On an AIX test system, I would like to insert some data to a file at certain line. I have tried using sed command sed "5i some_data" somefile.txt but failed. Any suggestions?
sed is better for editing streams; you can use a scriptable text editor on files. Example with ed or ex:
ed somefile.txt <<EOE
5i
some data
.
wq
EOE
That breaks down what is happening more explicitly.
AIX sed is strict in requiring a newline with the i function:
cp somefile.txt somefile.txt.orig
sed '5i\
some_data' somefile.txt.orig > somefile.txt
Where the standard indicates:
[1addr]i\
text
Write text to standard output.
Related
I'm trying to add the filename of a text file into the first line of a the same text file. for example if the file name is called test1.txt, then the first line when you open the file should be test1.
below is what I've done so for, the only problem i have is that the word "$file" is being written to the file not the file name. any help is appreciated.
for file in *.txt; do
sed -i '1 i\$file' $file;
awk 'sub("$", "\r")' "$file" > "$file"1;
mv "$file"1 "$file";
done
Without concise, testable sample input and expected output it's an untested guess but it SOUNDS like all you need is:
awk -i inplace -v ORS='\r\n' 'FNR==1{print FILENAME}1' *
No shell loop or multiple commands required.
The above uses GNU awk for inplace editing and I'm assuming the sub() in your code was intended to add a \r at the end of every line.
I've just started learning more about sed and awk and put this into a file called insert.sed and sourced it and passed it a file name:
sed -i '1s/^./'$1'\'$'\n/g' $1
In trying it, it seems to work okay:
rent$ cat x.txt
<<< Who are you?
rent$ source insert.sed x.txt
rent$ cat x.txt
x.txt
<< Who are you?
It is cutting off the first character of the first line so I'd have to fix that otherwise it does add the file name to first line.
I'm sure there's better ways of doing it.
If you want test1 on first line, with gnu sed
sed -i '1{x;s/.*/fich=$(ps -p $PPID -o args=);fich=${fich##*\\} };echo ${fich%%.*}/e;G}' test1.txt
I want to add a string to file at certain line number in Linux. I searched and found a command like:
sed "5i helloworld" test.txt
to add helloworld at line 5, but I got an error:
sed: command garbled.
I am testing in RedHat here. Is there any other command I can use here? Any other ways?
Older seds are a bit pickier with how you type commands like i, a and c. Try an actual line continuation:
sed '5i\
helloworld' test.txt
The i text syntax is a GNU extension. POSIX sed only know about the i\ version with linebreak.
Also, notice that there is a difference between the sed i command1 (insert text) and the -i option (in-place editing).
1 Or "function".
Here is awk solution:
awk 'NR==5{1;print "Hey there this is new text added on line 5"}1' inputfile
I've been at this most of this afternoon hacking with sed and it's a bit of a minefield.
I have a file of hex of the form:
485454502F312E31203230300D0A0D0AFFD8FFE000104A46494600
I'm pattern matching on 0D0A0D0A and have managed to delete the contents from the start of the file to there. The problem is that it leaves the 0D0A0D0A, so I have to do a second pass to pick that up.
Is there a way in one command to delete up to and including the pattern that you match to and save it back into the same file ?
thanks in advance.
ID
This should work:
sed -e 's/.*0D0A0D0A//' file.txt
You need to provide better description of your problem.
Based on what you wrote you can use -i switch (Edit files in-place) of sed to save the changed file:
sed -i.bak 's/^.*0D0A0D0A//' file
PS: On posix and on some older versions of sed doesn't have -i switch available. If that's the case use it like this:
sed 's/^.*0D0A0D0A//' file > _temp && mv _temp file
I'm on Linux command line and I have file with
127.0.0.1
128.0.0.0
121.121.33.111
I want
127.0.0.1:80
128.0.0.0:80
121.121.33.111:80
I remember my colleagues were using sed for that, but after reading sed manual still not clear how to do it on command line?
You could try using something like:
sed -n 's/$/:80/' ips.txt > new-ips.txt
Provided that your file format is just as you have described in your question.
The s/// substitution command matches (finds) the end of each line in your file (using the $ character) and then appends (replaces) the :80 to the end of each line. The ips.txt file is your input file... and new-ips.txt is your newly-created file (the final result of your changes.)
Also, if you have a list of IP numbers that happen to have port numbers attached already, (as noted by Vlad and as given by aragaer,) you could try using something like:
sed '/:[0-9]*$/ ! s/$/:80/' ips.txt > new-ips.txt
So, for example, if your input file looked something like this (note the :80):
127.0.0.1
128.0.0.0:80
121.121.33.111
The final result would look something like this:
127.0.0.1:80
128.0.0.0:80
121.121.33.111:80
Concise version of the sed command:
sed -i s/$/:80/ file.txt
Explanation:
sed stream editor
-i in-place (edit file in place)
s substitution command
/replacement_from_reg_exp/replacement_to_text/ statement
$ matches the end of line (replacement_from_reg_exp)
:80 text you want to add at the end of every line (replacement_to_text)
file.txt the file name
How can this be achieved without modifying the original file?
