I am using the 2020-05 raspbian image and have headphones plugged-in to the raspberry pi 3b+.
Following this tutorial, I tried to test my sound with aplay /usr/share/sounds/alsa/* and heard "Front Center" with the following output
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
Playing WAVE '/usr/share/sounds/alsa/Front_Left.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
aplay: set_params:1403: Unable to install hw params:
ACCESS: RW_INTERLEAVED
FORMAT: S16_LE
SUBFORMAT: STD
SAMPLE_BITS: 16
FRAME_BITS: 16
CHANNELS: 1
RATE: 48000
PERIOD_TIME: 125000
PERIOD_SIZE: 6000
PERIOD_BYTES: 12000
PERIODS: 4
BUFFER_TIME: 500000
BUFFER_SIZE: 24000
BUFFER_BYTES: 48000
TICK_TIME: 0
Tutorial said
If you are able to hear the sounds like “Front Center”,”Front Left”, “Front Right” and so on, your sound is working!
What may be causing this error? I can pay each file by itself.
I moved to the next step and installed espeak and espeak "Hello World" did not play a sound and outputted
Expression 'alsa_snd_pcm_hw_params_set_period_size_near( pcm, hwParams, &alsaPeriodFrames, &dir )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 924
Expression 'alsa_snd_pcm_hw_params_set_period_size_near( pcm, hwParams, &alsaPeriodFrames, &dir )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 924
Expression 'alsa_snd_pcm_hw_params_set_period_size_near( pcm, hwParams, &alsaPeriodFrames, &dir )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 924
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.front
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround21
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround21
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround40
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround41
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround50
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround51
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround71
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.iec958
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.iec958
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.iec958
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'defaults.bluealsa.device'
ALSA lib conf.c:4568:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5036:(snd_config_expand) Args evaluate error: No such file or directory
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM bluealsa
ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'defaults.bluealsa.device'
ALSA lib conf.c:4568:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5036:(snd_config_expand) Args evaluate error: No such file or directory
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM bluealsa
Expression 'alsa_snd_pcm_hw_params_set_period_size_near( pcm, hwParams, &alsaPeriodFrames, &dir )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 924
ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM input
Expression 'alsa_snd_pcm_hw_params_set_period_size_near( pcm, hwParams, &alsaPeriodFrames, &dir )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 924
Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
Expression 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048
Expression 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722
Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843
wave_open_sound > Pa_OpenStream : err=-9997 (Invalid sample rate)
Expression 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048
Expression 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722
Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843
Expression 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048
Expression 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722
Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843
wave_open_sound > Pa_OpenStream : err=-9997 (Invalid sample rate)
Expression 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048
Expression 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722
Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843
Expression 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048
Expression 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722
Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843
wave_open_sound > Pa_OpenStream : err=-9997 (Invalid sample rate)
Expression 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048
Expression 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722
Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843
Expression 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048
Expression 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722
Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843
wave_open_sound > Pa_OpenStream : err=-9997 (Invalid sample rate)
Expression 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048
Expression 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722
Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843
Expression 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048
Expression 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722
Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843
wave_open_sound > Pa_OpenStream : err=-9997 (Invalid sample rate)
Expression 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048
Expression 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722
Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843
Expression 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048
Expression 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722
Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843
wave_open_sound > Pa_OpenStream : err=-9997 (Invalid sample rate)
Expression 'paInvalidSampleRate' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2048
Expression 'PaAlsaStreamComponent_InitialConfigure( &self->playback, outParams, self->primeBuffers, hwParamsPlayback, &realSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2722
Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843
Are these problems related?
I am not asking for a step by step tutorial to solve these problems. I am just stuck on where to start to troubleshoot them.
Related
I have a JPG image in a directory that I update each time I got a new one and I have to send this image to a rtmp server.
I fond that ffmpeg can do that but I thougt -loop 0 is suppose to loop over the image and see if it is refreshed but when I start my command inside my app it seem to start well and end with good Return Code (0) but don't seem to loop.
