Related
My original query was like this:
SELECT *,
(SELECT COUNT(*), user_id FROM user_sessions WHERE company_id=companies.id GROUP BY user_id) as user_sessions
FROM companies
Which comes back with this error:
error: more than one row returned by a subquery used as an expression
I found a way past that error with this:
SELECT *,
ARRAY (SELECT COUNT(*), user_id FROM user_sessions WHERE company_id=companies.id GROUP BY user_id) as user_sessions
FROM companies
But then it has this error:
error: subquery must return only one column
If I remove either COUNT(*) or user_id from the returned columns it works, however I need both sets of data. How do I return more than one column in a sub-query like this?
I guess a join should do the trick:
select * from
companies
join
( select count(*), company_id, user_id
from user_sessions
group by (company_id, user_id)
) as user_sessions
on companies.id = company_id
For anyone who runs into this in the future, tested the best way to dot this is what #Matt mentioned in the comments above:
Replace COUNT(*), user_id with ARRAY[COUNT(*), user_id]
Works perfectly
Want to improve this post? Provide detailed answers to this question, including citations and an explanation of why your answer is correct. Answers without enough detail may be edited or deleted.
This question already has answers here:
Retrieving the last record in each group - MySQL
(33 answers)
Closed 3 years ago.
I have this table for documents (simplified version here):
id
rev
content
1
1
...
2
1
...
1
2
...
1
3
...
How do I select one row per id and only the greatest rev?
With the above data, the result should contain two rows: [1, 3, ...] and [2, 1, ..]. I'm using MySQL.
Currently I use checks in the while loop to detect and over-write old revs from the resultset. But is this the only method to achieve the result? Isn't there a SQL solution?
At first glance...
All you need is a GROUP BY clause with the MAX aggregate function:
SELECT id, MAX(rev)
FROM YourTable
GROUP BY id
It's never that simple, is it?
I just noticed you need the content column as well.
This is a very common question in SQL: find the whole data for the row with some max value in a column per some group identifier. I heard that a lot during my career. Actually, it was one the questions I answered in my current job's technical interview.
It is, actually, so common that Stack Overflow community has created a single tag just to deal with questions like that: greatest-n-per-group.
Basically, you have two approaches to solve that problem:
Joining with simple group-identifier, max-value-in-group Sub-query
In this approach, you first find the group-identifier, max-value-in-group (already solved above) in a sub-query. Then you join your table to the sub-query with equality on both group-identifier and max-value-in-group:
SELECT a.id, a.rev, a.contents
FROM YourTable a
INNER JOIN (
SELECT id, MAX(rev) rev
FROM YourTable
GROUP BY id
) b ON a.id = b.id AND a.rev = b.rev
Left Joining with self, tweaking join conditions and filters
In this approach, you left join the table with itself. Equality goes in the group-identifier. Then, 2 smart moves:
The second join condition is having left side value less than right value
When you do step 1, the row(s) that actually have the max value will have NULL in the right side (it's a LEFT JOIN, remember?). Then, we filter the joined result, showing only the rows where the right side is NULL.
So you end up with:
SELECT a.*
FROM YourTable a
LEFT OUTER JOIN YourTable b
ON a.id = b.id AND a.rev < b.rev
WHERE b.id IS NULL;
Conclusion
Both approaches bring the exact same result.
If you have two rows with max-value-in-group for group-identifier, both rows will be in the result in both approaches.
Both approaches are SQL ANSI compatible, thus, will work with your favorite RDBMS, regardless of its "flavor".
Both approaches are also performance friendly, however your mileage may vary (RDBMS, DB Structure, Indexes, etc.). So when you pick one approach over the other, benchmark. And make sure you pick the one which make most of sense to you.
My preference is to use as little code as possible...
You can do it using IN
try this:
SELECT *
FROM t1 WHERE (id,rev) IN
( SELECT id, MAX(rev)
FROM t1
GROUP BY id
)
to my mind it is less complicated... easier to read and maintain.
I am flabbergasted that no answer offered SQL window function solution:
SELECT a.id, a.rev, a.contents
FROM (SELECT id, rev, contents,
ROW_NUMBER() OVER (PARTITION BY id ORDER BY rev DESC) ranked_order
FROM YourTable) a
WHERE a.ranked_order = 1
Added in SQL standard ANSI/ISO Standard SQL:2003 and later extended with ANSI/ISO Standard SQL:2008, window (or windowing) functions are available with all major vendors now. There are more types of rank functions available to deal with a tie issue: RANK, DENSE_RANK, PERSENT_RANK.
Yet another solution is to use a correlated subquery:
select yt.id, yt.rev, yt.contents
from YourTable yt
where rev =
(select max(rev) from YourTable st where yt.id=st.id)
Having an index on (id,rev) renders the subquery almost as a simple lookup...
Following are comparisons to the solutions in #AdrianCarneiro's answer (subquery, leftjoin), based on MySQL measurements with InnoDB table of ~1million records, group size being: 1-3.
While for full table scans subquery/leftjoin/correlated timings relate to each other as 6/8/9, when it comes to direct lookups or batch (id in (1,2,3)), subquery is much slower then the others (Due to rerunning the subquery). However I couldnt differentiate between leftjoin and correlated solutions in speed.
One final note, as leftjoin creates n*(n+1)/2 joins in groups, its performance can be heavily affected by the size of groups...