If you want to leave the original file unchanged and have the results in another file, then give up -i option and add the redirection (>) to another file:
sed s/$/:80/ file.txt > another_file.txt
sed 's/.*/&:80/' abcd.txt >abcde.txt
If you'd like to add text at the end of each line in-place (in the same file), you can use -i parameter, for example:
sed -i'.bak' 's/$/:80/' foo.txt
However -i option is non-standard Unix extension and may not be available on all operating systems.
So you can consider using ex (which is equivalent to vi -e/vim -e):
ex +"%s/$/:80/g" -cwq foo.txt
which will add :80 to each line, but sometimes it can append it to blank lines.
So better method is to check if the line actually contain any number, and then append it, for example:
ex +"g/[0-9]/s/$/:80/g" -cwq foo.txt
If the file has more complex format, consider using proper regex, instead of [0-9].
You can also achieve this using the backreference technique
sed -i.bak 's/\(.*\)/\1:80/' foo.txt
You can also use with awk like this
awk '{print $0":80"}' foo.txt > tmp && mv tmp foo.txt
Using a text editor, check for ^M (control-M, or carriage return) at the end of each line. You will need to remove them first, then append the additional text at the end of the line.
sed -i 's|^M||g' ips.txt
sed -i 's|$|:80|g' ips.txt
sed -i 's/$/,/g' foo.txt
I do this quite often to add a comma to the end of an output so I can just easily copy and paste it into a Python(or your fav lang) array
We have a process which can use a file containing sed commands to alter piped input.
I need to replace a placeholder in the input with a variable value, e.g. in a single -e type of command I can run;
$ echo "Today is XX" | sed -e "s/XX/$(date +%F)/"
Today is 2012-10-11
However I can only specify the sed aspects in a file (and then point the process at the file), E.g. a file called replacements.sed might contain;
s/XX/Thursday/
So obviously;
$ echo "Today is XX" | sed -f replacements.sed
Today is Thursday
If I want to use an environment variable or shell value, though, I can't find a way to make it expand, e.g. if replacements.txt contains;
s/XX/$(date +%F)/
Then;
$ echo "Today is XX" | sed -f replacements.sed
Today is $(date +%F)
Including double quotes in the text of the file just prints the double quotes.
Does anyone know a way to be able to use variables in a sed file?
This might work for you (GNU sed):
cat <<\! > replacements.sed
/XX/{s//'"$(date +%F)"'/;s/.*/echo '&'/e}
!
echo "Today is XX" | sed -f replacements.sed
If you don't have GNU sed, try:
cat <<\! > replacements.sed
/XX/{
s//'"$(date +%F)"'/
s/.*/echo '&'/
}
!
echo "Today is XX" | sed -f replacements.sed | sh
AFAIK, it's not possible. Your best bet will be :
INPUT FILE
aaa
bbb
ccc
SH SCRIPT
#!/bin/sh
STRING="${1//\//\\/}" # using parameter expansion to prevent / collisions
shift
sed "
s/aaa/$STRING/
" "$#"
COMMAND LINE
./sed.sh "fo/obar" <file path>
OUTPUT
fo/obar
bbb
ccc
As others have said, you can't use variables in a sed script, but you might be able to "fake" it using extra leading input that gets added to your hold buffer. For example:
[ghoti#pc ~/tmp]$ cat scr.sed
1{;h;d;};/^--$/g
[ghoti#pc ~/tmp]$ sed -f scr.sed <(date '+%Y-%m-%d'; printf 'foo\n--\nbar\n')
foo
2012-10-10
bar
[ghoti#pc ~/tmp]$
In this example, I'm using process redirection to get input into sed. The "important" data is generated by printf. You could cat a file instead, or run some other program. The "variable" is produced by the date command, and becomes the first line of input to the script.
The sed script takes the first line, puts it in sed's hold buffer, then deletes the line. Then for any subsequent line, if it matches a double dash (our "macro replacement"), it substitutes the contents of the hold buffer. And prints, because that's sed's default action.
Hold buffers (g, G, h, H and x commands) represent "advanced" sed programming. But once you understand how they work, they open up new dimensions of sed fu.
Note: This solution only helps you replace entire lines. Replacing substrings within lines may be possible using the hold buffer, but I can't imagine a way to do it.
(Another note: I'm doing this in FreeBSD, which uses a different sed from what you'll find in Linux. This may work in GNU sed, or it may not; I haven't tested.)
I am in agreement with sputnick. I don't believe that sed would be able to complete that task.
However, you could generate that file on the fly.
You could change the date to a fixed string, like
__DAYOFWEEK__.
Create a temp file, use sed to replace __DAYOFWEEK__ with $(date +%Y).
Then parse your file with sed -f $TEMPFILE.
sed is great, but it might be time to use something like perl that can generate the date on the fly.
To add a newline in the replacement expression using a sed file, what finally worked for me is escaping a literal newline. Example: to append a newline after the string NewLineHere, then this worked for me:
#! /usr/bin/sed -f
s/NewLineHere/NewLineHere\
/g
Not sure it matters but I am on Solaris unix, so not GNU sed for sure.