Here is my ffmpeg command : '-re -loop 0 -i $pathToFile -preset ultrafast -tune zerolatency -c:v libx264 -f flv $streamUrl'
This code execute the command :
FFmpegKit.executeAsync(command, (session) async {
if (ReturnCode.isSuccess(await session.getReturnCode())) {
log('FFmpeg process exited with rc ${await session.getReturnCode()} in ${await session.getDuration()} milliseconds');
} else if (ReturnCode.isCancel(await session.getReturnCode())) {
log('FFmpeg process cancelled');
} else {
log('FFmpeg process failed with rc ${await session.getReturnCode()} in ${await session.getReturnCode()} milliseconds');
}
}, (session) {
log('Message ${session.getMessage()}');
}, (session) {
log('Statistics ${session.toString()}');
});
And finally I got those logs :
[log] Message [libx264 # 0x7ccd0b6400] 264 - core 164 - H.264/MPEG-4 AVC codec - Copyleft 2003-2022 - http://www.videolan.org/x264.html - options: cabac=0 ref=1 deblock=0:0:0 analyse=0:0 me=dia subme=0 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=0 threads=7 lookahead_threads=7 sliced_threads=1 slices=7 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=250 keyint_min=25 scenecut=0 intra_refresh=0 rc=crf mbtree=0 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=0
[log] Message Output #0, flv, to 'rtmp://stream.stream.url.com':
[log] Message Metadata:
[log] Message encoder :
[log] Message Lavf59.27.100
[log] Message
[log] Message Stream #0:0
[log] Message : Video: h264 ([7][0][0][0] / 0x0007), yuvj422p(pc, bt470bg/unknown/unknown, progressive), 640x480, q=2-31
[log] Message ,
[log] Message 25 fps,
[log] Message 1k tbn
[log] Message
[log] Message Metadata:
[log] Message encoder :
[log] Message Lavc59.37.100 libx264
[log] Message
[log] Message Side data:
[log] Message
[log] Message cpb:
[log] Message bitrate max/min/avg: 0/0/0 buffer size: 0
[log] Message vbv_delay: N/A
[log] Message
[log] Statistics Instance of 'Statistics'
[log] Message frame= 1 fps=0.0 q=20.0 size= 21kB time=00:00:00.00 bitrate=173704.0kbits/s speed= 333x
[log] Message [flv # 0x7cf7f74d00] Failed to update header with correct duration.
[log] Message [flv # 0x7cf7f74d00] Failed to update header with correct filesize.
[log] Statistics Instance of 'Statistics'
[log] Message frame= 1 fps=0.0 q=20.0 Lsize= 21kB time=00:00:00.00 bitrate=173864.0kbits/s speed=0.0204x
[log] Message video:21kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 1.513382%
[log] Statistics Instance of 'Statistics'
[log] Message frame= 1 fps=0.0 q=20.0 Lsize=N/A time=00:00:00.00 bitrate=N/A speed=0.0204x
[log] Message video:21kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
[log] Message [libx264 # 0x7ccd0b6400] frame I:1 Avg QP:20.00 size: 20815
[log] Message [libx264 # 0x7ccd0b6400] mb I I16..4: 100.0% 0.0% 0.0%
[log] Message [libx264 # 0x7ccd0b6400] coded y,uvDC,uvAC intra: 37.5% 22.7% 2.3%
[log] Message [libx264 # 0x7ccd0b6400] i16 v,h,dc,p: 50% 14% 24% 12%
[log] Message [libx264 # 0x7ccd0b6400] i8c dc,h,v,p: 78% 6% 15% 1%
[log] Message [libx264 # 0x7ccd0b6400] kb/s:4163.00
[log] FFmpeg process exited with rc 0 in 562 milliseconds
All of this in inside a Flutter app with the package ffmpeg_kit_flutter (the full gpl version of it).
Any one have an idea of how to loop over constantly every time the image is updated ?
