Wordpress 4.5 installed and hosted on WAMP server 2.5
Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in C:\wamp\www\wordpress\index.php on line 14
SCREENSHOT OF THE WHOLE ERROR
To stop the message from being produced do this
Using the wampmanager menus ...
wampmanager -> PHP -> php.ini
This opens the correct php.ini file in your default editor
Find this line (aprox line 451)
error_reporting = E_ALL
and change it to
error_reporting = E_ALL & ~E_DEPRECATED
Related
we got a new WebServer with CentOS, Plesk and php-fpm.
Now we don't get the php extension running.
What we did:
installed latest SQL Anywhere 17 (ebf29577)
copied php-7.3.0_sqlanywhere_r.so to /opt/plesk/php/7.3/lib64/php/modules/
loading php-7.3.0_sqlanywhere_r.so via /opt/plesk/php/7.3/etc/php.d/sqlanywhere.ini
this leads to an error:
WARNING: [pool plesk-php73-fpm.plesk-service.localdomain] child 11616 said into stderr: "NOTICE: PHP message: PHP Warning: request_startup() for sqlanywhere module failed in Unknown on line 0"
(This leads to php 7.3 fpm is not loading at all)
next try was to switch from FPM to CGI: same error
module is loadable itself within shell if LD_LIBRARY_PATH was enhanced with path /opt/sqlanywhere17/lib64/
some tries getting the cause by strace did not help
Has anybody an idea or maybe even successfully installed php extension.
Thanks
Florian
after a lot of tests we found a solution:
in Plesk Domain php settings we had to add:
[php-fpm-pool-settings]
env[LD_LIBRARY_PATH]="/opt/sqlanywhere_v2/lib64:$LD_LIBRARY_PATH"
Now all libs are found and it works
For me solution was, creating custom handler:
plesk bin php_handler --add -displayname "PHP SQLAnywhere 7.4" -path /opt/php-custom-handlers/7.4/php-sqlanywhere.fcgi -clipath /opt/plesk/php/7.4/bin/php -phpini /opt/plesk/php/7.4/etc/php.ini -type fastcgi
php-sqlanywhere.fcgi contents:
#!/bin/bash
LD_LIBRARY_PATH=/opt/sqlanywhere17/lib64
export LD_LIBRARY_PATH
exec /opt/plesk/php/7.4/bin/php-cgi "$#"
And finally using this handler on domain php settings and adding on additional directives:
extension=sqlanywhere.so
I try to start a new project symfony 5 simple. When I start the server "symfony server: start", I have this answer:
Parse error: syntax error, unexpected '?' In C:\Users\Philippe\Documents\my_project_name\public\index.php on line 15.
I have windws 10, PHP 7.4.3, wamp server but its off.
I show you my terminal:
Answer is simple php5.6 does not support Null coalescing operator (??). This operator is available from PHP7+ (php.net)
Solution 1:
Upgrade your PHP version to ^7
Solution 2:
Change code
PHP 7+ $username = $loggedUser ?? 'nobody';
PHP 5.6 $username = isset($loggedUser) ? $loggedUser : 'nobody';
both is equivalent, return logged user if set, otherwise nobody.
It says in the output that you are running "PHP cgi v5.6.40". Run symfony local:php:list and see what is available to be able to be run. You need to install PHP 7.4 as php-fpm (if available on WAMP), or php-cgi. The Symfony Server can't use the cli version to run webpages.
symfony local:php:refresh may also help, or install other versions of PHP.
> symfony local:php:list
# You'll see all supported SAPIs (CGI, FastCGI, etc.) for each version.
# FastCGI (php-fpm) is used when possible; then CGI (which acts as a FastCGI
# server as well), and finally, the server falls back to plain CGI.
from: https://symfony.com/doc/current/setup/symfony_server.html#selecting-a-different-php-version
So I checked my spam folder today and had 122 messages send through the server stating:
PHP Warning: Module 'imagick' already loaded in Unknown on line 0
Non stop it keeps sending me this.
