I have a table with a datemultirange type.
I want to combine (compute the union) of multiple rows.
SELECT
type_id,
range_agg(some_date_ranges)
FROM foo
GROUP BY type_id
My table foo looks something like this:
id (int)
some_date_ranges(datemultirange)
type_id (int)
1
{[2016-07-02,2016-07-24),[2017-10-05,2017-10-12),[2018-05-23,2021-03-08)}
4
2
{[2016-07-03,2016-07-24),[2017-10-03,2017-10-13),[2018-05-23,2021-04-08)}
4
2
{[2016-07-27,2016-07-28),[2017-10-02,2017-10-14),[2018-05-23,2021-05-08)}
5
If I try to run the function above, I get the error function range_agg(datemultirange) does not exist. Similar with the function aggregate_union.
The only solution I've found so far is with a CTE that uses unnest and then using range_agg after that. But it's inelegant. Is there a better way?
Details
Postgres 14
In Postgres 14 as simple as I could get it is something like:
create table multi_range_test(date_mr datemultirange);
insert into
multi_range_test
values
('{[2016-07-02,2016-07-24),[2017-10-05,2017-10-12), [2018-05-23,2021-03-08)}'::datemultirange),
('{[2016-07-03,2016-07-24),[2017-10-03,2017-10-13),[2018-05-23,2021-04-08)}'::datemultirange) ,
('{[2016-07-27,2016-07-28),[2017-10-02,2017-10-14),[2018-05-23,2021-05-08)}'::datemultirange);
select range_agg(mr) from (select unnest(date_mr) from multi_range_test) as t(mr) ;
range_agg
---------------------------------------------------------------------------------------------------
{[07/02/2016,07/24/2016),[07/27/2016,07/28/2016),[10/02/2017,10/14/2017),[05/23/2018,05/08/2021)}
Compared to range_agg(anymultirange) in Postgres 15:
select range_agg(date_mr) from multi_range_test ;
range_agg
---------------------------------------------------------------------------------------------------
{[07/02/2016,07/24/2016),[07/27/2016,07/28/2016),[10/02/2017,10/14/2017),[05/23/2018,05/08/2021)}
Related
Does any one know how to create crosstab queries in PostgreSQL?
For example I have the following table:
Section Status Count
A Active 1
A Inactive 2
B Active 4
B Inactive 5
I would like the query to return the following crosstab:
Section Active Inactive
A 1 2
B 4 5
Is this possible?
Install the additional module tablefunc once per database, which provides the function crosstab(). Since Postgres 9.1 you can use CREATE EXTENSION for that:
CREATE EXTENSION IF NOT EXISTS tablefunc;
Improved test case
CREATE TABLE tbl (
section text
, status text
, ct integer -- "count" is a reserved word in standard SQL
);
INSERT INTO tbl VALUES
('A', 'Active', 1), ('A', 'Inactive', 2)
, ('B', 'Active', 4), ('B', 'Inactive', 5)
, ('C', 'Inactive', 7); -- ('C', 'Active') is missing
Simple form - not fit for missing attributes
crosstab(text) with 1 input parameter:
SELECT *
FROM crosstab(
'SELECT section, status, ct
FROM tbl
ORDER BY 1,2' -- needs to be "ORDER BY 1,2" here
) AS ct ("Section" text, "Active" int, "Inactive" int);
Returns:
Section | Active | Inactive
---------+--------+----------
A | 1 | 2
B | 4 | 5
C | 7 | -- !!
No need for casting and renaming.
Note the incorrect result for C: the value 7 is filled in for the first column. Sometimes, this behavior is desirable, but not for this use case.
The simple form is also limited to exactly three columns in the provided input query: row_name, category, value. There is no room for extra columns like in the 2-parameter alternative below.
Safe form
crosstab(text, text) with 2 input parameters:
SELECT *
FROM crosstab(
'SELECT section, status, ct
FROM tbl
ORDER BY 1,2' -- could also just be "ORDER BY 1" here
, $$VALUES ('Active'::text), ('Inactive')$$
) AS ct ("Section" text, "Active" int, "Inactive" int);
Returns:
Section | Active | Inactive
---------+--------+----------
A | 1 | 2
B | 4 | 5
C | | 7 -- !!