I can't vouch for the performance, but here's a trick inspired by the limitations of Microsoft Excel. It has some good features
GOOD STUFF
It should force return of only one "max record" even if there is a tie (sometimes useful)
It doesn't require a join
APPROACH
It is a little bit ugly and requires that you know something about the range of valid values of the rev column. Let us assume that we know the rev column is a number between 0.00 and 999 including decimals but that there will only ever be two digits to the right of the decimal point (e.g. 34.17 would be a valid value).
The gist of the thing is that you create a single synthetic column by string concatenating/packing the primary comparison field along with the data you want. In this way, you can force SQL's MAX() aggregate function to return all of the data (because it has been packed into a single column). Then you have to unpack the data.
Here's how it looks with the above example, written in SQL
SELECT id,
CAST(SUBSTRING(max(packed_col) FROM 2 FOR 6) AS float) as max_rev,
SUBSTRING(max(packed_col) FROM 11) AS content_for_max_rev
FROM (SELECT id,
CAST(1000 + rev + .001 as CHAR) || '---' || CAST(content AS char) AS packed_col
FROM yourtable
)
GROUP BY id
The packing begins by forcing the rev column to be a number of known character length regardless of the value of rev so that for example
3.2 becomes 1003.201
57 becomes 1057.001
923.88 becomes 1923.881
If you do it right, string comparison of two numbers should yield the same "max" as numeric comparison of the two numbers and it's easy to convert back to the original number using the substring function (which is available in one form or another pretty much everywhere).
Unique Identifiers? Yes! Unique identifiers!
One of the best ways to develop a MySQL DB is to have each id AUTOINCREMENT (Source MySQL.com). This allows a variety of advantages, too many to cover here. The problem with the question is that its example has duplicate ids. This disregards these tremendous advantages of unique identifiers, and at the same time, is confusing to those familiar with this already.
Cleanest Solution
DB Fiddle
Newer versions of MySQL come with ONLY_FULL_GROUP_BY enabled by default, and many of the solutions here will fail in testing with this condition.
Even so, we can simply select DISTINCT someuniquefield, MAX( whateverotherfieldtoselect ), ( *somethirdfield ), etc., and have no worries understanding the result or how the query works :
SELECT DISTINCT t1.id, MAX(t1.rev), MAX(t2.content)
FROM Table1 AS t1
JOIN Table1 AS t2 ON t2.id = t1.id AND t2.rev = (
SELECT MAX(rev) FROM Table1 t3 WHERE t3.id = t1.id
)
GROUP BY t1.id;
SELECT DISTINCT Table1.id, max(Table1.rev), max(Table2.content) : Return DISTINCT somefield, MAX() some otherfield, the last MAX() is redundant, because I know it's just one row, but it's required by the query.
FROM Employee : Table searched on.
JOIN Table1 AS Table2 ON Table2.rev = Table1.rev : Join the second table on the first, because, we need to get the max(table1.rev)'s comment.
GROUP BY Table1.id: Force the top-sorted, Salary row of each employee to be the returned result.
Note that since "content" was "..." in OP's question, there's no way to test that this works. So, I changed that to "..a", "..b", so, we can actually now see that the results are correct:
id max(Table1.rev) max(Table2.content)
1 3 ..d
2 1 ..b
Why is it clean? DISTINCT(), MAX(), etc., all make wonderful use of MySQL indices. This will be faster. Or, it will be much faster, if you have indexing, and you compare it to a query that looks at all rows.
Original Solution
With ONLY_FULL_GROUP_BY disabled, we can use still use GROUP BY, but then we are only using it on the Salary, and not the id:
SELECT *
FROM
(SELECT *
FROM Employee
ORDER BY Salary DESC)
AS employeesub
GROUP BY employeesub.Salary;
SELECT * : Return all fields.
FROM Employee : Table searched on.
(SELECT *...) subquery : Return all people, sorted by Salary.
GROUP BY employeesub.Salary: Force the top-sorted, Salary row of each employee to be the returned result.
Unique-Row Solution
Note the Definition of a Relational Database: "Each row in a table has its own unique key." This would mean that, in the question's example, id would have to be unique, and in that case, we can just do :
SELECT *
FROM Employee
WHERE Employee.id = 12345
ORDER BY Employee.Salary DESC
LIMIT 1
Hopefully this is a solution that solves the problem and helps everyone better understand what's happening in the DB.
Another manner to do the job is using MAX() analytic function in OVER PARTITION clause
SELECT t.*
FROM
(
SELECT id
,rev
,contents
,MAX(rev) OVER (PARTITION BY id) as max_rev
FROM YourTable
) t
WHERE t.rev = t.max_rev
The other ROW_NUMBER() OVER PARTITION solution already documented in this post is
SELECT t.*
FROM
(
SELECT id
,rev
,contents
,ROW_NUMBER() OVER (PARTITION BY id ORDER BY rev DESC) rank
FROM YourTable
) t
WHERE t.rank = 1
This 2 SELECT work well on Oracle 10g.
MAX() solution runs certainly FASTER that ROW_NUMBER() solution because MAX() complexity is O(n) while ROW_NUMBER() complexity is at minimum O(n.log(n)) where n represent the number of records in table !
Something like this?