Googled it and still have no clue on how to fix it as I need a step by step answer.
Found a similar question on stack but it's too complicated for me to understand.
I'm on the latest Plesk Onyx and OS=Ubuntu 16.04.6 LTS‬.
As I'm running php 7.3 I hoped when I uninstalled php 7.0 in plesk it would go away but unfortunately it didn't.
It's send from here
Cron <root#server> [ -x /usr/lib/php/sessionclean ] && /usr/lib/php/sessionclean
And after php --ini (read about it on a forum) this was the result:
PHP Warning: Module 'imagick' already loaded in Unknown on line 0
Configuration File (php.ini) Path: /etc/php/7.0/cli
Loaded Configuration File: /etc/php/7.0/cli/php.ini
Scan for additional .ini files in: /etc/php/7.0/cli/conf.d
Additional .ini files parsed: /etc/php/7.0/cli/conf.d/00-ioncube-loader-7.0.ini,
/etc/php/7.0/cli/conf.d/10-mysqlnd.ini,
/etc/php/7.0/cli/conf.d/10-opcache.ini,
/etc/php/7.0/cli/conf.d/10-pdo.ini,
/etc/php/7.0/cli/conf.d/15-xml.ini,
/etc/php/7.0/cli/conf.d/20-calendar.ini,
/etc/php/7.0/cli/conf.d/20-ctype.ini,
/etc/php/7.0/cli/conf.d/20-curl.ini,
/etc/php/7.0/cli/conf.d/20-dom.ini,
/etc/php/7.0/cli/conf.d/20-exif.ini,
/etc/php/7.0/cli/conf.d/20-fileinfo.ini,
/etc/php/7.0/cli/conf.d/20-ftp.ini,
/etc/php/7.0/cli/conf.d/20-gd.ini,
/etc/php/7.0/cli/conf.d/20-gettext.ini,
/etc/php/7.0/cli/conf.d/20-iconv.ini,
/etc/php/7.0/cli/conf.d/20-imagick.ini,
/etc/php/7.0/cli/conf.d/20-imap.ini,
/etc/php/7.0/cli/conf.d/20-json.ini,
/etc/php/7.0/cli/conf.d/20-mbstring.ini,
/etc/php/7.0/cli/conf.d/20-mysqli.ini,
/etc/php/7.0/cli/conf.d/20-pdo_mysql.ini,
/etc/php/7.0/cli/conf.d/20-pdo_sqlite.ini,
/etc/php/7.0/cli/conf.d/20-phar.ini,
/etc/php/7.0/cli/conf.d/20-posix.ini,
/etc/php/7.0/cli/conf.d/20-readline.ini,
/etc/php/7.0/cli/conf.d/20-shmop.ini,
/etc/php/7.0/cli/conf.d/20-simplexml.ini,
/etc/php/7.0/cli/conf.d/20-sockets.ini,
/etc/php/7.0/cli/conf.d/20-sqlite3.ini,
/etc/php/7.0/cli/conf.d/20-sysvmsg.ini,
/etc/php/7.0/cli/conf.d/20-sysvsem.ini,
/etc/php/7.0/cli/conf.d/20-sysvshm.ini,
/etc/php/7.0/cli/conf.d/20-tokenizer.ini,
/etc/php/7.0/cli/conf.d/20-wddx.ini,
/etc/php/7.0/cli/conf.d/20-xmlreader.ini,
/etc/php/7.0/cli/conf.d/20-xmlwriter.ini,
/etc/php/7.0/cli/conf.d/20-xsl.ini,
/etc/php/7.0/cli/conf.d/20-zip.ini,
/etc/php/7.0/cli/conf.d/zend_extensions_psa.ini
I already know it's probably easily fixed when you know linux but I'm learning on the go and posses very little knowledge yet.
Could anyone assist me with the right commands?