Note the correct result for C.
The second parameter can be any query that returns one row per attribute matching the order of the column definition at the end. Often you will want to query distinct attributes from the underlying table like this:
'SELECT DISTINCT attribute FROM tbl ORDER BY 1'
That's in the manual.
Since you have to spell out all columns in a column definition list anyway (except for pre-defined crosstabN() variants), it is typically more efficient to provide a short list in a VALUES expression like demonstrated:
$$VALUES ('Active'::text), ('Inactive')$$)
Or (not in the manual):
$$SELECT unnest('{Active,Inactive}'::text[])$$ -- short syntax for long lists
I used dollar quoting to make quoting easier.
You can even output columns with different data types with crosstab(text, text) - as long as the text representation of the value column is valid input for the target type. This way you might have attributes of different kind and output text, date, numeric etc. for respective attributes. There is a code example at the end of the chapter crosstab(text, text) in the manual.
db<>fiddle here
Effect of excess input rows
Excess input rows are handled differently - duplicate rows for the same ("row_name", "category") combination - (section, status) in the above example.
The 1-parameter form fills in available value columns from left to right. Excess values are discarded.
Earlier input rows win.
The 2-parameter form assigns each input value to its dedicated column, overwriting any previous assignment.
Later input rows win.
Typically, you don't have duplicates to begin with. But if you do, carefully adjust the sort order to your requirements - and document what's happening.
Or get fast arbitrary results if you don't care. Just be aware of the effect.
Advanced examples
Pivot on Multiple Columns using Tablefunc - also demonstrating mentioned "extra columns"
Dynamic alternative to pivot with CASE and GROUP BY
\crosstabview in psql
Postgres 9.6 added this meta-command to its default interactive terminal psql. You can run the query you would use as first crosstab() parameter and feed it to \crosstabview (immediately or in the next step). Like:
db=> SELECT section, status, ct FROM tbl \crosstabview
Similar result as above, but it's a representation feature on the client side exclusively. Input rows are treated slightly differently, hence ORDER BY is not required. Details for \crosstabview in the manual. There are more code examples at the bottom of that page.
Related answer on dba.SE by Daniel Vérité (the author of the psql feature):
How do I generate a pivoted CROSS JOIN where the resulting table definition is unknown?
SELECT section,
SUM(CASE status WHEN 'Active' THEN count ELSE 0 END) AS active, --here you pivot each status value as a separate column explicitly
SUM(CASE status WHEN 'Inactive' THEN count ELSE 0 END) AS inactive --here you pivot each status value as a separate column explicitly
FROM t
GROUP BY section
You can use the crosstab() function of the additional module tablefunc - which you have to install once per database. Since PostgreSQL 9.1 you can use CREATE EXTENSION for that:
CREATE EXTENSION tablefunc;
In your case, I believe it would look something like this:
CREATE TABLE t (Section CHAR(1), Status VARCHAR(10), Count integer);
INSERT INTO t VALUES ('A', 'Active', 1);
INSERT INTO t VALUES ('A', 'Inactive', 2);
INSERT INTO t VALUES ('B', 'Active', 4);
INSERT INTO t VALUES ('B', 'Inactive', 5);
SELECT row_name AS Section,
category_1::integer AS Active,
category_2::integer AS Inactive
FROM crosstab('select section::text, status, count::text from t',2)
AS ct (row_name text, category_1 text, category_2 text);
DB Fiddle here:
Everything works: https://dbfiddle.uk/iKCW9Uhh
Without CREATE EXTENSION tablefunc; you get this error: https://dbfiddle.uk/j8W1CMvI
ERROR: function crosstab(unknown, integer) does not exist
LINE 4: FROM crosstab('select section::text, status, count::text fro...
^
HINT: No function matches the given name and argument types. You might need to add explicit type casts.