SELECT yourtable.id, rev, content
FROM yourtable
INNER JOIN (
SELECT id, max(rev) as maxrev
FROM yourtable
GROUP BY id
) AS child ON (yourtable.id = child.id) AND (yourtable.rev = maxrev)
I like to use a NOT EXIST-based solution for this problem:
SELECT
id,
rev
-- you can select other columns here
FROM YourTable t
WHERE NOT EXISTS (
SELECT * FROM YourTable t WHERE t.id = id AND rev > t.rev
)
This will select all records with max value within the group and allows you to select other columns.
SELECT *
FROM Employee
where Employee.Salary in (select max(salary) from Employee group by Employe_id)
ORDER BY Employee.Salary
Note: I probably wouldn't recommend this anymore in MySQL 8+ days. Haven't used it in years.
A third solution I hardly ever see mentioned is MySQL specific and looks like this:
SELECT id, MAX(rev) AS rev
, 0+SUBSTRING_INDEX(GROUP_CONCAT(numeric_content ORDER BY rev DESC), ',', 1) AS numeric_content
FROM t1
GROUP BY id
Yes it looks awful (converting to string and back etc.) but in my experience it's usually faster than the other solutions. Maybe that's just for my use cases, but I have used it on tables with millions of records and many unique ids. Maybe it's because MySQL is pretty bad at optimizing the other solutions (at least in the 5.0 days when I came up with this solution).
One important thing is that GROUP_CONCAT has a maximum length for the string it can build up. You probably want to raise this limit by setting the group_concat_max_len variable. And keep in mind that this will be a limit on scaling if you have a large number of rows.
Anyway, the above doesn't directly work if your content field is already text. In that case you probably want to use a different separator, like \0 maybe. You'll also run into the group_concat_max_len limit quicker.
I think, You want this?
select * from docs where (id, rev) IN (select id, max(rev) as rev from docs group by id order by id)
SQL Fiddle :
Check here
NOT mySQL, but for other people finding this question and using SQL, another way to resolve the greatest-n-per-group problem is using Cross Apply in MS SQL
WITH DocIds AS (SELECT DISTINCT id FROM docs)
SELECT d2.id, d2.rev, d2.content
FROM DocIds d1
CROSS APPLY (
SELECT Top 1 * FROM docs d
WHERE d.id = d1.id
ORDER BY rev DESC
) d2
Here's an example in SqlFiddle
I would use this:
select t.*
from test as t
join
(select max(rev) as rev
from test
group by id) as o
on o.rev = t.rev
Subquery SELECT is not too eficient maybe, but in JOIN clause seems to be usable. I'm not an expert in optimizing queries, but I've tried at MySQL, PostgreSQL, FireBird and it does work very good.
You can use this schema in multiple joins and with WHERE clause. It is my working example (solving identical to yours problem with table "firmy"):
select *
from platnosci as p
join firmy as f
on p.id_rel_firmy = f.id_rel
join (select max(id_obj) as id_obj
from firmy
group by id_rel) as o
on o.id_obj = f.id_obj and p.od > '2014-03-01'
It is asked on tables having teens thusands of records, and it takes less then 0,01 second on really not too strong machine.
I wouldn't use IN clause (as it is mentioned somewhere above). IN is given to use with short lists of constans, and not as to be the query filter built on subquery. It is because subquery in IN is performed for every scanned record which can made query taking very loooong time.
Since this is most popular question with regard to this problem, I'll re-post another answer to it here as well:
It looks like there is simpler way to do this (but only in MySQL):
select *
from (select * from mytable order by id, rev desc ) x
group by id
Please credit answer of user Bohemian in this question for providing such a concise and elegant answer to this problem.
Edit: though this solution works for many people it may not be stable in the long run, since MySQL doesn't guarantee that GROUP BY statement will return meaningful values for columns not in GROUP BY list. So use this solution at your own risk!
If you have many fields in select statement and you want latest value for all of those fields through optimized code:
select * from
(select * from table_name
order by id,rev desc) temp
group by id
How about this:
SELECT all_fields.*
FROM (SELECT id, MAX(rev) FROM yourtable GROUP BY id) AS max_recs
LEFT OUTER JOIN yourtable AS all_fields
ON max_recs.id = all_fields.id
This solution makes only one selection from YourTable, therefore it's faster. It works only for MySQL and SQLite(for SQLite remove DESC) according to test on sqlfiddle.com. Maybe it can be tweaked to work on other languages which I am not familiar with.
SELECT *
FROM ( SELECT *
FROM ( SELECT 1 as id, 1 as rev, 'content1' as content
UNION
SELECT 2, 1, 'content2'
UNION
SELECT 1, 2, 'content3'
UNION
SELECT 1, 3, 'content4'
) as YourTable
ORDER BY id, rev DESC
) as YourTable
GROUP BY id
Here is a nice way of doing that
Use following code :
with temp as (
select count(field1) as summ , field1
from table_name
group by field1 )
select * from temp where summ = (select max(summ) from temp)
I like to do this by ranking the records by some column. In this case, rank rev values grouped by id. Those with higher rev will have lower rankings. So highest rev will have ranking of 1.
select id, rev, content
from
(select
#rowNum := if(#prevValue = id, #rowNum+1, 1) as row_num,
id, rev, content,
#prevValue := id
from
(select id, rev, content from YOURTABLE order by id asc, rev desc) TEMP,
(select #rowNum := 1 from DUAL) X,
(select #prevValue := -1 from DUAL) Y) TEMP
where row_num = 1;
Not sure if introducing variables makes the whole thing slower. But at least I'm not querying YOURTABLE twice.
here is another solution hope it will help someone
Select a.id , a.rev, a.content from Table1 a
inner join
(SELECT id, max(rev) rev FROM Table1 GROUP BY id) x on x.id =a.id and x.rev =a.rev
None of these answers have worked for me.
