While using pipelines, i noticed that the first run of the pipeline needs to be a manual one.Is there a way to automatically trigger the first run of the pipeline.
I created a pipeline source using git integration. I could see pipelines , but had to trigger them manually.My assumption was that they will be triggered after creation of the pipelines.
When a pipeline source is first added, your pipelines are "synced" to the system. This action will not cause any pipeline to be triggered. Similarly when you update your pipelines configuration yaml and push your changes, your pipelines will again "sync" but these changes will not cause any pipeline to be triggered.
Additionally, when you're using a multibranch pipeline source, a "sync" occurs every time a new branch is created, but the pipelines for the new branch will not be triggered.
If you're developing on a new branch locally, and you add some commits, and push your branch for the first time, that action will only cause a sync. It will not trigger a run of the pipeline. In this case, you may need to trigger the pipeline manually or send another commit to produce a commit webhook.
I'd recommend manually creating the branch at the source so that the new branch's pipeline will be created before any new commits are added. Then when you push a new commit to the existing branch, it will cause a run to be triggered.
This behavior isn't explicitly documented but you can read about adding pipeline sources here
and some information specifically about multibranch pipelines here
Related
I've got a Azure Devops project that's deploying to an app service that has a workflow that looks like this:
On PR creation, build gets triggered.
Build kicks off a CD pipeline to deploy app service to a staging slot
Stage 2 of the CD pipeline is swap staging and prod. This requires an approval
PR Still needs to get completed manually
The reason I wanted to build it this way was so that anyone pushing changes to the repo could validate them in the staging slot in the live environment before they went into prod. The flow seems to work, except that there are two things to do at the end of a change. The approver must approve the swap to prod task in the pipeline, and the associated PR must be completed. I've found cases where the PR never gets completed, which means that you end up with unmerged changes.
Is there a way that I can have the release pipeline (which is triggered off a PR build) complete the associated PR as part of a release stage? I'd like to make sure that what gets merged into the main branch is the current code, so I'd rather not change it to trigger on PR completion because at that point things are already merged, and a breaking change would have to be undone. The other way I figure I could handle it would be to:
On PR Creation, trigger a validation build, and a release pipeline to deploy to the dev slot.
On PR completion, trigger a release pipeline to deploy the PR build to prod.
This would change the approval flow a little, but might be better at making sure that the PR gets completed properly.
I actually ended up coming up with a different flow for this. What I got working was:
Create PR for feature branch
PR creates build
Staging release pipeline triggers off PR, and deploys to a staging slot
Changes can be validated in staging
PR completion merges to main branch
Merge to main triggers a CI build pipeline
CI build triggers a release pipeline that goes to the prod slot
This means that the PR must be completed in order to release to prod. It does mean that the build that goes into prod isn't necessarily the same one that's in staging, but it's built from the same code, so that should be identical.
I have a ADO git repo with a YAML-based build pipeline that builds a docker image, runs some tests using Docker Compose, and then pushes the image and a helm chart to an ACR.
I'd like the have the build/test part run on PRs too. I have created a second pipeline that's just the first half of the normal build, and assigned it as a Build Validation pipeline for a branch.
However, I don't seem to be able to get the triggers right. If I have trigger: none in the test pipeline, it never triggers. If I have branch names, it is also run on merge alongside the normal build pipeline. How is this supposed to work? The docs define all the individual parts, but not really how they are expected to interact!
Am I supposed to have a multistage pipeline and use that somehow for the validation? (it's just 4 Steps in one Job in one Stage currently).
I am hoping to avoid building the same image too many times, or storing untested images anywhere outside the build agent.
I make it work with the following configuration:
In my YAML pipeline, I set the trigger: none.
In branch policies of a branch, I create a build validation with automatic trigger:
Then I create a pull request to that branch, and the pipeline runs automatically:
There are two possible mistakes:
The "Manual" trigger is selected in build validation, so that the pipeline needs to be run manually rather than triggered automatically.
The branch with branch policy set should be the same branch as the target branch of pull request.
My goal is to block a PR completion until a change has gone through a CI pipeline and been deployed in a test release pipeline successfully. Additionally, I want to control which CI pipeline builds enter the release pipeline, so release entries don't get added with every PR commit.
I currently have the CI pipeline setup and working and I have a release pipeline working with manual additions.
To solve my problem, I tried to modify the Release pipelines Build Artifacts settings to use Pull request triggers for a specific target branch. Then, in the Release pipeline stage's pre-deployment conditions, I've selected a trigger of "After release" with pull request deployment enabled. However, I'm not seeing releases automatically created.
Is what I want possible? Are there other steps to execute this?
How can I block PR completion until a release succeeds in Azure DevOps?
To achieve this, you could add the release pipeline as Status Checks in the Branch Policies:
Detailed steps:
Add the CI pipeline as Build Validation in the Branch Policies for the specific target branch.