Solution with JSON aggregation:
CREATE TEMP TABLE t (
section text
, status text
, ct integer -- don't use "count" as column name.
);
INSERT INTO t VALUES
('A', 'Active', 1), ('A', 'Inactive', 2)
, ('B', 'Active', 4), ('B', 'Inactive', 5)
, ('C', 'Inactive', 7);
SELECT section,
(obj ->> 'Active')::int AS active,
(obj ->> 'Inactive')::int AS inactive
FROM (SELECT section, json_object_agg(status,ct) AS obj
FROM t
GROUP BY section
)X
Sorry this isn't complete because I can't test it here, but it may get you off in the right direction. I'm translating from something I use that makes a similar query:
select mt.section, mt1.count as Active, mt2.count as Inactive
from mytable mt
left join (select section, count from mytable where status='Active')mt1
on mt.section = mt1.section
left join (select section, count from mytable where status='Inactive')mt2
on mt.section = mt2.section
group by mt.section,
mt1.count,
mt2.count
order by mt.section asc;
The code I'm working from is:
select m.typeID, m1.highBid, m2.lowAsk, m1.highBid - m2.lowAsk as diff, 100*(m1.highBid - m2.lowAsk)/m2.lowAsk as diffPercent
from mktTrades m
left join (select typeID,MAX(price) as highBid from mktTrades where bid=1 group by typeID)m1
on m.typeID = m1.typeID
left join (select typeID,MIN(price) as lowAsk from mktTrades where bid=0 group by typeID)m2
on m1.typeID = m2.typeID
group by m.typeID,
m1.highBid,
m2.lowAsk
order by diffPercent desc;
which will return a typeID, the highest price bid and the lowest price asked and the difference between the two (a positive difference would mean something could be bought for less than it can be sold).
There's a different dynamic method that I've devised, one that employs a dynamic rec. type (a temp table, built via an anonymous procedure) & JSON. This may be useful for an end-user who can't install the tablefunc/crosstab extension, but can still create temp tables or run anon. proc's.
The example assumes all the xtab columns are the same type (INTEGER), but the # of columns is data-driven & variadic. That said, JSON aggregate functions do allow for mixed data types, so there's potential for innovation via the use of embedded composite (mixed) types.
The real meat of it can be reduced down to one step if you want to statically define the rec. type inside the JSON recordset function (via nested SELECTs that emit a composite type).
dbfiddle.uk
https://dbfiddle.uk/N1EzugHk
Crosstab function is available under the tablefunc extension. You'll have to create this extension one time for the database.
CREATE EXTENSION tablefunc;
You can use the below code to create pivot table using cross tab:
create table test_Crosstab( section text,
status text,
count numeric)
insert into test_Crosstab values ( 'A','Active',1)
,( 'A','Inactive',2)
,( 'B','Active',4)
,( 'B','Inactive',5)
select * from crosstab(
'select section
,status
,count
from test_crosstab'
)as ctab ("Section" text,"Active" numeric,"Inactive" numeric)
Does any one know how to create crosstab queries in PostgreSQL?
For example I have the following table:
Section Status Count
A Active 1
A Inactive 2
B Active 4
B Inactive 5
I would like the query to return the following crosstab:
Section Active Inactive
A 1 2
B 4 5
Is this possible?
Install the additional module tablefunc once per database, which provides the function crosstab(). Since Postgres 9.1 you can use CREATE EXTENSION for that:
CREATE EXTENSION IF NOT EXISTS tablefunc;
Improved test case
CREATE TABLE tbl (
section text
, status text
, ct integer -- "count" is a reserved word in standard SQL
);
INSERT INTO tbl VALUES
('A', 'Active', 1), ('A', 'Inactive', 2)
, ('B', 'Active', 4), ('B', 'Inactive', 5)
, ('C', 'Inactive', 7); -- ('C', 'Active') is missing
Simple form - not fit for missing attributes
crosstab(text) with 1 input parameter:
SELECT *
FROM crosstab(
'SELECT section, status, ct
FROM tbl
ORDER BY 1,2' -- needs to be "ORDER BY 1,2" here
) AS ct ("Section" text, "Active" int, "Inactive" int);
Returns:
Section | Active | Inactive
---------+--------+----------
A | 1 | 2
B | 4 | 5
C | 7 | -- !!