This is what worked for me.
with score as (select max(score_up) from history)
select history.* from score, history where history.score_up = score.max
Here's another solution to retrieving the records only with a field that has the maximum value for that field. This works for SQL400 which is the platform I work on. In this example, the records with the maximum value in field FIELD5 will be retrieved by the following SQL statement.
SELECT A.KEYFIELD1, A.KEYFIELD2, A.FIELD3, A.FIELD4, A.FIELD5
FROM MYFILE A
WHERE RRN(A) IN
(SELECT RRN(B)
FROM MYFILE B
WHERE B.KEYFIELD1 = A.KEYFIELD1 AND B.KEYFIELD2 = A.KEYFIELD2
ORDER BY B.FIELD5 DESC
FETCH FIRST ROW ONLY)
Sorted the rev field in reverse order and then grouped by id which gave the first row of each grouping which is the one with the highest rev value.
SELECT * FROM (SELECT * FROM table1 ORDER BY id, rev DESC) X GROUP BY X.id;
Tested in http://sqlfiddle.com/ with the following data
CREATE TABLE table1
(`id` int, `rev` int, `content` varchar(11));
INSERT INTO table1
(`id`, `rev`, `content`)
VALUES
(1, 1, 'One-One'),
(1, 2, 'One-Two'),
(2, 1, 'Two-One'),
(2, 2, 'Two-Two'),
(3, 2, 'Three-Two'),
(3, 1, 'Three-One'),
(3, 3, 'Three-Three')
;
This gave the following result in MySql 5.5 and 5.6
id rev content
1 2 One-Two
2 2 Two-Two
3 3 Three-Two
You can make the select without a join when you combine the rev and id into one maxRevId value for MAX() and then split it back to original values:
SELECT maxRevId & ((1 << 32) - 1) as id, maxRevId >> 32 AS rev
FROM (SELECT MAX(((rev << 32) | id)) AS maxRevId
FROM YourTable
GROUP BY id) x;
This is especially fast when there is a complex join instead of a single table. With the traditional approaches the complex join would be done twice.
The above combination is simple with bit functions when rev and id are INT UNSIGNED (32 bit) and combined value fits to BIGINT UNSIGNED (64 bit). When the id & rev are larger than 32-bit values or made of multiple columns, you need combine the value into e.g. a binary value with suitable padding for MAX().
Explanation
This is not pure SQL. This will use the SQLAlchemy ORM.
I came here looking for SQLAlchemy help, so I will duplicate Adrian Carneiro's answer with the python/SQLAlchemy version, specifically the outer join part.
This query answers the question of:
"Can you return me the records in this group of records (based on same id) that have the highest version number".
This allows me to duplicate the record, update it, increment its version number, and have the copy of the old version in such a way that I can show change over time.
Code
MyTableAlias = aliased(MyTable)
newest_records = appdb.session.query(MyTable).select_from(join(
MyTable,
MyTableAlias,
onclause=and_(
MyTable.id == MyTableAlias.id,
MyTable.version_int < MyTableAlias.version_int
),
isouter=True
)
).filter(
MyTableAlias.id == None,
).all()
Tested on a PostgreSQL database.
I used the below to solve a problem of my own. I first created a temp table and inserted the max rev value per unique id.
CREATE TABLE #temp1
(
id varchar(20)
, rev int
)
INSERT INTO #temp1
SELECT a.id, MAX(a.rev) as rev
FROM
(
SELECT id, content, SUM(rev) as rev
FROM YourTable
GROUP BY id, content
) as a
GROUP BY a.id
ORDER BY a.id
I then joined these max values (#temp1) to all of the possible id/content combinations. By doing this, I naturally filter out the non-maximum id/content combinations, and am left with the only max rev values for each.
SELECT a.id, a.rev, content
FROM #temp1 as a
LEFT JOIN
(
SELECT id, content, SUM(rev) as rev
FROM YourTable
GROUP BY id, content
) as b on a.id = b.id and a.rev = b.rev
GROUP BY a.id, a.rev, b.content
ORDER BY a.id
I have a table and want to calculate the percentage of total by store_id which each (category_id, store_id) subtotal represents. My code is below:
WITH
example_table (name, store_id)
AS
(
select name, store_id
from category
join film_category using (category_id)
join film using (film_id)
join inventory using (film_id)
join rental using (inventory_id)
)
SELECT name, store_id, cast(count(*) as numeric)/(SELECT count(*) FROM example_table)
FROM example_table
GROUP BY name, store_id
ORDER BY name, store_id
This code actually works, as in, it doesn't throw an error, only they're not the results I'm looking for. Here each of the subtotals is divided by the total across both stores and all 16 names. Instead, I want the subtotals divided by their respective store totals or divided by their respective name totals.
I'm wondering how to perform calculations on those subtotals in general.
Thanks in advance,
I believe you need to explore the possibilities of using aggregate functions combined with an OVER(PARTITION BY ...) e.g.