Do the same release pipeline settings as you, enable Pull request triggers for the specific target branch and enable pull request deployment.
Add the release pipeline as Status Checks in the Branch Policies for the specific target branch.
Note:
If you could not see the release pipeline in the list when you add
the Status Checks:
Please try to change the Source type of the release from Build Artifacts to Azure devops repos for the specific target branch, and also enable Pull request triggers for the specific target branch. Then, create a pull request to trigger this release pipeline. After that, we refresh the Branch Policies, we will see the release pipeline.
Now, we change the Source type of the release back to Build Artifacts and enable Pull request triggers for the specific target branch and enable pull request deployment.
The reason why you did not see releases automatically created may be that your build pipeline is not triggered by PR (maybe manually).
Mytest result :
If I do not set the release pipeline as Status Checks, just enable Pull request triggers and pull request deployment, it will set as Optional, it will not block PR completion:
I have a repo which has two branches:
develop (repo's default branch)
master
Code within the develop branch is known to be releasable as an "alpha" version, while code within master is known to be production ready.
Currently, the develop branch's policies requires that a CI build must successfully complete for the PR to merge. That build will create NuGet package artifacts with a prerelease tag (alpha-####).
A release pipeline is responsible for taking these packages and publishing them to an internal NuGet feed.
What I'm trying to achieve is to have the release pipeline triggered automatically when the PR is completed, not whenever the CI build succeeds.
I expected the "pull request trigger" to do just that, but much to my surprise the trigger won't acknowledge the PR's status and have the release pipeline start as soon as the CI build is completed.
This means that if the PR gets rejected for whatever reason, a NuGet may still be deployed to my feed!
What am I doing wrong here? How come the pull request trigger doesn't work any differently than the continuous deployment trigger? What's it's purpose then? :/
The continuous deployment trigger means, if you specify certain types of artifacts in a release pipeline, you can enable continuous deployment. This instructs Azure Pipeline to create new releases automatically when it detects new artifacts are available.
The Pull request trigger means, once a pull request release is configured, anytime a pull request is raised for the protected branch, a release is triggered automatically, deployed to the specified environments.
So these two triggers are different and more detailed information you can refer to here.
https://learn.microsoft.com/en-us/azure/devops/pipelines/release/deploy-pull-request-builds?view=azure-devops
https://learn.microsoft.com/en-us/azure/devops/pipelines/release/triggers?view=azure-devops
And if you still want to deploy your Nuget after a PR completed, I recommend you to create a new build pipeline and enable the Continuous integration for it. Then set this build pipeline as the Release pipeline Artifact.
Because when a PR completed, it will create a new commit to the target branch and this new commit will trigger the build pipeline, and the build pipeline will trigger the release pipeline to deploy the Nuget as your expected.
Not sure if anyone's still looking for a solution to this over a year after the fact, but I was so I wrote an Azure Function app to receive pull request close webhooks from DevOps and translate those events into new releases.
You can find it here on my github: https://github.com/GravlLift/OnPullRequest
Feel free to fork it to fit whatever your individual needs are.
I have set up a pull request release trigger in the following way.
I want to deploy Artifacts from VerifyApiTestEnvironment branch whenever pull request into that branch is successfully completed.
This is how my artifacts look.
This is how my CD trigger looks like.
This is how my pre-deployment conditions look like.
This is how my policy screen looks.
This is how my branch structure looks. I am always getting an error in the build saying source branch missing the changes from master when I complete the pull request targeting the VerifyApiTestEnvironment branch. What could be the reason behind this?
Every time I am committing my changes to a featureBranch and then I open a pull request for it to merge into VerifyApiTestEnvironment branch.
I expect to trigger a release and then a deployment every time I do this, but the release is not getting triggered.
Am I missing something related to configuring PR triggers?
The setting of yours has some problem. As Daniel said, it is used to set as deploy with a PR created. In addition, if you want to deploy just after PR is completed, the source of this release should be Repository instead of build pipeline.
So, first, you need to change your release source as Azure Repository:
And then, enable Continuous deployment trigger. While the PR completed, it means that code change are merged into the target branch of Repository. So, this need to be enabled, or the deploy will not be triggered while the PR is completed.
In addition, you need to set branch filter, or the deploy will be triggered no matter which branch is changed. Here I set just merge into master branch( PR target branch is master) can trigger this CD.
For this option, it just be use for the PR created trigger deploy. Since you just want deploy triggered by the PR completed, so you do not need enable it.
Now, if your master has policy that the code change applied successfully only after PR created and verified, the CD will be executed only after PR completed.
For some configuration of policy, build policy is used to set build trigger, and status policy used to trigger the release.
So, according to your policy setting, it's used to trigger the build first, and then the build will trigger the release. It's not directly trigger the deploy just after the PR completed.