No need for casting and renaming.
Note the incorrect result for C: the value 7 is filled in for the first column. Sometimes, this behavior is desirable, but not for this use case.
The simple form is also limited to exactly three columns in the provided input query: row_name, category, value. There is no room for extra columns like in the 2-parameter alternative below.
Safe form
crosstab(text, text) with 2 input parameters:
SELECT *
FROM crosstab(
'SELECT section, status, ct
FROM tbl
ORDER BY 1,2' -- could also just be "ORDER BY 1" here
, $$VALUES ('Active'::text), ('Inactive')$$
) AS ct ("Section" text, "Active" int, "Inactive" int);
Returns:
Section | Active | Inactive
---------+--------+----------
A | 1 | 2
B | 4 | 5
C | | 7 -- !!
Note the correct result for C.
The second parameter can be any query that returns one row per attribute matching the order of the column definition at the end. Often you will want to query distinct attributes from the underlying table like this:
'SELECT DISTINCT attribute FROM tbl ORDER BY 1'
That's in the manual.
Since you have to spell out all columns in a column definition list anyway (except for pre-defined crosstabN() variants), it is typically more efficient to provide a short list in a VALUES expression like demonstrated:
$$VALUES ('Active'::text), ('Inactive')$$)
Or (not in the manual):
$$SELECT unnest('{Active,Inactive}'::text[])$$ -- short syntax for long lists
I used dollar quoting to make quoting easier.
You can even output columns with different data types with crosstab(text, text) - as long as the text representation of the value column is valid input for the target type. This way you might have attributes of different kind and output text, date, numeric etc. for respective attributes. There is a code example at the end of the chapter crosstab(text, text) in the manual.
db<>fiddle here
Effect of excess input rows
Excess input rows are handled differently - duplicate rows for the same ("row_name", "category") combination - (section, status) in the above example.
The 1-parameter form fills in available value columns from left to right. Excess values are discarded.
Earlier input rows win.
The 2-parameter form assigns each input value to its dedicated column, overwriting any previous assignment.
Later input rows win.
Typically, you don't have duplicates to begin with. But if you do, carefully adjust the sort order to your requirements - and document what's happening.
Or get fast arbitrary results if you don't care. Just be aware of the effect.
Advanced examples
Pivot on Multiple Columns using Tablefunc - also demonstrating mentioned "extra columns"
Dynamic alternative to pivot with CASE and GROUP BY
\crosstabview in psql
Postgres 9.6 added this meta-command to its default interactive terminal psql. You can run the query you would use as first crosstab() parameter and feed it to \crosstabview (immediately or in the next step). Like:
db=> SELECT section, status, ct FROM tbl \crosstabview
Similar result as above, but it's a representation feature on the client side exclusively. Input rows are treated slightly differently, hence ORDER BY is not required. Details for \crosstabview in the manual. There are more code examples at the bottom of that page.
Related answer on dba.SE by Daniel Vérité (the author of the psql feature):
How do I generate a pivoted CROSS JOIN where the resulting table definition is unknown?
SELECT section,
SUM(CASE status WHEN 'Active' THEN count ELSE 0 END) AS active, --here you pivot each status value as a separate column explicitly
SUM(CASE status WHEN 'Inactive' THEN count ELSE 0 END) AS inactive --here you pivot each status value as a separate column explicitly
FROM t
GROUP BY section
You can use the crosstab() function of the additional module tablefunc - which you have to install once per database. Since PostgreSQL 9.1 you can use CREATE EXTENSION for that:
CREATE EXTENSION tablefunc;
In your case, I believe it would look something like this:
CREATE TABLE t (Section CHAR(1), Status VARCHAR(10), Count integer);
INSERT INTO t VALUES ('A', 'Active', 1);
INSERT INTO t VALUES ('A', 'Inactive', 2);
INSERT INTO t VALUES ('B', 'Active', 4);
INSERT INTO t VALUES ('B', 'Inactive', 5);
SELECT row_name AS Section,
category_1::integer AS Active,
category_2::integer AS Inactive
FROM crosstab('select section::text, status, count::text from t',2)
AS ct (row_name text, category_1 text, category_2 text);
DB Fiddle here:
Everything works: https://dbfiddle.uk/iKCW9Uhh
Without CREATE EXTENSION tablefunc; you get this error: https://dbfiddle.uk/j8W1CMvI
ERROR: function crosstab(unknown, integer) does not exist
LINE 4: FROM crosstab('select section::text, status, count::text fro...