SELECT DISTINCT
name, store_id, store_id_count, name_count
FROM (
select name, store_id
, count(*) over(partition by store_id) as store_id_count
, count(*) over(partition by name) as name_count
from category
join film_category using (category_id)
join film using (film_id)
join inventory using (film_id)
join rental using (inventory_id)
) AS example_table
When using aggregate function with the over clause you get the wanted counts on each row of the result, and it seems that in this case you need this. Note that select distinct has been used simply to reduce the final number of rows returned, you might still need to use a group by but I am not sure if you do.
Once you have the needed values within the derived table (aliases as example_table) then it should be a simple matter of some arithmetic in the overall select clause.
Want to improve this post? Provide detailed answers to this question, including citations and an explanation of why your answer is correct. Answers without enough detail may be edited or deleted.
This question already has answers here:
Retrieving the last record in each group - MySQL
(33 answers)
Closed 3 years ago.
I have this table for documents (simplified version here):
id
rev
content
1
1
...
2
1
...
1
2
...
1
3
...
How do I select one row per id and only the greatest rev?
With the above data, the result should contain two rows: [1, 3, ...] and [2, 1, ..]. I'm using MySQL.
Currently I use checks in the while loop to detect and over-write old revs from the resultset. But is this the only method to achieve the result? Isn't there a SQL solution?
At first glance...
All you need is a GROUP BY clause with the MAX aggregate function:
SELECT id, MAX(rev)
FROM YourTable
GROUP BY id
It's never that simple, is it?
I just noticed you need the content column as well.
This is a very common question in SQL: find the whole data for the row with some max value in a column per some group identifier. I heard that a lot during my career. Actually, it was one the questions I answered in my current job's technical interview.
It is, actually, so common that Stack Overflow community has created a single tag just to deal with questions like that: greatest-n-per-group.
Basically, you have two approaches to solve that problem:
Joining with simple group-identifier, max-value-in-group Sub-query
In this approach, you first find the group-identifier, max-value-in-group (already solved above) in a sub-query. Then you join your table to the sub-query with equality on both group-identifier and max-value-in-group:
SELECT a.id, a.rev, a.contents
FROM YourTable a
INNER JOIN (
SELECT id, MAX(rev) rev
FROM YourTable
GROUP BY id
) b ON a.id = b.id AND a.rev = b.rev
Left Joining with self, tweaking join conditions and filters
In this approach, you left join the table with itself. Equality goes in the group-identifier. Then, 2 smart moves:
The second join condition is having left side value less than right value
When you do step 1, the row(s) that actually have the max value will have NULL in the right side (it's a LEFT JOIN, remember?). Then, we filter the joined result, showing only the rows where the right side is NULL.
So you end up with:
SELECT a.*
FROM YourTable a
LEFT OUTER JOIN YourTable b
ON a.id = b.id AND a.rev < b.rev
WHERE b.id IS NULL;
Conclusion
Both approaches bring the exact same result.
If you have two rows with max-value-in-group for group-identifier, both rows will be in the result in both approaches.
Both approaches are SQL ANSI compatible, thus, will work with your favorite RDBMS, regardless of its "flavor".
Both approaches are also performance friendly, however your mileage may vary (RDBMS, DB Structure, Indexes, etc.). So when you pick one approach over the other, benchmark. And make sure you pick the one which make most of sense to you.
My preference is to use as little code as possible...
You can do it using IN
try this:
SELECT *
FROM t1 WHERE (id,rev) IN
( SELECT id, MAX(rev)
FROM t1
GROUP BY id
)
to my mind it is less complicated... easier to read and maintain.
I am flabbergasted that no answer offered SQL window function solution:
SELECT a.id, a.rev, a.contents
FROM (SELECT id, rev, contents,
ROW_NUMBER() OVER (PARTITION BY id ORDER BY rev DESC) ranked_order
FROM YourTable) a
WHERE a.ranked_order = 1
Added in SQL standard ANSI/ISO Standard SQL:2003 and later extended with ANSI/ISO Standard SQL:2008, window (or windowing) functions are available with all major vendors now. There are more types of rank functions available to deal with a tie issue: RANK, DENSE_RANK, PERSENT_RANK.
Yet another solution is to use a correlated subquery:
select yt.id, yt.rev, yt.contents
from YourTable yt
where rev =
(select max(rev) from YourTable st where yt.id=st.id)
Having an index on (id,rev) renders the subquery almost as a simple lookup...
Following are comparisons to the solutions in #AdrianCarneiro's answer (subquery, leftjoin), based on MySQL measurements with InnoDB table of ~1million records, group size being: 1-3.
While for full table scans subquery/leftjoin/correlated timings relate to each other as 6/8/9, when it comes to direct lookups or batch (id in (1,2,3)), subquery is much slower then the others (Due to rerunning the subquery). However I couldnt differentiate between leftjoin and correlated solutions in speed.
One final note, as leftjoin creates n*(n+1)/2 joins in groups, its performance can be heavily affected by the size of groups...
I can't vouch for the performance, but here's a trick inspired by the limitations of Microsoft Excel. It has some good features
GOOD STUFF
It should force return of only one "max record" even if there is a tie (sometimes useful)
It doesn't require a join
APPROACH
It is a little bit ugly and requires that you know something about the range of valid values of the rev column. Let us assume that we know the rev column is a number between 0.00 and 999 including decimals but that there will only ever be two digits to the right of the decimal point (e.g. 34.17 would be a valid value).
