.
So the solution here is go to _get_config function available in base.py file at(lib/python3.5/site-packages/celery/app/base.py),at the end of the function before returning dictionary s add the below code.
s['CELERY_RESULT_BACKEND'] = s['result_backend'] #code to be added
return s
This solved the problem.
Currently I am trying to follow the MathWorks tutorial 1 to register a TE0720 with a TE0701-6 carrier board in Matlab. I followed the instructions, designed the block design and exported it as advised. Using the Matlab HDL Workflow Advisor I can follow unitl step 4.1 Create Project. Here, I get the following error message:
invalid command name "CONFIG.PCW_INCLUDE_ACP_TRANS_CHECK"
while executing
"CONFIG.PCW_INCLUDE_ACP_TRANS_CHECK {0} CONFIG.PCW_IOPLL_CTRL_FBDIV {30} CONFIG.PCW_IO_IO_PLL_FREQMHZ {1000.000} CONFIG.PCW_IRQ_F2P_INTR {1} CONFIG..."
(procedure "create_root_design" line 49)
invoked from within
"create_root_design """
(file "vivado_custom_block_design.tcl" line 986)
while executing
"source vivado_custom_block_design.tcl"
(file "vivado_create_prj.tcl" line 15)
This is regarding the exported block design in the corresponding *.tlc file.
After deleting the line mentioned in the error, the error persists, but for the following line. This holds true until I deleted all lines following
CONFIG.PCW_IMPORT_BOARD_PRESET {preset}
It seems to me that once the preset for the board is imported, all following commands are seen as invalid. If I put this line in the end of the list though, I get the error
ERROR [Common 17-69] Command failed: Missing name/value pair in -dict argument.
If I remove this line, I get the error
ERROR [BD 41-1811] The interconnect </axi_interconnect_0> is missing a valid master interface connection
ERROR [Common 17-39] 'validate_bd_design' failed due to earlier errors.
Is there a way to fix this or what is the problem here?
EDIT: I am using Vivado 2017.4 from the Vivado HL WebPACK. Could it be that there is a feature not available in this version for rebuilding the project as MATLAB intends to do?
EDIT 2: I started the complete tutorial fresh from scratch again and now I only get the error
ERROR: [BD 41-1811] The interconnect </axi_interconnect_0> is missing a valid master Interface connection
when going throught the HDL Workflow Advisor. As far as I understand the issue, Vivado searches for something to connect the axi_interconnect to. But isn't this the interface port (DUT) as described later in the tutorial (end of step 2 in Register the custom reference design in HDL Workflow Advisor, where the compiled simulink model should be connected?
I'm trying to communicate with an AD9913 evaluation board (Analog Devices), which has a Cypress FX-2 USB controller. I wrote a fully functional Python library which works flawlessly on Windows 7 (using a driver generated through libusb-win32-1.2.6.0's inf-wizard.exe), but now I try to run the same software from a Raspberry Pi 3 with Raspbian Jessie and cannot seem to write or read.
The following minimal example works on Windows 7:
import os
os.environ['PYUSB_DEBUG'] = 'debug'
import usb.core
print "usb.core file:", usb.core.__file__
# get device
dev = usb.core.find(idVendor=0x0456, idProduct=0xEE25)
if dev is None:
raise ValueError("Device not found")
dev.set_configuration()
# get the firmware version
print "Write: ", dev.write(0x01, [0x00])
print "Read: ", dev.read(0x81, 7)
The ouput here is:
usb.core file: C:\Python27\lib\site-packages\usb\core.pyc
Write: 1
Read: array('B', [1, 0])
However, on the Raspberry several problems occur. First, the product ID is 0xEE24 (which I found out through dmesg), and second, the code example above gives
usb.core file: /usr/local/lib/python2.7/dist-packages/usb/core.pyc
Write:
Traceback (most recent call last):
File "usbtesting_minimal_linux.py", line 29, in <module>
print "Write: ", dev.write(0x01, [0x00])
File "/usr/local/lib/python2.7/dist-packages/usb/core.py", line 948, in write
self.__get_timeout(timeout)
File "/usr/local/lib/python2.7/dist-packages/usb/backend/libusb1.py", line 824, in bulk_write
timeout)
File "/usr/local/lib/python2.7/dist-packages/usb/backend/libusb1.py", line 920, in __write
_check(retval)
File "/usr/local/lib/python2.7/dist-packages/usb/backend/libusb1.py", line 595, in _check
raise USBError(_strerror(ret), ret, _libusb_errno[ret])
usb.core.USBError: [Errno 5] Input/Output Error
I'm executing the script by calling sudo python minimal_example.py, otherwise (as expected) I get usb.core.USBError: [Errno 13] Access denied (insufficient permissions). (For the testing described above, I removed the udev rules I added to allow access to my regular user account, and rebooted and replugged the device afterwards.)
