This question already has answers here:
distance between android and iphone
(2 answers)
Closed 9 years ago.
I know nexus 7's have bluetooth 4.0 but what I was wondering if you could use bluetooth 4.0 LE to calculate the distance between two devices? I want a very accurate distance calculator between two devices. I asked earlier about an android and an iphone but I am now only concerned with 2 android devices.
No. Bluetooth LE isn't some kind of magic hi-res GPS, it's basically just bluetooth data transfer using lower-powered transmitters.
Distance to the other device affects signal strength, but so do a bunch of other things. It's like trying to use a WiFi signal analyzer to measure the distance to a wifi hotspot. (Try it. You won't have much success!)
Look at the rather over-hyped Hone Keyfinder: The only thing it can tell you is if you're getting closer or further away from your keys. The keys don't know where the phone is, and the phone doesn't know where the keys are.
iBeacon works by having beacons at fixed lat/long, with a low-power transmitter. They broadcast their lat/long, so if you're in range of one, you know where you are. If you have enough beacons near you, you can triangulate based on relative signal strength. iOS devices acting as 'beacons' only makes sense if somehow they have better GPS coverage than you do.
I know some basic about iOS programming, now i want to connect my app to another non iphone device e.g. connecting to a bluetooth device that can control a light bulb on and off, or control any furnitures.
My question is, besides iOS xcode, what kind of program i need to learn in order to achieve my goal?
Is there any sources that i can learn from it?
For Bluetooth Low Energy devices, you can use the CoreBluetooth framework to access them.
For Classic Bluetooth devices or accessories that make use of the Dock connector, the protocols are not open, and joining the Made for iPhone (MFi) program is required. I do not suggest this for beginning.
My suggestion is to buy for example a Polar Heart Rate Belt that supports Bluetooth Low Energy. These use standard protocols. Sample code is available from Apple that shows how to read out the heart rate from such a device.
As soon as you have mastered the heart rate monitor example, a next step would be to acquire a programmable Bluetooth Low Energy chip (however, often, the development tools for those are rather expensive!). Those chips can be programmed with custom profiles to listen for Bluetooth Low Energy connections and then performing defined operations (lighting a LED) when writes to characteristics occur. So, you are not limited to heart rate monitors and similar devices.
Keywords that you can search for: GATT protocol, Bluetooth Low Energy, CoreBluetooth.
I know that it's a steep learning curve for beginners, but the area is pretty new. However, I can assure you that it's a fun area.
I also think that you should look in to embedded C programming for the slave device (Heart Rate Monitor)
You could get a tod Smart Beacon Development kit for ~$150 and then use BGScript to code the firmware to control the BLE device from your phone or pc. todhq.com for more info.
I would like to develop an app using iOS gamekit library and I am curious to know what the maximum range is between the two devices. How far can they stay connected and communicating?
Thanks!
I think you should go check the bluetooth and wi-fi specs, rather than thinking that the GK decides how far you can play:)
Would it be possible to fill a building with 20 - 30 bluetooth devices that act as proximity detectors and write an app that can calculate location in the building based on distance from the current detected sensors.
I've looked at the GameKit API, but I don't see anything about calculating distance from devices.
Can someone point me in the direction of an Apple API, or a 3rd party API that can be used for this kind of application.
We don't get the low level BlueTooth or WiFi control that would be required to do this. So unless you jailbreak you can't.
Low level Bluetooth can provide RSSI and Trasmit power level at the maximum for any kind of proximity indications.
As I understand it is extremely difficult to calculate the distance from these reliably.
Location services is surprisingly good at estimating location even in a residential area with only secured wireless APs detectable. But how you would add your APs into that DB, I don't know.
Does anyone know what kind of range can you get from the iPhone
bluetooth? Also, would the connection be strictly one to one? I know you
can choose from a number of peers to connect to but once the connection
is established, it seems you can only transfer data between one peer? So
basically, is it possible to create some kind of "multiplayer" experience?
Just answering the range part of your question...
The 10 meter figure for class 2 devices (of which the iPhone is an example) is very much a guideline.
The range of a Bluetooth device is limited by many real world factors. The 2.4 GHz radio frequency used by Bluetooth is strongly absorbed by water. For example, consider an iPhone connected to a Bluetooth mono headset. If the headset is in one ear and the iPhone is in your trouser pocket on the opposite side of your body, then there's a lot of water between the two devices. This will often cause a significant amount of packet loss in practice (you can hear this in the audio being carried). So, in this case, the range is about one meter.
At the opposite extreme, two class 2 devices separated by nothing more than clear air can get ranges of hundreds of meters.
Other factors that influence things are:
Interference - Lots of things use 2.4 GHz. WiFi, for example can cause problems.
Antenna design - Space and cost constraints often mean that the antenna design is sub-optimal. I don't know how good the iPhone is in this respect.
Walls - Generally walls attenuate Bluetooth signals. However, sometimes they are useful reflectors.
Quality of hardware - Some chips work better than others. Even different firmware revisions of the same chip may perform differently. Different versions of the iPhone probably have (or will have) different chips in them.
Protocol - It is possible to work around poor signal quality with error correction and retransmission. Even if the iPhone SDK forces you to use a particular protocol, careful design of your application can make a difference.
So, in summary, you should probably do some real world tests.
The connection is one-to-one, but you can create an adhoc network with one of the phones acting as the master/coordinator. The other phones would route all their communication through the master/coordinator.
One device can theoretically connect to 7 devices. according to the master-slave role, the device can multiplex between each of them giving the user an impression that you are connected to all of them simultaneously. Bluetooth specification does not stop you from doing that.This is theory.
Now for the iphone, whether it can connect to to more than one device can only be answered by apple or someone who knows the iphone bluetooth API. But I am pretty sure the bluetooth chip inside iphone should be able to connect to more than one device.
Range is essentially going to be good enough for a normal sized room to be covered. It can be longer or shorter depending on environmental circumstances, but remember that bluetooth was created to implement short range connections.
A bluetooth device can be part of a piconet of eight devices, one master and up to seven slaves. The slaves cannot communicate with each other, they must talk through the master, think of a star topology with the master in the center. The iPhone SDK has a GameKit framework that can be used to create the network for multiplayer games. Go to developer.apple.com at look at the GKTank and GKRocket sample code to see how it's used. These games only support two players, but the GameKit framework supports more. Look at the app store and you will see games that have four or more players.
Hope this helps to get started.
Apple iPhone 3G has a Class 2 bluetooth module. Class 2 Bluetooth devices have a communication range of 10 meters.
At a given instance a device can connect to just one device because it follows a master/slave communication model. But still we can perform a multiplexing. So we can virtually connect to more than 1 device and by rapidly changing the connected device.
I found a good article here. It explains bluetooth very well.
According to the my knowledge, multicasting is not impossible with bluetooth. So gaining a multiplayer experience is NOT impossible.
The bluetooth in the iPhone is Class-2, with a 10-meter range, approximately.
Unfortunately I can't answer the other parts of your question.
One device can be connected up to 8 others. It all depends on the iPhone bluetooth API (which I don't know anything about), but with Bluetooth itself you could then send data to multiple devices.
I tether my iPhone to my laptop over bluetooth every day, and I seem to remember having done that at the same time as using a bluetooth headset. YMMV.
It’s the latest incarnation of Bluetooth, the wireless device-to-device technology that allows your phone to talk to headsets, car stereos, keyboards and other devices directly, without the need for a router or shared wireless network.