^
HINT: No function matches the given name and argument types. You might need to add explicit type casts.
Solution with JSON aggregation:
CREATE TEMP TABLE t (
section text
, status text
, ct integer -- don't use "count" as column name.
);
INSERT INTO t VALUES
('A', 'Active', 1), ('A', 'Inactive', 2)
, ('B', 'Active', 4), ('B', 'Inactive', 5)
, ('C', 'Inactive', 7);
SELECT section,
(obj ->> 'Active')::int AS active,
(obj ->> 'Inactive')::int AS inactive
FROM (SELECT section, json_object_agg(status,ct) AS obj
FROM t
GROUP BY section
)X
Sorry this isn't complete because I can't test it here, but it may get you off in the right direction. I'm translating from something I use that makes a similar query:
select mt.section, mt1.count as Active, mt2.count as Inactive
from mytable mt
left join (select section, count from mytable where status='Active')mt1
on mt.section = mt1.section
left join (select section, count from mytable where status='Inactive')mt2
on mt.section = mt2.section
group by mt.section,
mt1.count,
mt2.count
order by mt.section asc;
The code I'm working from is:
select m.typeID, m1.highBid, m2.lowAsk, m1.highBid - m2.lowAsk as diff, 100*(m1.highBid - m2.lowAsk)/m2.lowAsk as diffPercent
from mktTrades m
left join (select typeID,MAX(price) as highBid from mktTrades where bid=1 group by typeID)m1
on m.typeID = m1.typeID
left join (select typeID,MIN(price) as lowAsk from mktTrades where bid=0 group by typeID)m2
on m1.typeID = m2.typeID
group by m.typeID,
m1.highBid,
m2.lowAsk
order by diffPercent desc;
which will return a typeID, the highest price bid and the lowest price asked and the difference between the two (a positive difference would mean something could be bought for less than it can be sold).
There's a different dynamic method that I've devised, one that employs a dynamic rec. type (a temp table, built via an anonymous procedure) & JSON. This may be useful for an end-user who can't install the tablefunc/crosstab extension, but can still create temp tables or run anon. proc's.
The example assumes all the xtab columns are the same type (INTEGER), but the # of columns is data-driven & variadic. That said, JSON aggregate functions do allow for mixed data types, so there's potential for innovation via the use of embedded composite (mixed) types.
The real meat of it can be reduced down to one step if you want to statically define the rec. type inside the JSON recordset function (via nested SELECTs that emit a composite type).
dbfiddle.uk
https://dbfiddle.uk/N1EzugHk
Crosstab function is available under the tablefunc extension. You'll have to create this extension one time for the database.
CREATE EXTENSION tablefunc;
You can use the below code to create pivot table using cross tab:
create table test_Crosstab( section text,
status text,
count numeric)
insert into test_Crosstab values ( 'A','Active',1)
,( 'A','Inactive',2)
,( 'B','Active',4)
,( 'B','Inactive',5)
select * from crosstab(
'select section
,status
,count
from test_crosstab'
)as ctab ("Section" text,"Active" numeric,"Inactive" numeric)
Here is the query I have built to derive tech number. I can't get it to work. I get this error message:
Subquery returned more than 1 value.