The gist of the thing is that you create a single synthetic column by string concatenating/packing the primary comparison field along with the data you want. In this way, you can force SQL's MAX() aggregate function to return all of the data (because it has been packed into a single column). Then you have to unpack the data.
Here's how it looks with the above example, written in SQL
SELECT id,
CAST(SUBSTRING(max(packed_col) FROM 2 FOR 6) AS float) as max_rev,
SUBSTRING(max(packed_col) FROM 11) AS content_for_max_rev
FROM (SELECT id,
CAST(1000 + rev + .001 as CHAR) || '---' || CAST(content AS char) AS packed_col
FROM yourtable
)
GROUP BY id
The packing begins by forcing the rev column to be a number of known character length regardless of the value of rev so that for example
3.2 becomes 1003.201
57 becomes 1057.001
923.88 becomes 1923.881
If you do it right, string comparison of two numbers should yield the same "max" as numeric comparison of the two numbers and it's easy to convert back to the original number using the substring function (which is available in one form or another pretty much everywhere).
Unique Identifiers? Yes! Unique identifiers!
One of the best ways to develop a MySQL DB is to have each id AUTOINCREMENT (Source MySQL.com). This allows a variety of advantages, too many to cover here. The problem with the question is that its example has duplicate ids. This disregards these tremendous advantages of unique identifiers, and at the same time, is confusing to those familiar with this already.
Cleanest Solution
DB Fiddle
Newer versions of MySQL come with ONLY_FULL_GROUP_BY enabled by default, and many of the solutions here will fail in testing with this condition.
Even so, we can simply select DISTINCT someuniquefield, MAX( whateverotherfieldtoselect ), ( *somethirdfield ), etc., and have no worries understanding the result or how the query works :
SELECT DISTINCT t1.id, MAX(t1.rev), MAX(t2.content)
FROM Table1 AS t1
JOIN Table1 AS t2 ON t2.id = t1.id AND t2.rev = (
SELECT MAX(rev) FROM Table1 t3 WHERE t3.id = t1.id
)
GROUP BY t1.id;
SELECT DISTINCT Table1.id, max(Table1.rev), max(Table2.content) : Return DISTINCT somefield, MAX() some otherfield, the last MAX() is redundant, because I know it's just one row, but it's required by the query.
FROM Employee : Table searched on.
JOIN Table1 AS Table2 ON Table2.rev = Table1.rev : Join the second table on the first, because, we need to get the max(table1.rev)'s comment.
GROUP BY Table1.id: Force the top-sorted, Salary row of each employee to be the returned result.
Note that since "content" was "..." in OP's question, there's no way to test that this works. So, I changed that to "..a", "..b", so, we can actually now see that the results are correct:
id max(Table1.rev) max(Table2.content)
1 3 ..d
2 1 ..b
Why is it clean? DISTINCT(), MAX(), etc., all make wonderful use of MySQL indices. This will be faster. Or, it will be much faster, if you have indexing, and you compare it to a query that looks at all rows.
Original Solution
With ONLY_FULL_GROUP_BY disabled, we can use still use GROUP BY, but then we are only using it on the Salary, and not the id:
SELECT *
FROM
(SELECT *
FROM Employee
ORDER BY Salary DESC)
AS employeesub
GROUP BY employeesub.Salary;
SELECT * : Return all fields.
FROM Employee : Table searched on.
(SELECT *...) subquery : Return all people, sorted by Salary.
GROUP BY employeesub.Salary: Force the top-sorted, Salary row of each employee to be the returned result.
Unique-Row Solution
Note the Definition of a Relational Database: "Each row in a table has its own unique key." This would mean that, in the question's example, id would have to be unique, and in that case, we can just do :
SELECT *
FROM Employee
WHERE Employee.id = 12345
ORDER BY Employee.Salary DESC
LIMIT 1
Hopefully this is a solution that solves the problem and helps everyone better understand what's happening in the DB.
Another manner to do the job is using MAX() analytic function in OVER PARTITION clause
SELECT t.*
FROM
(
SELECT id
,rev
,contents
,MAX(rev) OVER (PARTITION BY id) as max_rev
FROM YourTable
) t
WHERE t.rev = t.max_rev
The other ROW_NUMBER() OVER PARTITION solution already documented in this post is
SELECT t.*
FROM
(
SELECT id
,rev
,contents
,ROW_NUMBER() OVER (PARTITION BY id ORDER BY rev DESC) rank
FROM YourTable
) t
WHERE t.rank = 1
This 2 SELECT work well on Oracle 10g.
MAX() solution runs certainly FASTER that ROW_NUMBER() solution because MAX() complexity is O(n) while ROW_NUMBER() complexity is at minimum O(n.log(n)) where n represent the number of records in table !
Something like this?
SELECT yourtable.id, rev, content
FROM yourtable
INNER JOIN (
SELECT id, max(rev) as maxrev
FROM yourtable
GROUP BY id
) AS child ON (yourtable.id = child.id) AND (yourtable.rev = maxrev)
I like to use a NOT EXIST-based solution for this problem:
SELECT
id,
rev
-- you can select other columns here
FROM YourTable t
WHERE NOT EXISTS (
SELECT * FROM YourTable t WHERE t.id = id AND rev > t.rev
)
This will select all records with max value within the group and allows you to select other columns.