Edit : I try adding -f image2 in input but it failed with :
[log] Message ffmpeg version n5.1.2
[log] Message Copyright (c) 2000-2022 the FFmpeg developers
[log] Message
I/ink.kw_deliver(30445): WaitForGcToComplete blocked ProfileSaver on HeapTrim for 28.215ms
[log] Message built with Android (7155654, based on r399163b1) clang version 11.0.5 (https://android.googlesource.com/toolchain/llvm-project 87f1315dfbea7c137aa2e6d362dbb457e388158d)
[log] Message configuration: --cross-prefix=aarch64-linux-android- --sysroot=/files/android-sdk/ndk/22.1.7171670/toolchains/llvm/prebuilt/linux-x86_64/sysroot --prefix=/home/taner/Projects/ffmpeg-kit/prebuilt/android-arm64/ffmpeg --pkg-config=/usr/bin/pkg-config --enable-version3 --arch=aarch64 --cpu=armv8-a --target-os=android --enable-neon --enable-asm --enable-inline-asm --ar=aarch64-linux-android-ar --cc=aarch64-linux-android24-clang --cxx=aarch64-linux-android24-clang++ --ranlib=aarch64-linux-android-ranlib --strip=aarch64-linux-android-strip --nm=aarch64-linux-android-nm --extra-libs='-L/home/taner/Projects/ffmpeg-kit/prebuilt/android-arm64/cpu-features/lib -lndk_compat' --disable-autodetect --enable-cross-compile --enable-pic --enable-jni --enable-optimizations --enable-swscale --disable-static --enable-shared --enable-pthreads --enable-v4l2-m2m --disable-outdev=fbdev --disable-indev=fbdev --enable-small --disable-xmm-clobber-test --disable-debug --enable-lto --disable-neon-clobber-test --disable-programs --disable-postproc --disable-doc --disable-htmlpages --disable-manpages --disable-podpages --disable-txtpages --disable-sndio --disable-schannel --disable-securetransport --disable-xlib --disable-cuda --disable-cuvid --disable-nvenc --disable-vaapi --disable-vdpau --disable-videotoolbox --disable-audiotoolbox --disable-appkit --disable-alsa --disable-cuda --disable-cuvid --disable-nvenc --disable-vaapi --disable-vdpau --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-gmp --enable-gnutls --enable-libmp3lame --enable-libass --enable-iconv --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libxml2 --enable-libopencore-amrnb --enable-libshine --enable-libspeex --enable-libdav1d --enable-libkvazaar --enable-libx264 --enable-libxvid --enable-libx265 --enable-libvidstab --enable-libilbc --enable-libopus --enable-libsnappy --enable-libsoxr --enable-libtwolame --disable-sdl2 --enable-libvo-amrwbenc --enable-libzimg --disable-openssl --enable-zlib --enable-mediacodec --enable-gpl
[log] Message libavutil 57. 28.100 / 57. 28.100
[log] Message libavcodec 59. 37.100 / 59. 37.100
[log] Message libavformat 59. 27.100 / 59. 27.100
[log] Message libavdevice 59. 7.100 / 59. 7.100
[log] Message libavfilter 8. 44.100 / 8. 44.100
[log] Message libswscale 6. 7.100 / 6. 7.100
[log] Message libswresample 4. 7.100 / 4. 7.100
[log] Message Input #0, image2, from '/data/user/0/com.kwikwink.kw_delivery/cache/images/stream.jpg':
[log] Message Duration:
[log] Message 00:00:00.04
[log] Message , start:
[log] Message 0.000000
[log] Message , bitrate:
[log] Message N/A
[log] Message
[log] Message Stream #0:0
[log] Message : Video: mjpeg, yuvj422p(pc, bt470bg/unknown/unknown), 640x480
[log] Message ,
[log] Message 25 fps,
[log] Message 25 tbr,
[log] Message 25 tbn
[log] Message
[log] Message rtmp://stream.path.com: I/O error
[log] FFmpeg process failed with rc 1 in 1 milliseconds
I am trying to create a Perl script with Net::FTPSSL that move the files from the FTP server to actual server.
The script will run every X minutes / seconds to check if the customers uploaded something new on the FTP server and move it.
#!/usr/bin/perl -w
use strict;
use warnings;
use DateTime;
use Net::FTPSSL;
my $ftp;
sub connect_ftp {
$ftp = Net::FTPSSL->new('sftp.domain.com',
Encryption => EXP_CRYPT,
Debug => 1, DebugLogFile => "/usr/logs/ftpssl.log");
$ftp->login('username', 'password');
$ftp->binary();
}
sub copy_files {
my #folder_list;
my $folder;
#folder_list = $ftp->nlst();
foreach $folder (#folder_list) {
if ($folder ne "globa_username") {
$ftp->cwd($folder);
my #file_list;
my $video;
#file_list = $ftp->nlst();
foreach $video (#file_list) {
my $file_status;
my $result;
if ($video =~ /\.mp4$/i) {
if (!file_exist($video, $folder)) {
$file_status = $ftp->is_file($video);
if ($file_status > 0) {
$result = $ftp->get($video, "/usr/media/$folder/$video");
if (defined $result) {
#$ftp->delete($video);
}
}
}
}
}
}
$ftp->cdup();
}
#$ftp->quit();
}
sub file_exist {
my ($video, $folder) = #_;
return -f "/usr/media/$folder/$video";
}
connect_ftp();
for (;;) {
copy_files();
#sleep 60;
#sleep 30;
}
The script works fine until returns: **555 TLSv12: SSL connect attempt failed because of handshake problems**.