I also noticed that on Windows, Configuration 1 (which is the only configuration) as revealed by adding
cfg = dev.get_active_configuration()
to aforementioned example script, has only one Interface 0, where as on Linux Interface 0 has no endpoints, but there are additional interfaces Interface 0, 1, Interface 0, 2 and Interface 0,3, the first of which is identical to the sole interface shown by Windows.
Detaching kernel drivers as described in this post -- which given my current understanding as a USB novice should not be necessary here -- does not resolve the problem.
I suspect that the issue stems from a difference between the Windows/libusb and Linux implementation/backend of the USB communication (already hinted at by the fact that the productID shown is different for the very same piece of hardware attached), which might require some changes to the way I'm writing to the USB endpoint.
I'm happy to provide more information if needed and welcome all hints and suggestions.
Most likely, this error caused by the firmware is not uploaded. Usually speaking, FX-2 USB controller does not save the firmware.
Although I still cannot communicate with the device on the Raspberry Pi, the Error 5 problem is resolved by explicitly selecting a suitable alternate setting with proper endpoints, e.g.
dev.set_interface_altsetting(interface = 0, alternate_setting = 1)
Then read/write requests no longer fail with Error 5, but with a timeout error (which is Error 110 for libusb1 and None for libusb0).
I now suspect that there is a problem with how the device is detected by the operating system, since not only the productID changes between Windows and Linux, but also wMaxPacketSize for the endpoints I'm interested in is given as 64 bytes on Windows and 512 bytes on Linux.
Once I'm further along in my troubleshooting, I will either open a new question and add the link as a comment to this answer (or post the whole solution here in case I can solve everything right away).
i am trying to configure Google App Engine on Eclipse and use it to run a python application locally (on the local host):
for this i used following tutorial as a guide:
http://www.mkyong.com/google-app-engine/google-app-engine-python-hello-world-example-using-eclipse/
i followed the steps properly but when i try to use the configuration i get errors the console output is:
Console Output:
C:\Program Files (x86)\Google\google_appengine\google\appengine\api\search\search.py:232: UserWarning: DocumentOperationResult._code is deprecated. Use OperationResult._code instead.
'Use OperationResult.%s instead.' % (name, name))
C:\Program Files (x86)\Google\google_appengine\google\appengine\api\search\search.py:232: UserWarning: DocumentOperationResult._CODES is deprecated. Use OperationResult._CODES instead.
'Use OperationResult.%s instead.' % (name, name))
WARNING 2012-06-20 14:53:01,451 rdbms_mysqldb.py:74] The rdbms API is not available because the MySQLdb library could not be loaded.
Traceback (most recent call last):
File "C:\Program Files (x86)\Google\google_appengine\dev_appserver.py", line 126, in
run_file(file, globals())
File "C:\Program Files (x86)\Google\google_appengine\dev_appserver.py", line 122, in run_file
execfile(script_path, globals_)
File "C:\Program Files (x86)\Google\google_appengine\google\appengine\tools\dev_appserver_main.py", line 694, in
sys.exit(main(sys.argv))
File "C:\Program Files (x86)\Google\google_appengine\google\appengine\tools\dev_appserver_main.py", line 582, in main
root_path, {}, default_partition=default_partition)
File "C:\Program Files (x86)\Google\google_appengine\google\appengine\tools\dev_appserver.py", line 3142, in LoadAppConfig
raise AppConfigNotFoundError
google.appengine.tools.dev_appserver.AppConfigNotFoundError
The configuration i am using is:
Windows 7 64 bit
python 2.7
Eclipse Helios
What could be the possible mistake in configuring the GAE?
Additional info : when i try to use the project with GAE manually(ie by using the launcher) it works
Update:
i experimented and discovered that since the workstation and the python installation folder is not in the same directory i get these errors
got the hint from here:
File
"C:\Program Files(x86)\Google\google_appengine\google\appengine\tools\dev_appserver.py"
line 582, in main
root_path, {}, default_partition=default_partition)
but when i made another workspace in the same partition i got this as console output and the the local host is still not working
output
C:\Program Files (x86)\Google\google_appengine\google\appengine\api\search\search.py:232: UserWarning: DocumentOperationResult._code is deprecated. Use OperationResult._code instead.
