I need to add some text before a pattern.
I know how can I add after the pattern.
sed -i '/pattern/aNew Text' input_file
But how to do it for adding the 'New Text' before the pattern.
The command to insert before is i
sed -i '/pattern/iNew Text' input_file
This command insert what you want before the line that matches your pattern, but if you want to insert something before the match itself, use a replacement with a capture group.
Related
I want to extract strings between two patterns with GREP, but when no match is found, I would like to print a blank line instead.
Input
This is very new
This is quite old
This is not so new
Desired Output
is very
is not so
I've attempted:
grep -o -P '(?<=This).*?(?=new)'
But this does not preserve the second blank line in the above example. Have searched for over an hour, tried a few things but nothing's worked out.
Will happily used a solution in SED if that's easier!
You can use
#!/bin/bash
s='This is very new
This is quite old
This is not so new'
sed -En 's/.*This(.*)new.*|.*/\1/p' <<< "$s"
See the online demo yielding
is very
is not so
Details:
E - enables POSIX ERE regex syntax
n - suppresses default line output
s/.*This(.*)new.*|.*/\1/ - finds any text, This, any text (captured into Group 1, \1, and then any text again, or the whole string (in sed, line), and replaces with Group 1 value.
p - prints the result of the substitution.
And this is what you need for your actual data:
sed -En 's/.*"user_ip":"([^"]*).*|.*/\1/p'
See this online demo. The [^"]* matches zero or more chars other than a " char.
With your shown samples, please try following awk code.
awk -F'This\\s+|\\s+new' 'NF==3{print $2;next} NF!=3{print ""}' Input_file
OR
awk -F'This\\s+|\\s+new' 'NF==3{print $2;next} {print ""}' Input_file
Explanation: Simple explanation would be, setting This\\s+ OR \\s+new as field separators for all the lines of Input_file. Then in main program checking condition if NF(number of fields) are 3 then print 2nd field (where next will take cursor to next line). In another condition checking if NF(number of fields) is NOT equal to 3 then simply print a blank line.
sed:
sed -E '
/This.*new/! s/.*//
s/.*This(.*)new.*/\1/
' file
first line: lines not matching "This.*new", remove all characters leaving a blank line
second lnie: lines matching the pattern, keep only the "middle" text
this is not the pcre non-greedy match: the line
This is new but that is not new
will produce the output
is new but that is not
To continue to use PCRE, use perl:
perl -lpe '$_ = /This(.*?)new/ ? $1 : ""' file
This might work for you:
sed -E 's/.*This(.*)new.*|.*/\1/' file
If the first match is made, the line is replace by everything between This and new.
Otherwise the second match will remove everything.
N.B. The substitution will always match one of the conditions. The solution was suggested by Wiktor Stribiżew.
I have a .yaml in which:-
value: "this is the whole line with this text -Djavax.net.ssl.keyStorePassword and the line continuous"
I want to delete only -Djavax.net.ssl.keyStorePassword but it removes whole value: section
You can use sed to find and replace a string in your file.
See also: https://unix.stackexchange.com/questions/159367/using-sed-to-find-and-replace#159369
The code your your case would look like:
sed -i -e 's/-Djavax.net.ssl.keyStorePassword//g' filename.yaml
This makes sed to replace your string with an empty string.
The /s option is used to find a substring in a file. Place the string to replace it with after the next /. /g in the end makes sed to copy that string to your file.
See https://linux.die.net/man/1/sed
I'm very much a junior when it comes to the sed command, and my Bruce Barnett guide sits right next to me, but one thing has been troubling me. With a file, can you filter it using sed to select only specific items? For example, in the following file:
alpha|november
bravo|october
charlie|papa
alpha|quebec
bravo|romeo
charlie|sahara
Would it be possible to set a command to return only the bravos, like:
bravo|october
bravo|romeo
With sed:
sed '/^bravo|/!d' filename
Alternatively, with grep (because it's sort of made for this stuff):
grep '^bravo|' filename
or with awk, which works nicely for tabular data,
awk -F '|' '$1 == "bravo"' filename
The first two use a regular expression, selecting those lines that match it. In ^bravo|, ^ matches the beginning of the line and bravo| the literal string bravo|, so this selects all lines that begin with bravo|.
The awk way splits the line across the field separator | and selects those lines whose first field is bravo.
You could also use a regex with awk:
awk '/^bravo|/' filename
...but I don't think this plays to awk's strengths in this case.
Another solution with sed:
sed -n '/^bravo|/p' filename
-n option => no printing by default.
If line begins with bravo|, print it (p)
2 way (at least) with sed
removing unwanted line
sed '/^bravo\|/ !d' YourFile
Printing only wanted lines
sed -n '/^bravo\|/ p' YourFile
if no other constraint or action occur, both are the same and a grep is better.
If there will be some action after, it could change the performance where a d cycle directly to the next line and a p will print then continue the following action.
Note the escape of pipe is needed for GNU sed, not on posix version
I'm having issues matching strings even if they start with any number of white spaces. It's been very little time since I started using regular expressions, so I need some help
Here is an example. I have a file (file.txt) that contains two lines
#String1='Test One'
String1='Test Two'
Im trying to change the value for the second line, without affecting line 1 so I used this
sed -i "s|String1=.*$|String1='Test Three'|g"
This changes the values for both lines. How can I make sed change only the value of the second string?
Thank you
With gnu sed, you match spaces using \s, while other sed implementations usually work with the [[:space:]] character class. So, pick one of these:
sed 's/^\s*AWord/AnotherWord/'
sed 's/^[[:space:]]*AWord/AnotherWord/'
Since you're using -i, I assume GNU sed. Either way, you probably shouldn't retype your word, as that introduces the chance of a typo. I'd go with:
sed -i "s/^\(\s*String1=\).*/\1'New Value'/" file
Move the \s* outside of the parens if you don't want to preserve the leading whitespace.
There are a couple of solutions you could use to go about your problem
If you want to ignore lines that begin with a comment character such as '#' you could use something like this:
sed -i "/^\s*#/! s|String1=.*$|String1='Test Three'|g" file.txt
which will only operate on lines that do not match the regular expression /.../! that begins ^ with optional whiltespace\s* followed by an octothorp #
The other option is to include the characters before 'String' as part of the substitution. Doing it this way means you'll need to capture \(...\) the group to include it in the output with \1
sed -i "s|^\(\s*\)String1=.*$|\1String1='Test Four'|g" file.txt
With GNU sed, try:
sed -i "s|^\s*String1=.*$|String1='Test Three'|" file
or
sed -i "/^\s*String1=/s/=.*/='Test Three'/" file
Using awk you could do:
awk '/String1/ && f++ {$2="Test Three"}1' FS=\' OFS=\' file
#String1='Test One'
String1='Test Three'
It will ignore first hits of string1 since f is not true.
How can I replace a word at a line which begins with a specific pattern on FreeBSD?
Consider the following file contents:
this is to test
that was for test
I want to replace "test" at the line which begins with "this".
In order to perform a replacement for lines starting with this, say:
$ sed '/^this/ s/test/something/' inputfile
this is to something
that was for test
This would replace the word test with something on lines starting with this.
If you want to replace all instances of test on the matching lines, supply the g option to sed:
sed '/^this/ s/test/something/g' inputfile
To make the changes in-place, use the below command:
sed -i '/^this/ s/test/something/g' inputfile;