during typying code and auto save in vscode, output tab automatically running. It's so uncomfortable.
is there are anyone who give me some help?
I've been trying to my self but I didn't find solution
This happens when code-runner extension is installed in vs code.
Disable code-runner extension and reload the vs code.
Coming from IDLE, I am used to be able to just left-click python files anywhere, it'll launch IDLE, and then pressing F5 just runs the script. In VSCode however, I have to open the terminal, cd into the right directory, and only then can I finally run my python script. Is there a way to change this behavior?
I was recommended to use the Code Runner extention and bound the Run Code (code-runner.run) command to my F5 key.
Then I noticed input() not being ran so I had to make sure code-runner.runInTerminal was on, but that re-started my problem from the beginning because the terminal was at the wrong working directory and then I finally found the code-runner.fileDirectoryAsCwd setting to run it from there.
I think this solution is similar to this one for the python extention, but I'm not sure if that would cause the whole wrong working directory issue again.
choose from menu file then click on auto save
I'm using Python 3.8 on VScode, but I can't seem to get the program to write anything in output, even with simple commands like: print("Hello world!"). It shows up in the terminal well enough, so the code shouldn't be the problem. Do i need to fix anything in the setting to make it show the output?
1: Picture of terminal:
Please could you check your user settings.json and workspace settings.json for the existence of a setting for terminal.integrated.shell.*.
I believe you may have changed the shell to use command prompt instead of powershell.
Also, please could you provide some screenshots of the terminal
And any errors logged in the console widows (go to Help->Toggle Developer Tools)
My VS code terminal was working fine, until one day when I tried to work on a project, that was still open in VS code, my terminal didn't allow me to type any commands. I couldn't type anything. This is the screen that I get.
Okay, for those of you struggling with the same problem, I've managed to solve it by clicking on the drop-down menu that says powershell and changing it to cmd.
this happened to me and simply
close vs code
right click on it
run as administrator
open the terminal and it will work
this problem happened when I changed the default path of CMD
For me, I tried using Powershell/CMD/Bash and I was having errors/blank terminal. I found typing echo hello and pressing CTRL + C made it appear. So in fact, everything was working, my terminal was just blank/glitched out, but was really accepting input.
I had a similar issue when running ionic serve command which runs the development server on the localhost. I paid attention after executing the command above, and it said:
Use Ctrl+C to quit this process
Pressing Ctrl+C then displays:
Terminate batch job (Y/N)?
Type Y or y
then the command prompt is shown again!
Here is a sample terminal window - trimmed for brevity:
For who has this problem using React. This happens when you start a live version using npm start. The terminal that handles the live version of the app cannot be used for anything else.
So to continue using the terminal you need to open a new terminal to use in parallel. To do so just click on the plus icon in the top right corner of the terminal panel then choose the "Power Shell" option. This will open a new terminal without restarting visual studio.
In Mac, when working with Python, this helped me: instead of clicking on the "Run Code" option, click on "Run Python file", in the right corner.
For Ubuntu users this is solved by this solution:
File -> Preferences -> Setting -> Features -> Terminal -> Inherit Env
I found two vscode on my desktop, I opened the other one and it worked. Looks like I updated it but the older one didn't disappear.
If typing Ctrl+C can help to get out of this frozen state, that will be easier to do with VSCode 1.64 (Jan. 2022)
The terminal can type the answer for you.
Terminal -- Auto-reply
The terminal is now able to automatically reply when a specific sequences of characters is received.
A good example of where this is useful, which is also the only default case, is the Windows batch script message Terminate batch job (Y/N)? after hitting Ctrl+C when running a batch script.
This typically just ends up causing problems for the user.
The terminal will now automatically reply with Y and enter (\r) which makes Ctrl+C in Windows feel much better.
Pressing Ctrl+C will immediately reply to the question and return to the prompt:
Theme: Sapphire
The feature was made generically so you can setup custom replies for other thing, just be careful when doing this as you are sending text to the process automatically.
For example you could use it to automatically update Oh My Zsh when prompted:
"terminal.integrated.autoReplies": {
"[Oh My Zsh] Would you like to check for updates? [Y/n]": "Y\r"
}
If you use Clink and enable their similar feature, you can disable it in Clink or in VS Code by setting the reply to null to avoid the two features conflicting with each other:
"terminal.integrated.autoReplies": {
"Terminate batch job (Y/N)": null
}
Go to terminal, preferences, settings.
Check "run code in terminal"
Restart VS.
I changed from bash to powershell in terminal first but the command prompt still not shown.
Then I navigate to File -> Perferences -> Settings and it starts working (command prompt shown)
This seems to just be a display problem. It happened to me when I changed my display settings for desktop icon and app scaling settings.
I managed to fix the problem by simply restarting my computer and re-opening VS code
I had the same problem ... In my case just run vs-code as administrator and works
I have tried changing the settings for "terminal.integrated.shell.windows" to babun mintty location. But the babun shell window opens separately and doesn't integrate with the VS code. Anyone knows how to achieve this?
After trying for 2 hours finally made it work.
Before reading my way of doing this, you might want to got through this issue first.
By default babun is installed in C:\Users\13000\.babun\. So we can configure it by overriding user setting in VS Code as:
"terminal.integrated.shell.windows": "C:\\Users\\YOURUSERNAME\\.babun\\cygwin\\bin\\zsh.exe",
After saving , reload the window and you are done.
You will get something like :
Hope this helps!
I was searching for any solution for this issue before and I could not find any. But I was curious how Babun itself run the command "Open Babun here" from right-click menu and noticed it runs this command:
C:\Users\YOURUSER\.babun\cygwin\bin\mintty.exe /bin/env CHERE_INVOKING=1 /bin/zsh.exe
I've tried setting mintty.exe as shell and using leading commands as shell arguments, but this method opens an external terminal. I've noticed this behavior is because using mintty.exe, so I replaced mintty.exe with env.exe itself. At last, these are the settings:
"terminal.integrated.shell.windows": "C:\\Users\\YOURUSER\\.babun\\cygwin\\bin\\env.exe",
"terminal.integrated.shellArgs.windows": [
"CHERE_INVOKING=1",
"/bin/zsh.exe"
]
Edit: This might not completely relate to this question, but because of having the similarity, I think it might worth mentioning.
During my search for a solution, I've seen many other questions about the same issue for integrating Atom's PlatformIO IDE Terminal package or JetBrain's IDEs with Babun's zsh.
In the case of Atom, setting the Shell Override to C:\Users\YOURUSER\.babun\cygwin\bin\env.exe and Shell Arguments to CHERE_INVOKING=1 /bin/zsh.exe opens zsh.exe as an integrated terminal in the project directory.
In the case of JetBrain, I've used WebStrom and this works:
cmd.exe "/k C:\Users\ehsan\.babun\cygwin\bin\env.exe CHERE_INVOKING=1 /bin/zsh.exe"
Just complementing the correct answer that Pramesh Bajracharya gave above, you can override user settings in VS Code opening the VS Code and going in:
File->Preferences->Settings
And then paste in the field shown in your right side (WORKSPACE SETTINGS):
{
"terminal.integrated.shell.windows": "C:\\Users\\YOURUSER\\.babun\\cygwin\\bin\\zsh.exe"
}
More information can be found in https://code.visualstudio.com/docs/editor/integrated-terminal
Thanks Pramesh Bajracharya!