I created a DialogFlow app that works perfectly in my developer account.
But I need to test it as another user, so in my Google Action simulator, I added another test account as a OWNER to the project.
I verified this user has OWNER status in both the DialogFlow and Google Action UI.
They are able to edit both projects with full access.
However, when the test account tries to use the simulator it says:
Sorry, this action is not available for your app. Sorry, this action
is not available for your app. In the simulator, you are only able to
invoke actions that you have added to your app. For more information
on how to invoke your app, click here
https://developers.google.com/actions/discovery/explicit
This makes no sense to me:
I verified the test user has OWNER/ADMIN status on both DialogFlow and Google Actions for the project.
In DialogFlow, I verified the Google Assist is pointing to Default Welcome Intent as the default intent.
In Google Actions, I verified that the Default Welcome Intent is visible on the BUILD > ACTIONS UI.
As others suggested, I tried renaming the app several times with no luck.
I tried publishing an Alpha version, with still no luck.
My gut tells me it is some sort of permission/visibility problem, but I am completely stuck. Any ideas would be of great help.
EDIT:
THIS ISSUE HAS BEEN SOLVED. SEE COMMENT BELOW.
"I revisited my activity controls and noticed my "Web and App Activity" had a special clause due to organization permissions. I completely missed it due to the confusing UI. Posted a picture in the main thread. Thanks for reminding me to double check that area."
After you asked your company admin to enable this feature, it should be same as the image in below.
This error message is quite misleading. I have encountered this error a couple of times, and generally the problem was with one of the privacy settings in my Google account.
In this case you should go to https://myaccount.google.com/activitycontrols, confirm that you are logged in using your test account, and make sure the following are enabled:
Web & App Activity
Device Information
Voice & Audio Activity
I'm trying to make a login with Facebook available in my script. I've done everything, but when I attempt to login with a Facebook account I get this error from Facebook:
Error
App Not Setup: The developers of this app have not set up this app properly for Facebook Login.
Here's error screenshot:
Any ideas?
the problem was you have to set
Do you want to make this app and all its live features available to the general public?
set status and review to ON and problem solved
enjoy coding
With respect to the all the other answers, here's the screenshot to help someone.
Go to https://developers.facebook.com/
Click on the Apps menu on the top bar.
Select the respective app from the drop down.
The circle next to your app name is not fully green. When you hover mouse on it, you'll see a popup saying, "Not available to all users because your app is not live."
So next, you've to make it publicly available.
Click on setting at left panel. [see the screenshot below]
In Basic tab add your "Contact Email" (a valid email address - I've added the one which I'm using with developers.facebook.com) and make "Save changes".
Next click "App Review" at left panel. [see the screenshot below]
Look for this, Do you want to make this app and all its live features available to the general public? and Turn ON the switch next to this.
That's it! - App is now publicly available. See the fully green circle next to the app name.
Since the UI of the facebook has changed recently, here's the latest update for setting the sandbox mode ON/OFF :
Go to https://developers.facebook.com/
Click on the Apps menu on the top bar.
Select the respective app from the drop down.
Go to 'Status & Review' from the table in the left side of the page.
Do you want to make this app and all its live features available to the general public? - Select switch to set YES/NO value.
Update:
The YES/NO button will be disabled until and unless you provide your contact email.
Go to "Settings" in the left menu.
Update your Contact Email.
Hit the "Save" button at the bottom of the page.
Update:
'Status & Review' is replaced by 'App Review' now
If the app is still in private mode (Status and Review set to NO), then only Facebook users with role in the app can login.
That unless you set it to public (Status and Review set to YES).
To add more users to be able to login to a private app:
Go to https://developer.facebook.com
Go to Apps -> "Your app" -> Roles
Choose Add Administrator,Developer or Tester.
Many reasons including:
Sandbox mode is ON
Domain name is different
Site URL is different.
This error also occurs when you try to log in in your test version of the Facebook app and you have not added the user you are trying to test the log in with in the Roles -> Testers section.
To fix it, just add the email address of the Facebook account you are trying to log in with in the section above.
Finally, make sure the user you added accepts the request sent before you try to test otherwise the log in process will fail in the second screen just after the user accept the conditions.
Make Sure in left panel App review tab selected (Your app is currently live and available to the public.) tab is ON and App status is GREEN
Happy Programming
And addition to all these beautifull comments dont forget to Start A Submission
There are a bunch of possible things which could trigger this error:
In your case, you just need to add your facebook account into either tester, developer or admin of your facebook app as you want to use that account to test.