SELECT *
FROM Employee
where Employee.Salary in (select max(salary) from Employee group by Employe_id)
ORDER BY Employee.Salary
Note: I probably wouldn't recommend this anymore in MySQL 8+ days. Haven't used it in years.
A third solution I hardly ever see mentioned is MySQL specific and looks like this:
SELECT id, MAX(rev) AS rev
, 0+SUBSTRING_INDEX(GROUP_CONCAT(numeric_content ORDER BY rev DESC), ',', 1) AS numeric_content
FROM t1
GROUP BY id
Yes it looks awful (converting to string and back etc.) but in my experience it's usually faster than the other solutions. Maybe that's just for my use cases, but I have used it on tables with millions of records and many unique ids. Maybe it's because MySQL is pretty bad at optimizing the other solutions (at least in the 5.0 days when I came up with this solution).
One important thing is that GROUP_CONCAT has a maximum length for the string it can build up. You probably want to raise this limit by setting the group_concat_max_len variable. And keep in mind that this will be a limit on scaling if you have a large number of rows.
Anyway, the above doesn't directly work if your content field is already text. In that case you probably want to use a different separator, like \0 maybe. You'll also run into the group_concat_max_len limit quicker.
I think, You want this?
select * from docs where (id, rev) IN (select id, max(rev) as rev from docs group by id order by id)
SQL Fiddle :
Check here
NOT mySQL, but for other people finding this question and using SQL, another way to resolve the greatest-n-per-group problem is using Cross Apply in MS SQL
WITH DocIds AS (SELECT DISTINCT id FROM docs)
SELECT d2.id, d2.rev, d2.content
FROM DocIds d1
CROSS APPLY (
SELECT Top 1 * FROM docs d
WHERE d.id = d1.id
ORDER BY rev DESC
) d2
Here's an example in SqlFiddle
I would use this:
select t.*
from test as t
join
(select max(rev) as rev
from test
group by id) as o
on o.rev = t.rev
Subquery SELECT is not too eficient maybe, but in JOIN clause seems to be usable. I'm not an expert in optimizing queries, but I've tried at MySQL, PostgreSQL, FireBird and it does work very good.
You can use this schema in multiple joins and with WHERE clause. It is my working example (solving identical to yours problem with table "firmy"):
select *
from platnosci as p
join firmy as f
on p.id_rel_firmy = f.id_rel
join (select max(id_obj) as id_obj
from firmy
group by id_rel) as o
on o.id_obj = f.id_obj and p.od > '2014-03-01'
It is asked on tables having teens thusands of records, and it takes less then 0,01 second on really not too strong machine.
I wouldn't use IN clause (as it is mentioned somewhere above). IN is given to use with short lists of constans, and not as to be the query filter built on subquery. It is because subquery in IN is performed for every scanned record which can made query taking very loooong time.
Since this is most popular question with regard to this problem, I'll re-post another answer to it here as well:
It looks like there is simpler way to do this (but only in MySQL):
select *
from (select * from mytable order by id, rev desc ) x
group by id
Please credit answer of user Bohemian in this question for providing such a concise and elegant answer to this problem.
Edit: though this solution works for many people it may not be stable in the long run, since MySQL doesn't guarantee that GROUP BY statement will return meaningful values for columns not in GROUP BY list. So use this solution at your own risk!
If you have many fields in select statement and you want latest value for all of those fields through optimized code:
select * from
(select * from table_name
order by id,rev desc) temp
group by id
How about this:
SELECT all_fields.*
FROM (SELECT id, MAX(rev) FROM yourtable GROUP BY id) AS max_recs
LEFT OUTER JOIN yourtable AS all_fields
ON max_recs.id = all_fields.id
This solution makes only one selection from YourTable, therefore it's faster. It works only for MySQL and SQLite(for SQLite remove DESC) according to test on sqlfiddle.com. Maybe it can be tweaked to work on other languages which I am not familiar with.
SELECT *
FROM ( SELECT *
FROM ( SELECT 1 as id, 1 as rev, 'content1' as content
UNION
SELECT 2, 1, 'content2'
UNION
SELECT 1, 2, 'content3'
UNION
SELECT 1, 3, 'content4'
) as YourTable
ORDER BY id, rev DESC
) as YourTable
GROUP BY id
Here is a nice way of doing that
Use following code :
with temp as (
select count(field1) as summ , field1
from table_name
group by field1 )
select * from temp where summ = (select max(summ) from temp)
I like to do this by ranking the records by some column. In this case, rank rev values grouped by id. Those with higher rev will have lower rankings. So highest rev will have ranking of 1.
select id, rev, content
from
(select
#rowNum := if(#prevValue = id, #rowNum+1, 1) as row_num,
id, rev, content,
#prevValue := id
from
(select id, rev, content from YOURTABLE order by id asc, rev desc) TEMP,
(select #rowNum := 1 from DUAL) X,
(select #prevValue := -1 from DUAL) Y) TEMP
where row_num = 1;
Not sure if introducing variables makes the whole thing slower. But at least I'm not querying YOURTABLE twice.
here is another solution hope it will help someone
Select a.id , a.rev, a.content from Table1 a
inner join
(SELECT id, max(rev) rev FROM Table1 GROUP BY id) x on x.id =a.id and x.rev =a.rev
None of these answers have worked for me.