Cheers
Locate where is your php.ini file by:
php -i | grep Configuration
Configuration File (php.ini) Path => /usr/local/etc/php/7.4
Loaded Configuration File => /usr/local/etc/php/7.4/php.ini
Open the php.ini file and remove the line:
extension=imagick.so
or change the line to a comment:
; extension=imagick.so
I was using this piece of php script in a application running under over XAMPP on my local machine:
$dom = new DomDocument();
$filename = "library.xml";
if (!$dom->load($filename))
die("Could not parse iTunes XML file: ".$filename);
Then i tried to move this application to a WampServer without success, with the following warning:
Warning: DOMDocument::load() [domdocument.load]: I/O warning : failed to load external entity "file:///C:/wamp/www/parser/library.xml" in C:\wamp\www\parser\includes\libs\itunes_xml_parser.lib.php on line 111
This line in the error is exactly the load line, which worked flawlessly in earlier versions of XAMPP and isn't working now on XAMPP 1.7.7
As per this why don't you try using an absolute path for your filepath.
Also i see that this php file is located at C:\wamp\www\parser\includes\libs and library.xml is being searched at C:/wamp/www/parser/. Is this correct?
It could also be possible that you had turned off warnings/errors in your earlier xampp installation.So check this also.
I try to config xdebug but doesn't work I use:
XAMPP 1.7.4 , Netbeans 7.0
Xdebug installed: 2.1.0rc1
Server API: Apache 2.0 Handler
Windows: yes - Compiler: MS VC6 - Architecture: x86
Zend Server: no
PHP Version: 5.3.5
Zend API nr: 220090626
PHP API nr: 20090626
Debug Build: no
Thread Safe Build: yes
Configuration File Path: C:\WINDOWS
Configuration File: C:\xampp\php\php.ini
Extensions directory: C:\xampp\php\ext
And php.ini:
zend_extension = "C:\xampp\php\ext\php_xdebug.dll"
xdebug.collect_includes = 1
xdebug.collect_params = 1
xdebug.collect_return = 1
xdebug.default_enable = 1
xdebug.extended_info = 1
xdebug.profiler_append = 0
xdebug.profiler_enable = 1
xdebug.profiler_enable_trigger = 0
xdebug.profiler_output_dir = "C:\xampp\tmp"
xdebug.remote_autostart = 1
xdebug.remote_enable = 1
xdebug.remote_handler = "DBGp"
xdebug.remote_host = "localhost"
xdebug.remote_port = 9000
Now the problems:
Menu attach Debugger is still disabled or grayed out.
When I try to debug the break point is never hit. Scripts run like a normal.
Following is the URL of I get when I click Debug main project:
http://localhost/index.php?XDEBUG_SESSION_START=netbeans-xdebug
When I close the browser debugger does not stop. It shows the waiting for connection status.
When I click the stop debugging button in NetBeans gives a messagebox There is no connection from xdebug detected with in some seconds xdebug is not configured or xdebug is not installed.
Please guide me to resolve the above mentioned issues and debug the project.
First are you able to see xdebug in http://localhost/xampp/index.php ? If NOT then probably you are NOT editing the right php.ini file? Seems like XAMPP is using the php.ini file in:
c:\xampp\apache\bin\php.ini
Enter your configuration for xdebug in that file, restart Apache and you should be able to connect.
There was no need for me to change anything in Netbeans to get it to work.
Screenshots here: http://rudyegenias.wordpress.com/2011/07/03/xampp-xdebug-xdebug-not-showing-in-phpinfo/
? to use XDebug on Netbeans & XAMPP
use http://xdebug.org/wizard.php to inspect your system and download best xdebug.dll
place that .dll in C:/xampp/php/ext
edit C:/xampp/php/php.ini adding following
[XDebug]
zend_extension = C:\xampp\php\ext\php_xdebug-2.2.3-5.5-vc11.dll
xdebug.remote_enable=on
xdebug.remote_handler=dbgp
xdebug.remote_host=localhost
xdebug.remote_port=9000
xdebug.show_local_vars=on
xdebug.output_buffering=off
restart Apache web server
I've struggled with a lot of other setting but this is best to do the job