We are triggering Jekins job from JIRA using a WebHook, (http://XXXXXXXX/jira-trigger-webhook-receiver/), it is working absolutely fine.
Now our requirement is to pass current selected JIRA ticket key(IssueID) to Jenkins job to capture and in return send "Build status" .
I had tried http://XXXXXXXX/jira-trigger-webhook-receiver/{{ssue.key} but didn't work,
Please provide us the JIRA web hook which can carry jira issue ID as attributes .
I had tried http://XXXXXXXX/jira-trigger-webhook-receiver/{issue.key} but didn't work,
Please provide us the JIRA web hook which can carry jira issue ID as attributes .
Related
I am using bitbucket and jenkins as my CI/CD solution.
I am running a sanity job everytime Pull request is raised. I want to send email notification on the success or failure of the job to the owner of the pull requuest. The challenge I am facing is I am not able to get the user information for the PR in jenkins pipeline.
Anybody has solved this porblem ?
Here's a different approach to this: instead of directly emailing the author of the PR, use the Bitbucket API to write a comment on the PR (doc). Since you would already have the PR ID, it's just a matter of sending a POST request.
By default, any comments written on a Bitbucket PR automatically trigger an email to the PR author + PR reviewers so they will be getting notified via email as well.
I have been reading the Azure Devops docs and I am completely confused by them. All I want to is something very simple (simple with Github Actions in Github anyway) where
A developer creates a PR.
As the PR is created Azure runs all the associated Cypress tests
If any fail then the notes at the top of the PR indicate this. For example just next to the bit where it says 'there are merge conflicts'
We had this working in Github, but I can't figure it out here.
Thanks
There is no extension like "Cypress GitHub app" in azure devops, so it is impossible to achieve exactly the same function as in github pull request.
As a workaround , you can try to add status policy.
Using status alone, details from an external service can be provided
to users within the PR experience. Sometimes, sharing information
about a PR is all that is necessary, but in other cases PRs should be
blocked from merging until requirements are met. Like the in-box
policies, the Status policy provides a way for external services to
block PR completion until requirements are met. If the policy is
required, it must pass in order to complete the pull request. If the
policy is optional, it is informational only, and a status of
succeeded is not required in order to complete the pull request.
External services can use the PR Status API to post detailed status to your PRs. The branch policy for external services brings the ability for those 3rd party services to participate in the PR workflow and establish policy requirements. This article guides you through the process of configuring a branch policy for a service that is posting PR status.
In addition, here is a ticket about how to create required pull request status check, you can refer to it.
Completely new to Webhook concept and Rundeck. I have a job in rundeck where it checkes health of some servers, code being in python.
Fetch 200 Ok status after running Curl Command and using that status write a condition using python in RUNDECK
i want to use webhook to provide update via email/slack channel to 5-6 users
Created a webhook, i selected a job which it should invoke, but i didnt understand what options to be entered options section[Job Option arguments, in the form -opt1 value -opt2 "other value"]
when i click on the webhook URL it gives 404 error found.
this might be the very basic questions. sorry kindly help
i want to use webhook to provide update via email/slack channel to 5-6 users
Webhooks are used to enable third-party applications to trigger jobs. If you just want to send notifications of job status when a job is run, you don't need to use a webhook.
When you configure the job there's a "Notifications" tab. You can select when and how to send notifications. For slack specifically, there is a notification plugin you can install.
To pass options to webhook you need to pass it in this way. Here you have a good example to integrate it with python code.
UPDATE: Anyway, this answer is the way to achieve your goal.
Again i got stuck to achive the target to trigger deployment once code is pushed to repo, I search the net but i found only old information github is updated and as per there instruction i setup all values but still not working so its look i am missing something I tried to follow the instruction but it seems old http://bytes.babbel.com/en/articles/2014-01-22-github-service-hook-for-aws-ops-works.html
The interface is confusing and i am confused because there is no connection between repo name and opswork service , so what value webhook should send to opswork service ?
Below is what i understood
Setup webhook and it will trigger and send pay load to CI or services as needed once code is pushed to repo (this part is working and send payload to some where) : But this is failing because its Payload URL should i give the opswork service url generated by git hub ?
Opswork services : This is not working ,
App
Given from AWS opswork's app : opswork ID
Stack
Given from AWS opswork's stack: opswork ID
Branch name
Here is the confussion again as per github help i need to give the SHA configured for that app in the AWS OpsWorks Console ? Why should i give SHA not the Master or the link of repo ?
GitHub api url
This is optional what should i give here ?
Aws access key
No issues
Aws secret access key
No issues
GitHub token
Optional : Created token as instructed , Both with token and without token not working.
So If you check opswork is not getting triggered , I thought when i push the changes it may work internally but not.
So its seems web hook and opswork service need to be interact at some level but unable to figure it out :(
I checked git hub help also found nothing for new interface
I checked google and stackoverflow too , but not found any thing
Kindly anyone please answer .
One alternative way would be to set up AWS CodePipeline (CodeDeploy??) to deploy to your AWS Opsworks stack.
CodePipeline is a Continuous Delivery solution from Amazon. Mid 2016 they announced that CodePipeline works with OpsWorks - see their blog announcement: AWS CodePipeline Adds Integration with AWS OpsWorks. There's some walkthroughs there too, depending on what version of OpsWorks your stack is set up for.
(It does feel a bit weird to use a deployment service to deploy to a service that has an existing deployment service... but eh, thought this might help)
The problem is with the process of Github and opswork , if there is any error then both do not report user with error.
I contacted to Github support and luckily they responded me back with error message "The security token included in the request is invalid."
Then i recopied the access key and secret key removed "GitHub api url" as blank and branch name to "master" (so it will always deploy the latest version aka head)
Also make sure you need to set permission again in opswork this is separate to IAM permission ,
Steps -> Goto your stack - Permission and edit -> add user github with permission "IAM Policies Only".
There is no interaction between web hooks and integrations . so you can make use of integration services without web hook :) .
Thanks to Stack overflow , Git-hub both :)
I am familiar with Jenkins Pull Request Builder and I had set up a freestyle job with it to build my project based on the comment that authorized user put. (For example test in prod) in the past.
Now I am trying to use a Jenkins 2.0 with github organization plugin for one of my project.
this is the scenario:
A User is making a PR to master(or some other sensitive branch)
A test is going to get run automatically.
After the test past, an authorized user needs to go to the PR and put a comment Deploy to test environment and then a jenkinsfile that was waiting for this input needs to get trigger.
I just dont know how to do the step 3. how do I make jenkins pipeline job listen for comments in github repo pull requests? the Jenkins documentation is not really clear about the input from user part.
I read this thread answer but the documentation about the Gates approval is really limited.
I know this is super late, but here's some info for future Googlers:
I have a Github webhook that sends the event to a Lambda function that will parse the event for a specific comment string, then create an HTTP POST request for the Jenkins job, which is configured to allow builds to be triggered remotely.
So: open PR > comment on PR 'Deploy to test environment' > webhook sends to AWS APIGateway > AWS SNS topic > AWS Lambda > parse the event for comment > If comment matches, create HTTP POST > Jenkins receives request and runs job
There's a lot of documentation on this, but none of it together, so here are the resources that I used:
Regarding allowing jobs to be triggered remotely:
https://wiki.jenkins-ci.org/display/JENKINS/Remote+access+API
Using Github to trigger Lambda function:
https://aws.amazon.com/blogs/compute/dynamic-github-actions-with-aws-lambda/
Github API. You will want to pay particular attention to the Issues API:
https://developer.github.com/webhooks/