I'm trying to include multiple files server wide, so in etc/php.ini I have a few lines:
;Blowfish password
auto_prepend_file="/plugins/phpass-0.3/PasswordHash.php"
;WhoIs lookup
auto_prepend_file="/plugins/phpwhois-4.2.2/whois.main.php"
;IP database
;auto_prepend_file="/plugins/GeoIP/geoip.inc"
auto_prepend_file="/plugins/GeoIP/geoipcity.inc"
It would appear that only the last auto_prepend_file is being accepted, or it's overwriting the others.
How can I include multiple files?
Create a separate loader file that require's the files you need, then prepend that file.
auto_prepend_file="/path/to/loader.php"
And in in loader.php:
require '/plugins/phpass-0.3/PasswordHash.php';
require '/plugins/phpwhois-4.2.2/whois.main.php';
require '/plugins/GeoIP/geoipcity.inc';
Related
I want to configure mplayer to look for an edl when playing a video. Specifically, I want it to use "show.edl" when playing "show.mp4", assuming both are in the same directory. Very similar to how it looks for subtitles.
I can add a default edl in the config file by adding the following:
edl=default.edl
And this will look for the file "default.edl" IN THE CURRENT DIRECTORY, rather than in the directory where the media file is. And it isn't named after the media file either, and thus even if it did look in the right place, I'd have one single edl file for every media file in that directory.
Not really what I wanted.
So, is there a way, in the "~/.mplayer/config" file, to specify the edl relative to the input file name?
Mplayer's config file format doesn't seem to support any sort of replacement syntax. So there's no way to do this?
MPlayer does not have a native method to specify strings in the config file relative to the input file name. So there's no native way to deal with this.
There's a variety of approaches you could use to get around that. Writing a wrapper around mplayer to parse out the input file and add an "-edl=" parameter is fairly general, but will fail on playlists, and I'm sure lots of other edge cases. The most general solution would of course be to add the functionality to mplayer's config parser (m_parse.c, iirc.)
The simplest, though, is to (ab)use media-specific configuration files.
pros:
Doesn't require recompiling mplayer!
Well defined and limited failure modes. I.E. the ways it fails and when it fails are easily understood, and there aren't hidden "oops, didn't expect that" behaviors hidden anywhere.
Construction and updating of the edl files is easily automated.
cons:
Fails if you move the media around, as the config files need to full path to the edl file to function correctly.
Requires you have a ".conf" file as well as an EDL file, which adds clutter to the file system.
Malicious config files in the media directory may be a security issue. (Though if you're allowing general upload of media files, you probably have bigger problems. mplayer is not at all a security-hardened codebase, nor generally are the codecs it uses.)
To make this work:
Add "use-filedir-conf=yes" to "/etc/mplayer.conf" or "~/.mplayer/config". This is required, as looking in the media directory for config files is turned off by default,
For each file "clip.mp4" which has an edl "clip.edl" in the same directory, create a file "clip.mp4.conf" which contains the single line "edl=/path/to/clip.edl". The complete path is required.
Enjoy!
Automatic creation and updating of the media-specific .conf files is left as an exercise for the student.
In the documentation of pythonforandroid, at https://python-for-android.readthedocs.io/en/latest/buildoptions/, there is a build option described called blacklist.
--blacklist: The path to a file containing blacklisted patterns that will be excluded from the final APK. Defaults to ./blacklist.txt
However, not a word can be found anywhere about how to use this file and what exactly the patterns are supposed to represent. For instance, is this used to exclude libraries, files, or directories? Do the patterns match file names or contents? What is the syntax of the patterns, or an example of a valid blacklist.txt file?
This file should contain a list of glob patterns, i.e. as implemented by fnmatch, one per line. These patterns are compared against the full filepath of each file in your source dir, probably using a global filepath but I'm not certain about that (it might be relative to the source dir).
For instance, the file could contain the following lines:
*.txt
*/test.jpg
This would prevent all files ending with .txt from being included in the apk, and all files named test.jpg in any subfolder.
If using buildozer, the android.blacklist_src buildozer.spec option can be used to point to your choice of blacklist file.
Unix File Associations is a welcome new feature in install4j 8.
I'm trying to register multiple file extensions as file associations with the same mime-type with the install4j 8.0.1 Unix Shell Installer.
The "Create a File Association" action only seems to accept one file extension so I initially tried adding multiple of these actions with a different extension but the same mime-type. This seems valid, but when it translates into the actual installation of the application it appears that the mime-info XML files being made are named with the same mime-type and so all but one get overwritten. This leads to only one file extension being associated with the mime-type.
I've also tried various separators (space, comma, semi-colon) in the file extension field, but this just ends up as a single unlikely looking extension in the mime-info XML file!
(e.g.
<glob pattern="*.ext1,ext2" weight="60"/>
)
The mime-info XML format allows multiple <glob> elements, so the mime-info XML file could contain, e.g.
<glob pattern=".ext1" weight="60"/>
<glob pattern=".ext2" weight="60"/>
but I can't see a way to get to this from install4j8.
Is there a way?
As of 8.0.1, this is indeed not possible. In 8.0.2, you will be able to specify multiple extensions separated by commas. Please contact support#ej-technologies.com to get a build where this is already implemented.
I have temporary files created in separate folders inside my source tree which I would like to ignore. Something like:
project/
|--component/
|--.jazzignore
|--file.src
|--file-9df29e29373e66caef72/
|--file.src.tmp
I already ignore file.src.tmp by extension using .jazzignore, but I would also like to ignore the file-9df29e29373e66caef72/. The folder looks empty in the "Unresolved" category for the component, but since its name changes over time, I cannot ignore it by name.
since its name changes over time, I cannot ignore it by name.
Still, if you know its naming convention, you might consider an ignore pattern:
core.ignore= \
file-*
Note it is non-recursive, you that would ignore any file, folder or symlink named file-... anywhere under component.
Here, that would ignore only file-... directly under component.
Eclipse workspaces often include files or folders, such as compiler output, log files, and so on, that you do not want to place under source control.
You can specify resources or classes of resources to be ignored by Rational Team Concert™ source control. Ignored resources are never checked in.
A .jazzignore file is used to prevent items from being checked into change sets.
A .jazzignore file consists of a series of patterns. Any file, folder, or symbolic link whose name matches a pattern cannot be committed to a change set.
There are two types of patterns in a .jazzignore file:
core.ignore patterns, that are effective in the same directory as the ignore file; and
core.ignore.recursive patterns that affect items in all of the directories below the .jazzignore file.
My job has following steps:
- Connect to ftp location
- Download compressed files
- Uncompress files to different folder
- Delete compressed files
- Write file names to a tracking file
ftpConnection -OnComponentOk--> ftpList-Iterate--> ftpGet -Iterate--> fileList-Iterate--> fileUnarchive-Iterate--> fileDelete
Question is where can i write the uncompressed filenames to the tracking file. When i try to Iterate from fileUnarchive to fileOutputDelimited it does not
allow me, similarly if i want to add a map from fileDelete it does not allow me. Do i need a map or can i make use of the global variable somehow?
One way i can do it getting it after ftpGet but i would prefer to do it at a latter stage (after unarchiving or deletion) so i don't update the file if the
process fails at one of these steps.
Thanks.
try with tfiledelete-->oncomponentok-->tfixedflowinput(here you can use the same global variable which contains current file name from tfilelist)-->(mainflow)-=->tfileoutputdelimeted...