The query:
declare #TechNum int =
(Select Case When CF_Technician='David' Then 9 When
CF_Technician='David N' Then 9 When
CF_Technician='David Nunez' Then 9 When
CF_Technician='Joe Nicholson' Then 8 When
CF_Technician='Joe Nicholson' Then 8 When
CF_Technician='Josh Fogleman' Then 7 When
else 0
End
From OptimazationItems)
Select
ItemID,
TechNum=#TechNum
From
OptimazationItems
What is wrong? Why can't I use a variable in the select statement? What is the best way to accomplish this?
I know I can create another view and join it afterwards. Is there a way to do it in one query?
You can use a variable, but you have assign to it a subquery that returns at most one row. The subquery you assign obviously returns more than one row. Run the subquery in isolation, you'll see that it returns more than one row.
Rewrite the subquery to only return (at most) one row. You'll probably want to add a WHERE clause or a SELECT TOP 1 + ORDER BY some_column to select a specific row.
It looks from the comments that you didn't understand what I was saying. What you probably meant to write is the following.
SELECT
ItemID,
TechNum=CASE CF_Technician
WHEN 'David' THEN 9
WHEN 'David N' THEN 9
WHEN 'David Nunez' THEN 9
WHEN 'Joe Nicholson' THEN 8
WHEN 'Joe Nicholson' THEN 8
WHEN 'Josh Fogleman' THEN 7
ELSE 0
END
FROM
OptimazationItems
You cannot write this select statement using a variable.
I have a table as shown below with three columns.
Table: geomet
create table geomet
(
cola float,
colb float,
geopath geometry
);
Insertion of records:
insert into geomet values('12.32232442','43.2324535',point(12.32232442,43.2324535)::geometry);
I have this:
select * from geomet;
cola colb geopath
---------------------------------------------------------------------
12.32232442 43.2324535 01010000004F34D5B407A528409D2B4A09C19D4540
Note: I need to find the Intersect of column geopath in my table as shown above. I have also installed PostGIS.
So I have tried this:
Try 1:
SELECT ST_Intersects(geopath) from geomet;
Got an error:
ERROR: function st_intersects(geometry) does not exist
Try 2:
SELECT ST_Intersects(cola,colb) from geomet;
Got an error:
ERROR: function st_intersects(double precision, double precision) does not exist
ST_Intersects requires two geometries or two geometry fields, as you are checking for the intersection between one geometry and another or one set and another set.
SELECT ST_Intersects(geomA, geomB) FROM some_table;
or
SELECT a.id., b.id, ST_Intersects(a.geom, b.geom)
FROM table a, table b
WHERE a.id > b.id;
will give you all the pairwise intersection between two tables. Obviously, you can use ST_Intersects in a where clause in a similar fashion, to only return rows where the records from two different tables intersect.
I'm using oracle database and facing a problem where two id_poduct.nextval is creating as error: ORA-00001: unique constraint (SYSTEM.SYS_C004166) violated
It is a primary key. To use all is a requirement. Can I use 2 .nextval in a statement?
insert all
into sale_product values (id_product.nextval, id.currval, 'hello', 123, 1)
into sale_product values (id_product.nextval, id.currval, 'hi', 123, 1)
select * from dual;
insert into sale_product
select id_product.nextval, id.currval, a, b, c
from
(
select 'hello' a, 123 b, 1 c from dual union all
select 'hi' a, 123 b, 1 c from dual
);
This doesn't use the insert all syntax, but it works the same way if you are only inserting into the same table.
The value of id_product.NEXTVAL in the first INSERT is the same as the second INSERT, hence you'll get the unique constraint violation. if you remove the constraint and perform the insert, you'll notice the duplicate values!
The only way is to perform two bulk INSERTS in sequence or to have two seperate sequences with a different range, the latter would require an awful lot of coding and checking.
create table temp(id number ,id2 number);
insert all
into temp values (supplier_seq.nextval, supplier_seq.currval)
into temp values (supplier_seq.nextval, supplier_seq.currval)
select * from dual;
ID ID2
---------- ----------
2 2
2 2
Refrence
The subquery of the multitable insert statement cannot use a sequence
http://docs.oracle.com/cd/B19306_01/server.102/b14200/statements_9014.htm#i2080134