Net-FTPSSL Version: 0.42
IO-Socket-SSL Version: 1.94
Net-SSLeay Version: 1.55
IO-Socket-INET Version: 1.33
IO-Socket-INET6 might not be installed.
IO-Socket-IP Version: 0.21
IO Version: 1.25_06
Socket Version: 2.030
No IPv6 support available. You must 1st upgrade IO::Socket::SSL to support it!
Perl: 5.016003 [5.16.3], OS: linux
***** IPv6 not yet supported in Net::FTPSSL! *****
Server (port): sftp.domain.com (21)
Keys: (Debug), (Encryption), (DebugLogFile)
Values: (1), (E), (/usr/logs/ftpssl.log)
SKT <<< 220 (vsFTPd 3.0.2)
SKT >>> AUTH TLS
SKT <<< 234 Proceed with negotiation.
Object HASH Details ... (SSL:arguments - E)
SSL_hostname ==> sftp.domain.com
SSL_verify_mode ==> 0
SSL_version ==> TLSv12
Timeout ==> 120
Object Net::FTPSSL Details ... (sftp.domain.com:21 - E)
_FTPSSL_arguments ==> HASH(0x272cee8)
-- Croak ===> (undef)
-- Crypt ===> E
-- FixGetTs ===> 0
-- FixPutTs ===> 0
-- Host ===> sftp.domain.com
-- Pret ===> 0
-- Timeout ===> 120
-- buf_size ===> 10240
-- data_prot ===> P
-- dcsc_mode ===> 1
-- debug ===> 2
-- debug_extra ===> 0
-- debug_no_help ===> 0
-- ftpssl_filehandle ===> GLOB(0x2a6d8c8)
-- last_ftp_msg ===> 234 Proceed with negotiation.
-- myContext ===> HASH(0x2747d18)
-- SSL_ca_file ----> /etc/pki/tls/certs/ca-bundle.crt
-- SSL_reuse_ctx ----> IO::Socket::SSL::SSL_Context=HASH(0x2a8f1f0)
-- context ++++> 44543648
-- mySocketOpts ===> HASH(0x2746ec0)
-- PeerAddr ----> sftp.domain.com
-- PeerPort ----> 21
-- Proto ----> tcp
-- Timeout ----> 120
-- start_SSL_opts ===> HASH(0x272c840)
-- SSL_hostname ----> sftp.domain.com
-- SSL_verify_mode ----> 0
-- SSL_version ----> TLSv12
-- Timeout ----> 120
-- trace ===> 0
-- type ===> A
_SSL_arguments ==> HASH(0x2a8e770)
-- PeerAddr ===> 33.44.55.66
-- PeerPort ===> 21
-- Proto ===> tcp
-- SSL_ca_file ===> /etc/pki/tls/certs/ca-bundle.crt
-- SSL_cert_file ===> certs/client-cert.pem
-- SSL_check_crl ===> 0
-- SSL_honor_cipher_order ===> 0
-- SSL_hostname ===> sftp.domain.com
-- SSL_key_file ===> certs/client-key.pem
-- SSL_server ===> 0
-- SSL_use_cert ===> 0
-- SSL_verify_mode ===> 0
-- SSL_version ===> TLSv12
_SSL_ctx ==> IO::Socket::SSL::SSL_Context=HASH(0x2a8f1f0)
-- context ===> 44543648
_SSL_fileno ==> 4
_SSL_ioclass_upgraded ==> IO::Socket::INET
_SSL_last_err ==> SSL wants a read first
_SSL_object ==> 44657040
_SSL_opened ==> 1
io_socket_domain ==> 2
io_socket_proto ==> 6
io_socket_timeout ==> 120
io_socket_type ==> 1
************************************************************
>>> USER +++++++
<<< 331 Please specify the password.
>>> PASS *******
<<< 230 Login successful.
>>> HELP
<<< 214-The following commands are recognized.
<<< ABOR ACCT ALLO APPE CDUP CWD DELE EPRT EPSV FEAT HELP LIST MDTM MKD
<<< MODE NLST NOOP OPTS PASS PASV PORT PWD QUIT REIN REST RETR RMD RNFR
<<< RNTO SITE SIZE SMNT STAT STOR STOU STRU SYST TYPE USER XCUP XCWD XMKD
<<< XPWD XRMD
<<< 214 Help OK.