This is what worked for me.
with score as (select max(score_up) from history)
select history.* from score, history where history.score_up = score.max
Here's another solution to retrieving the records only with a field that has the maximum value for that field. This works for SQL400 which is the platform I work on. In this example, the records with the maximum value in field FIELD5 will be retrieved by the following SQL statement.
SELECT A.KEYFIELD1, A.KEYFIELD2, A.FIELD3, A.FIELD4, A.FIELD5
FROM MYFILE A
WHERE RRN(A) IN
(SELECT RRN(B)
FROM MYFILE B
WHERE B.KEYFIELD1 = A.KEYFIELD1 AND B.KEYFIELD2 = A.KEYFIELD2
ORDER BY B.FIELD5 DESC
FETCH FIRST ROW ONLY)
Sorted the rev field in reverse order and then grouped by id which gave the first row of each grouping which is the one with the highest rev value.
SELECT * FROM (SELECT * FROM table1 ORDER BY id, rev DESC) X GROUP BY X.id;
Tested in http://sqlfiddle.com/ with the following data
CREATE TABLE table1
(`id` int, `rev` int, `content` varchar(11));
INSERT INTO table1
(`id`, `rev`, `content`)
VALUES
(1, 1, 'One-One'),
(1, 2, 'One-Two'),
(2, 1, 'Two-One'),
(2, 2, 'Two-Two'),
(3, 2, 'Three-Two'),
(3, 1, 'Three-One'),
(3, 3, 'Three-Three')
;
This gave the following result in MySql 5.5 and 5.6
id rev content
1 2 One-Two
2 2 Two-Two
3 3 Three-Two
You can make the select without a join when you combine the rev and id into one maxRevId value for MAX() and then split it back to original values:
SELECT maxRevId & ((1 << 32) - 1) as id, maxRevId >> 32 AS rev
FROM (SELECT MAX(((rev << 32) | id)) AS maxRevId
FROM YourTable
GROUP BY id) x;
This is especially fast when there is a complex join instead of a single table. With the traditional approaches the complex join would be done twice.
The above combination is simple with bit functions when rev and id are INT UNSIGNED (32 bit) and combined value fits to BIGINT UNSIGNED (64 bit). When the id & rev are larger than 32-bit values or made of multiple columns, you need combine the value into e.g. a binary value with suitable padding for MAX().
Explanation
This is not pure SQL. This will use the SQLAlchemy ORM.
I came here looking for SQLAlchemy help, so I will duplicate Adrian Carneiro's answer with the python/SQLAlchemy version, specifically the outer join part.
This query answers the question of:
"Can you return me the records in this group of records (based on same id) that have the highest version number".
This allows me to duplicate the record, update it, increment its version number, and have the copy of the old version in such a way that I can show change over time.
Code
MyTableAlias = aliased(MyTable)
newest_records = appdb.session.query(MyTable).select_from(join(
MyTable,
MyTableAlias,
onclause=and_(
MyTable.id == MyTableAlias.id,
MyTable.version_int < MyTableAlias.version_int
),
isouter=True
)
).filter(
MyTableAlias.id == None,
).all()
Tested on a PostgreSQL database.
I used the below to solve a problem of my own. I first created a temp table and inserted the max rev value per unique id.
CREATE TABLE #temp1
(
id varchar(20)
, rev int
)
INSERT INTO #temp1
SELECT a.id, MAX(a.rev) as rev
FROM
(
SELECT id, content, SUM(rev) as rev
FROM YourTable
GROUP BY id, content
) as a
GROUP BY a.id
ORDER BY a.id
I then joined these max values (#temp1) to all of the possible id/content combinations. By doing this, I naturally filter out the non-maximum id/content combinations, and am left with the only max rev values for each.
SELECT a.id, a.rev, content
FROM #temp1 as a
LEFT JOIN
(
SELECT id, content, SUM(rev) as rev
FROM YourTable
GROUP BY id, content
) as b on a.id = b.id and a.rev = b.rev
GROUP BY a.id, a.rev, b.content
ORDER BY a.id
I am trying to find the most frequent value in a postgresql table. The problem is that I also want to "group by" in that table and only get the most frequent from the values that have the same name.
So I have the following query:
select name,
(SELECT value FROM table where name=name GROUP BY value ORDER BY COUNT(*) DESC limit 1)
as mfq from table group by name;
So, I am using where name=name, trying to get the outside group by attribute "name", but it doesn't seem to work. Any ideas on how to do it?
Edit: for example in the following table:
name value
a 3
a 3
a 3
b 2
b 2
I want to get:
name value
a 3
b 2
but the above statement gives:
name value
a 3
b 3
instead, since where doesn't work correctly.
There is a dedicated function in PostgreSQL for this case: the mode() ordered-set aggregate:
select name, mode() within group (order by value) mode_value
from table
group by name;
which returns the most frequent input value (arbitrarily choosing the first one if there are multiple equally-frequent results) -- which is the same behavior as with your order by count(*) desc limit 1.
It is available from PostgreSQL 9.4+.
http://rextester.com/GHGJH15037
If you want your query to work, you need table aliases. Table aliases and qualified column names are always a good idea:
select t.name,
(select t2.value
from table t2
where t2.name = t.name
group by t2.value
order by COUNT(*) desc
limit 1
) as mfq
from table t
group by t.name;