i have a string "October.29.2009 11:00 a.m."
I want to write a generic code that will replace the time with blank space.
I have tried the below code :
{
val date="October.29.2009 11:00 a.m." //time may be any value
date.replace("a.m.","").replace("p.m.","")
}
Above code can replace am and pm only. I need to replace time also.
Have you tried splitting the string. Use this:
date.split(" ")
The first element of the array returned will give you the date without time.
you can use regex like that
^([0-9]|0[0-9]|1[0-9]|2[0-3]):[0-5][0-9]$
Is your time always with leading zeros?
07:08
Then use
myString.reverse.substring(countYourCharsAndDigits).reverse
Or use a regex that matches the first part, that you are interestet in, and the rest and write it like
def dateExtractor(date:String) = {
val MatchExpression = "('hereTheRegExForTheInterestingPart')('regExForRest)".r
val MatchExpression(myNewString,rest) = date
myNewString
}
the ( and ) is needed for the matchen the ' not
Related
I'm using AutoHotkey for this as the code is the most understandable to me. So I have a document with numbers and text, for example like this
120344 text text text
234000 text text
and the desired output is
12:03:44 text text text
23:40:00 text text
I'm sure StrReplace can be used to insert the colons in, but I'm not sure how to specify the position of the colons or ask AHK to 'find' specific strings of 6 digit numbers. Before, I would have highlighted the text I want to apply StrReplace to and then press a hotkey, but I was wondering if there is a more efficient way to do this that doesn't need my interaction. Even just pointing to the relevant functions I would need to look into to do this would be helpful! Thanks so much, I'm still very new to programming.
hfontanez's answer was very helpful in figuring out that for this problem, I had to use a loop and substring function. I'm sure there are much less messy ways to write this code, but this is the final version of what worked for my purposes:
Loop, read, C:\[location of input file]
{
{ If A_LoopReadLine = ;
Continue ; this part is to ignore the blank lines in the file
}
{
one := A_LoopReadLine
x := SubStr(one, 1, 2)
y := SubStr(one, 3, 2)
z := SubStr(one, 5)
two := x . ":" . y . ":" . z
FileAppend, %two%`r`n, C:\[location of output file]
}
}
return
Assuming that the "timestamp" component is always 6 characters long and always at the beginning of the string, this solution should work just fine.
String test = "012345 test test test";
test = test.substring(0, 2) + ":" + test.substring(2, 4) + ":" + test.substring(4, test.length());
This outputs 01:23:45 test test test
Why? Because you are temporarily creating a String object that it's two characters long and then you insert the colon before taking the next pair. Lastly, you append the rest of the String and assign it to whichever String variable you want. Remember, the substring method doesn't modify the String object you are calling the method on. This method returns a "new" String object. Therefore, the variable test is unmodified until the assignment operation kicks in at the end.
Alternatively, you can use a StringBuilder and append each component like this:
StringBuilder sbuff = new StringBuilder();
sbuff.append(test.substring(0,2));
sbuff.append(":");
sbuff.append(test.substring(2,4));
sbuff.append(":");
sbuff.append(test.substring(4,test.length()));
test = sbuff.toString();
You could also use a "fancy" loop to do this, but I think for something this simple, looping is just overkill. Oh, I almost forgot, this should work with both of your test strings because after the last colon insert, the code takes the substring from index position 4 all the way to the end of the string indiscriminately.
I am trying use String(format:, ) for reading some characters from left or right, do we have something for this job?
for example reading 2 characters from left would be: "AB" like this: "%2L#"
my code:
let stringOfText = String(format: "%#", "ABCDEF")
String(format:) is usually to transform a different value type into a string.
Since you already have a string, you don't really need this method.
try:
https://developer.apple.com/documentation/swift/string/2894830-prefix
I have the following Powershell variable
$var = "AB-0045"
I would like to increase the number in the string to become "AB-0046".
I can do:
$newNumber = [int]$var.Substring($var.length -4,4) + 1
Which will give me the desired number 46, but then I have to append that 46 as a string to a new string "AB-00".
Is there a better way to do that?
Now that you have the integer, you'll have to convert back to string formatted in the way you'd like and concatenate.
I'd recommend adding to "AB-" rather than "AB-00" in case your number goes over 100.
To pad leading zeros, you can use the -f operator.
e.g. "{0:d4}" -f 45
You'll still need to get the integer first (45 in the example) from your original string.
I tested with regex class Replace() method and string class Split() method with string formatter. Split() seems faster provided your string is always in the same format. The Replace() method does not care what happens before the last 4 numbers:
# Replace Method
[regex]::Replace($var,'\d{4}$',{([int]$args[0].Value+1).ToString('0000')})
# Split method
$a,[int]$b = $var.split('-'); "{0}-{1:0000}" -f $a,++$b
I have a string and I need two characters to be returned.
I tried with strsplit but the delimiter must be a string and I don't have any delimiters in my string. Instead, I always want to get the second number in my string. The number is always 2 digits.
Example: 001a02.jpg I use the fileparts function to delete the extension of the image (jpg), so I get this string: 001a02
The expected return value is 02
Another example: 001A43a . Return values: 43
Another one: 002A12. Return values: 12
All the filenames are in a matrix 1002x1. Maybe I can use textscan but in the second example, it gives "43a" as a result.
(Just so this question doesn't remain unanswered, here's a possible approach: )
One way to go about this uses splitting with regular expressions (MATLAB's strsplit which you mentioned):
str = '001a02.jpg';
C = strsplit(str,'[a-zA-Z.]','DelimiterType','RegularExpression');
Results in:
C =
'001' '02' ''
In older versions of MATLAB, before strsplit was introduced, similar functionality was achieved using regexp(...,'split').
If you want to learn more about regular expressions (abbreviated as "regex" or "regexp"), there are many online resources (JGI..)
In your case, if you only need to take the 5th and 6th characters from the string you could use:
D = str(5:6);
... and if you want to convert those into numbers you could use:
E = str2double(str(5:6));
If your number is always at a certain position in the string, you can simply index this position.
In the examples you gave, the number is always the 5th and 6th characters in the string.
filename = '002A12';
num = str2num(filename(5:6));
Otherwise, if the formating is more complex, you may want to use a regular expression. There is a similar question matlab - extracting numbers from (odd) string. Modifying the code found there you can do the following
all_num = regexp(filename, '\d+', 'match'); %Find all numbers in the filename
num = str2num(all_num{2}) %Convert second number from str
I have a huge string. I need to extract a substring from that that huge string. The conditions are the string starts with either "TECHNICAL" or "JUSTIFY" and ends with a number, any number from 1 to 10. so for example, i have
string x = "This is a test, again I am test TECHNICAL: I need to extract this substring starting with testing. 8. This is test again and again and again and again";
so I need this
TECHNICAL: I need to extract this substring starting with testing.
I was wondering if someone has elegant solution for that.
Thanks in advance.
You can use Regular Expression for that.
Example:
string input = "This is a test, again I am test TECHNICAL: I need to extract this substring starting with testing. 8. This is test again and again and again and again";
string pattern = #"(TECHNICAL|JUSTIFY).*?(10|[1-9])";
System.Text.RegularExpressions.Regex myTextRegex = new Regex(pattern);
Match match = myTextRegex.Match(input );
string matched = null;
if (match.Groups.Count > 0)
{
matched = match.Groups[0].Value;
}
//Result: matched = TECHNICAL: I need to extract this substring starting with testing. 8