>>> FEAT
<<< 211-Features:
<<< AUTH SSL
<<< AUTH TLS
<<< EPRT
<<< EPSV
<<< MDTM
<<< PASV
<<< PBSZ
<<< PROT
<<< REST STREAM
<<< SIZE
<<< TVFS
<<< UTF8
<<< 211 End
<<+ 111 Auto-adding OPTS Command!
>>> HELP SITE
<<< 214-The following commands are recognized.
<<< ABOR ACCT ALLO APPE CDUP CWD DELE EPRT EPSV FEAT HELP LIST MDTM MKD
<<< MODE NLST NOOP OPTS PASS PASV PORT PWD QUIT REIN REST RETR RMD RNFR
<<< RNTO SITE SIZE SMNT STAT STOR STOU STRU SYST TYPE USER XCUP XCWD XMKD
<<< XPWD XRMD
<<< 214 Help OK.
>>> SITE HELP
<<< 214 CHMOD UMASK HELP
<<+ 214 The HELP command is supported.
>>> TYPE I
<<< 200 Switching to Binary mode.
<<< 200 Switching to Binary mode.
>>> PBSZ 0
<<< 200 PBSZ set to 0.
>>> PROT P
<<< 200 PROT now Private.
>>> PASV
<<< 227 Entering Passive Mode (33,44,55,66,20,207).
--- Host (33.44.55.66) Port (5327)
>>> NLST
<<< 150 Here comes the directory listing.
<<< 226 Directory send OK.
>>> CWD demo3
<<< 250 Directory successfully changed.
>>> PBSZ 0
<<< 200 PBSZ set to 0.
>>> PROT P
<<< 200 PROT now Private.
>>> PASV
<<< 227 Entering Passive Mode (33,44,55,66,20,144).
--- Host (33.44.55.66) Port (5264)
>>> NLST
<<< 150 Here comes the directory listing.
<<< 226 Directory send OK.
>>> CDUP
<<< 250 Directory successfully changed.
>>> CDUP
<<< 250 Directory successfully changed.
>>> CWD demo2
<<< 250 Directory successfully changed.
>>> PBSZ 0
<<< 200 PBSZ set to 0.
>>> PROT P
<<< 200 PROT now Private.
>>> PASV
<<< 227 Entering Passive Mode (33,44,55,66,20,179).
--- Host (33.44.55.66) Port (5299)
>>> NLST
<<< 150 Here comes the directory listing.
<<< 226 Directory send OK.
>>> CDUP
<<< 250 Directory successfully changed.
>>> CWD demo
<<< 250 Directory successfully changed.
>>> PBSZ 0
<<< 200 PBSZ set to 0.
>>> PROT P
<<< 200 PROT now Private.
>>> PASV
...
<<< 227 Entering Passive Mode (33,44,55,66,19,196).
--- Host (33.44.55.66) Port (5060)
>>> NLST
<<< 150 Here comes the directory listing.
<<+ 555 TLSv12: SSL connect attempt failed because of handshake problems
>>> PBSZ 0
<<+ 555 Unexpected EOF on Command Channel [0] (0, 1) ()
>>> PROT P
<<+ 555 Can't write command on socket:
UPDATE:
Tried downgrading SSL_version to SSLv3 but it still doesn't work.
$ftp = Net::FTPSSL->new('sftp.domain.com',
Encryption => EXP_CRYPT,
Debug => 1, DebugLogFile => "/usr/logs/ftpssl.log", SSL_version => "SSLv3");
Net::FTP
I created another script using Net::FTP it's works fine until:
Net::FTP>>> Net::FTP(3.11)
Net::FTP>>> Exporter(5.68)
Net::FTP>>> Net::Cmd(3.11)
Net::FTP>>> IO::Socket::SSL(2.072)
Net::FTP>>> IO::Socket::INET(1.33)
Net::FTP>>> IO::Socket(1.34)
Net::FTP>>> IO::Handle(1.33)
Net::FTP=GLOB(0x11d7400)<<< 220 (vsFTPd 3.0.2)
Net::FTP=GLOB(0x11d7400)>>> AUTH TLS
Net::FTP=GLOB(0x11d7400)<<< 234 Proceed with negotiation.
Net::FTP=GLOB(0x11d7400)>>> PBSZ 0
Net::FTP=GLOB(0x11d7400)<<< 200 PBSZ set to 0.
Net::FTP=GLOB(0x11d7400)>>> PROT P
Net::FTP=GLOB(0x11d7400)<<< 200 PROT now Private.
