I translated few words before with Translate inline but now I would like to remove those inline translations.
Is it possible to remove it?
Inline translations are stored in the database. The table is translation. Just look up the entries you want to remove and do so. Don't forget to flush your cache afterwards to see the changes.
Related
We have two word documents, one that is used for as an order template and another that is our terms and conditions (T&C).
We would like to merge both documents into one without breaking the styling and have not been able to do so even with quite a considerable amount of effort.
Essentially, the T&C document has a bunch custom styles some of which overlap with the default word styles. This means that when copy pasting the T&C document into the order template, the result is a complete mess.
Is there a way of combining the two word files while maintaining the existing format (we would like the T&C to be copied into the Word document and not the other way around).
I have tried using the following Macro (found online) to remove the styles of the T&C document and maintain the format:
Sub DirectFormat()
Dim para As Paragraph
Dim fnt As Font
Dim pfmt As ParagraphFormat
For Each para In ActiveDocument.Paragraphs
With para
If .Style <> ActiveDocument.Styles("Normal") Then
Set fnt = .Style.Font
Set pfmt = .Style.ParagraphFormat
.Style = ActiveDocument.Styles("Normal")
.Range.Font = fnt
.Range.ParagraphFormat = pfmt
End If
End With
Next
End Sub
However after running it, the document looks completely different.
The simplest and most effective way is to ensure you don't have conflicting Style definitions and that the Style definitions in the source document, especially, haven't been overridden with direct formatting.
Other than that, instead of using copy/paste for content replication, you might use something like:
wdRngTgt.FormattedText = wdRngSrc.FormattedText
where wdRngTgt defines the destination range and wdRngSrc defines the source range.
I would like to prevent the files promoted to an Accurev stream which have spaces in the file name.
e.g.
My image.png
If anybody tries to keep / promote the above file, I would like to prevent that.
You would need to add this logic into the server_preop_trig. You will add it to both the keep and promote sections of the trigger.
I do not normally work with crystal, but I have spent nearly 2 days looking for a way to do this.
The problem is that I have a number of lines of text that need to show on a report, but need to cut off after 8 lines and show a 'more' prompt to inform the user that they need to go look at the rest of the details online. This was originally handled by storing the data as individual lines already wrap to size and counting the lines with a formula and conditionally showing a separate 'more' field. They have since added the ability to use html to the text, but this made the current way of doing things wrap incorrectly and show the html mark up.
I wrote a database function to combine the text into a single field and use the HTML text interpretation to display it correctly on 7 other reports that do not limit the text length, and the max line count works great for limiting the text size, I just can't figure out how to show the 'more' prompt when needed.
Any suggestions would be greatly appreciated.
GrumpyGeek,
If your database function now combines the text into a single field does this mean the original way, with the separated lines, is still stored? If so, why not add another calculated field called 'line-count' that tallies the old line-based data?
So you'd still have your new combined HTML field and this new field that you could use to show the 'more' button when 'line-count > x'?
Alternatively, another option might work, but would be a bit touchy. That is to make the formula that shows the more button trigger when the field length exceeds x. The catch is that html mark-up isn't displayed, and heavy use of it would skew the amount of text required before you should show the 'more' button. Put another way, a field with very heavy use of mark-up ( and tags) might force the 'more' button earlier than it should. Unless you could somehow make either your 'line-count' calculated field exclude the mark-up OR make the length calculation do the same.
This would be possible if MSSQL or Crystal Reports could run regex to strip the mark-up.
If NONE of the above works, the only other thing I can suggest is to look into UDFs. Crystal allows you to load an external library that you write. These will read functions you write and show them in the function list inside Crystal. If you do this, then you could easily write a routine that strips the HTML and calculates when the more button should be shown.
Good luck with it.
Ideally, there would be a property of the DB field that would return its displayed line count. Unfortunately, there is no such property.
You could try counting the # of line ending characters (e.g. carriage return, line feed). If they are > 7 then show the hyperlink. In a HTML situation, you have to count ending elements (e.g. ). You could make use of a RegEx UFL to make it easier to identify the elements.
Probably the easiest route is to the DB to calculate the # of lines and return that as another field. Use this field to hide/show the hyperlink.
I want to automate some writer tasks. I need to create a .odt writer
document with oo:doc using methods such as create paragraph and append
paragraph. The problem is that append paragraph and create paragraph does not
allow text to start at middle of page or at a certain column, ie
Name Surname Address
When I unzip the "master" document I want to to create, when I inspect the content.xml file i see the xml equivalent is
" <text:p text:style-name="Text_20_body"><text:s text:c="115"/><text:span text:style-name="T1"><text:s/>Hallo how are you today</text:span></text:p><text:p text:style-name="P1"><text:s text:c="116"/>I hope you are well also</text:p><text:p text:style-name="P1""
How do I set the text:c and text:s element(s) from within oo::doc
Question2:
How do i set the formatting of a paragraph
to only extend from ie column 20 to column 80
thanks
Those elements are for runs of non-breaking spaces. the text:c attribute says how many spaces there are.
That doesn't strike me as a solution to what you want, which is to change the margins and position of a paragraph, yes?
Do you have a document that you want to use as a template, where the text will be inserted? Or ar you trying to create the entire page from scratch?
I think you want to use OpenOffice.org to create a Writer document that has the structure you want, then look at the XML to see what the markup is that accomplishes that. Look at paragraph-level styles or even frames if that is what is used. You might be able to create insertion points for your generated content by then adding magic-text phrases that you can scan for.
Then figure out how to get that done with the perl module.
I have some documents that contain sequences such as radio/tested that I would like to return hits in queries like
select * from doc
where to_tsvector('english',body) ## to_tsvector('english','radio')
Unfortunately, the default parser takes radio/tested as a file token (despite being in a Windows environment), so it doesn't match the above query. When I run ts_debug on it, that's when I see that it's being recognized as a file, and the lexeme ends up being radio/tested rather than the two lexemes radio and test.
Is there any way to configure the parser not to look for file tokens? I tried
ALTER TEXT SEARCH CONFIGURATION public.english
DROP MAPPING FOR file;
...but it didn't change the output of ts_debug. If there's some way of disabling file, or at least having it recognize both file and all the words that it thinks make up the directory names along the way, or if there's a way to get it to treat slashes as hyphens or spaces (without the performance hit of regexp_replaceing them myself) that would be really helpful.
I think the only way to do what you want is to create your own parser :-( Copy wparser_def.c to a new file, remove from the parse tables (actionTPS_Base and the ones following it) the entries that relate to files (TPS_InFileFirst, TPS_InFileNext etc), and you should be set. I think the main difficulty is making the module conform to PostgreSQL's C idiom (PG_FUNCTION_INFO_V1 and so on). Have a look at contrib/test_parser/ for an example.