But if you see the error upon clicking connect to facebook(before you have chance to enter facebook credentials), then it means your current facebook account detected from cookie is not a valid tester/developer/admin account for your app.
Your could either add your account in or just hit facebook.com and sign out(to remove the undesired cookie).
I had the same problem but now here is how I solved it
Go to https://developers.facebook.com/
• Click on the Apps menu on the top bar.
• Select the respective app from the drop down.
• Click Settings from the table in the left side of the page
• Then under the Contact Email type in your email you would like to use
• Then click save settings button
• Go to 'Status & Review' from the table in the left side of the page.
• Do you want to make this app and all its live features available to the general public? - Select switch to set YES/NO value.
For other users that run into this issue, the app I was testing against was a test version of our production app and didn't have the option to turn status and review to ON as others have mentioned here.
The fix was to create a new app which is not a test app, and configure it like the production version. The non-test version allows the option to turn status and review to ON.
My specific use was testing a user registered with a phone number instead of an email address. I tried adding that user into different roles of our test app (Developer and Tester), but to no avail. My guess is it has something to do with the user not having an email associated with it.
Here's more info on test apps: https://developers.facebook.com/docs/apps/test-apps
Hemang's answer was right, BUT, there's one extra step you'll need, which is to add a Facebook App ID. (I discovered I was missing this part):
Once you've done that in addition to Hemang's answer, you'll be good to go!
Okay - sandbox is off, domain has to be correct because 99% of the users can reach the app, and "all its live features available to the general public" is set to yes.
Now, You need to add a "Privacy Policy URL" in the App Details tab (developers.facebook.com).
This is a new Policy of Facebook.
This resolved my issue if you do not want to make the app available to the public (keeping Status & Review on NO)
I had to sign out of the previous account on the Facebook App and also remove the Facebook account in Settings. Removing just from the Settings will not remove the error because the App itself still has the previous account logged in.
If you have set your Roles as Administrator/Developer/Tester, you can put in that account login info in and it should work then.
do setup by following bellow link and domain name you need to mention as like wht you have mentioned in facebook app domain name.
Go to https://developers.facebook.com/
Click on the Apps menu on the top bar.
This is because you didn't make your Facebook app live. For this go to:
Facebook developer page->Select your app->you will see top of the right your live option is disable and click to enable it->It will refer to you in "basic setting section"->You have to add "privacy policy url" and "Terms and services url" also you may select app category->then save the setting.
Note: You can use any blogspot or website to make your privacy policy also terms and condition page.Both I gave same url which worked.
after a lot of tries, I've read in other topics which someone said "delete all your apps and create it again". I did that but, as you can imagine, a new App will create a new Application ID on Facebook's page.
So, even after all the "set public things" it didn't work because the application ID was wrong in my code due to the creation of a new App on Facebook developer page.
So, as AndrewSmiley said above, you should remeber to update that in your app #strings
Set LoginBehavior if you have installed facebook app in your phone
loginButton.setLoginBehavior(LoginBehavior.WEB_ONLY);
99% sure my app is set up correctly, it requests the publish_actions permission and I can publish the action using the Open Test user as it states I must do, however when I go to review status my submit link isn't active and it just tells me I need to publish the action using the test user......which i've done. Going around in circles here, what am I missing? Or can anyone recommend a decent guide I can follow as the docs aren't helping me too much.
Now, I am going to submit my app for approving. The problem is that, when the first time logging the app, you have to enter a verification code provided by me (by email or oral to my target user). So how can I give the code for approving.
May be I could set a default verification code programmatically, but when the app is approved , I have to update the app to disable the default verification code and this lead to another approve process.
So, can someone give me some advice to solve this problem?
When you're in iTunesConnect preparing to submit your app there's a box for review notes (Source, page 49), where you can put a verification code for the reviewers to use.
iTunes Connect provides an area for Review Notes. The app tester will look at this and use it during review.
Simply put the verification code and any other information inside that area. they WILL read it.
I hope someone can help. I have registered for a developer account and have verified my mobile number and card details. But every time I go into http://developers.facebook.com/apps (as i intend to to create a new app) it takes me back to my Facebook page. Even if I select it from search box, it does not seem to come with a 'request for permission'
What do I need to do?
You need to create the app with your personal user - not your pages user.