'Use OperationResult.%s instead.' % (name, name))
C:\Program Files (x86)\Google\google_appengine\google\appengine\api\search\search.py:232: UserWarning: DocumentOperationResult._CODES is deprecated. Use OperationResult._CODES instead.
'Use OperationResult.%s instead.' % (name, name))
WARNING 2012-06-20 17:20:56,719 rdbms_mysqldb.py:74] The rdbms API is not available because the MySQLdb library could not be loaded.
Runs a development application server for an application.
dev_appserver.py [options]
Application root must be the path to the application to run in this server.
Must contain a valid app.yaml or app.yml file.
Options:
--address=ADDRESS, -a ADDRESS Address to which this server should bind(Defaultlocalhost).
--clear_datastore, -c Clear the Datastore on startup. (Default false)
--debug, -d Use debug logging. (Default false)
--help, -h View this helpful message.
--port=PORT, -p PORT Port for the server to run on. (Default 8080)
--allow_skipped_files Allow access to files matched by app.yaml's
skipped_files (default False)
--auth_domain Authorization domain that this app runs in.
(Default gmail.com)
--backends Run the dev_appserver with backends support
(multiprocess mode).
--blobstore_path=DIR Path to directory to use for storing Blobstore
file stub data.
--clear_prospective_search Clear the Prospective Search subscription index
(Default false).
--datastore_path=DS_FILE Path to file to use for storing Datastore file
stub data.
(Defaultc:\users\anukoo~1\appdata\local\temp\dev_appserver.datastore)
--debug_imports Enables debug logging for module imports, showing
search paths used for finding modules and any
errors encountered during the import process.
--default_partition Default partition to use in the APPLICATION_ID.
(Default dev)
--disable_static_caching Never allow the browser to cache static files.
(Default enable if expiration set in app.yaml)
--disable_task_running When supplied, tasks will not be automatically
run after submission and must be run manually
in the local admin console.
--enable_sendmail Enable sendmail when SMTP not configured.
(Default false)
--high_replication Use the high replication datastore consistency
model. (Default false).
--history_path=PATH Path to use for storing Datastore history.
(Default c:\users\anukoo~1\appdata\local\temp\dev_appserver.datastore.history)
--multiprocess_min_port When running in multiprocess mode, specifies the
lowest port value to use when choosing ports. If
set to 0, select random ports.
(Default 9000)
--mysql_host=HOSTNAME MySQL database host.
Used by the Cloud SQL (rdbms) stub.
(Default 'localhost')
--mysql_port=PORT MySQL port to connect to.
Used by the Cloud SQL (rdbms) stub.
(Default 3306)
--mysql_user=USER MySQL user to connect as.
Used by the Cloud SQL (rdbms) stub.
(Default )
--mysql_password=PASSWORD MySQL password to use.
Used by the Cloud SQL (rdbms) stub.
(Default '')
--mysql_socket=PATH MySQL Unix socket file path.
Used by the Cloud SQL (rdbms) stub.
(Default '')
--persist_logs Enables storage of all request and application
logs to enable later access. (Default false).
--require_indexes Disallows queries that require composite indexes
not defined in index.yaml.
--show_mail_body Log the body of emails in mail stub.
(Default false)
--skip_sdk_update_check Skip checking for SDK updates. If false, fall back
to opt_in setting specified in .appcfg_nag
(Default false)
--smtp_host=HOSTNAME SMTP host to send test mail to. Leaving this
unset will disable SMTP mail sending.
(Default '')
--smtp_port=PORT SMTP port to send test mail to.
(Default 25)
--smtp_user=USER SMTP user to connect as. Stub will only attempt
to login if this field is non-empty.
(Default '').
--smtp_password=PASSWORD Password for SMTP server.
(Default '')
--task_retry_seconds How long to wait in seconds before retrying a
task after it fails during execution.
(Default '30')
--use_sqlite Use the new, SQLite based datastore stub.
(Default false)
Invalid arguments
seems like the arguments to dev_appserver.py are incorrect any ideas
If you did the same mistake as mine,then its a very high chance that you have space in the name of your directory
The warnings about deprecated things in search can be ignored. As can the message about the rdbms API if you don't plan on using that.
AppConfigNotFoundError happens when there is no app.yaml in the directory passed to dev_appserver.py. If you followed those instructions, then your app.yaml would be in the 'src' directory, and the 'program arguments' in the build command would be ${project_loc}/src - is this the case? When you run from the command-line, and see it work, what command are you running, and from what location?