Net::FTP=GLOB(0x11d7400)>>> USER username
Net::FTP=GLOB(0x11d7400)<<< 331 Please specify the password.
Net::FTP=GLOB(0x11d7400)>>> PASS ....
Net::FTP=GLOB(0x11d7400)<<< 230 Login successful.
Net::FTP=GLOB(0x11d7400)>>> TYPE I
Net::FTP=GLOB(0x11d7400)<<< 200 Switching to Binary mode.
Net::FTP=GLOB(0x11d7400)>>> PASV
Net::FTP=GLOB(0x11d7400)<<< 227 Entering Passive Mode (33,44,55,66,21,107).
Net::FTP=GLOB(0x11d7400)>>> NLST
Net::FTP=GLOB(0x11d7400)<<< 150 Here comes the directory listing.
Net::FTP=GLOB(0x11d7400)<<< 226 Directory send OK.
Net::FTP=GLOB(0x11d7400)>>> CWD demo
Net::FTP=GLOB(0x11d7400)<<< 250 Directory successfully changed.
Net::FTP=GLOB(0x11d7400)>>> PASV
...
Net::FTP=GLOB(0x13e2400)<<< 150 Here comes the directory listing.
Net::FTP=GLOB(0x13e2400)<<< 226 Directory send OK.
Net::FTP=GLOB(0x13e2400)>>> CWD demo3
Net::FTP=GLOB(0x13e2400)<<< 250 Directory successfully changed.
Net::FTP=GLOB(0x13e2400)>>> PASV
Net::FTP=GLOB(0x13e2400)<<< 227 Entering Passive Mode (33,44,55,66,19,196).
Net::FTP=GLOB(0x13e2400)>>> NLST
failed to ssl upgrade dataconn: SSL wants a read first at ./upload_ftp.pl line 40.
Net::FTP=GLOB(0x13e2400)<<< 150 Here comes the directory listing.
Net::FTP=GLOB(0x13e2400)>>> CDUP
Net::FTP: Net::Cmd::getline(): unexpected EOF on command channel: at ./upload_ftp.pl line 56.
Net::FTP: Net::Cmd::_is_closed(): unexpected EOF on command channel: at ./upload_ftp.pl line 56.
I am trying to deploy a CEPH cluster with 4 nodes.
admin, node1, node2, client
I am using Oracle VM VIrtual Box to deploy centos 8 nodes.
I am using CEPH Octopus.
I am using ansible-playbook to deploy the cluster
I followed the steps listed in this blog to deploy my cluster:
https://computingforgeeks.com/install-and-configure-ceph-storage-cluster-on-centos-linux/?amp#ex1
[mons]
admin monitor_address=192.168.1.75
[mdss]
admin
[osds]
node1
node2
[clients]
node3
[mgrs]
admin
[grafana-server]
node2
but every time the process gets halted and I am receiving the following error:
TASK [ceph-osd : use ceph-volume lvm batch to create bluestore osds] ***********
Wednesday 21 July 2021 11:29:51 +0530 (0:00:00.085) 0:02:06.609 ***********
fatal: [node2]: FAILED! => changed=true
cmd:
- ceph-volume
- --cluster
- ceph
- lvm
- batch
- --bluestore
- --yes
- --osds-per-device
- '4'
- /dev/sdb
delta: '0:50:01.301186'
end: '2021-06-07 16:19:53.554904'
msg: non-zero return code
rc: 1
start: '2021-06-07 15:29:52.253718'
stderr: |-
--> DEPRECATION NOTICE
--> You are using the legacy automatic disk sorting behavior
--> The Pacific release will change the default to --no-auto
--> passed data devices: 1 physical, 0 LVM
--> relative data size: 0.25
Running command: /bin/ceph-authtool --gen-print-key
Running command: /bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring -i - osd new 4f1d0cc7-0363-4d06-84e8-c45be914159b
stderr: 2021-06-07T15:34:53.415+0530 7f018bcde700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T15:39:53.418+0530 7f018bcde700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T15:44:53.420+0530 7f018bcde700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T15:49:53.422+0530 7f018bcde700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T15:54:53.423+0530 7f018bcde700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T15:59:53.425+0530 7f018bcde700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T16:04:53.427+0530 7f018bcde700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T16:09:53.428+0530 7f018bcde700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T16:14:53.430+0530 7f018bcde700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T16:19:53.432+0530 7f018bcde700 0 monclient(hunting): authenticate timed out after 300
stderr: [errno 110] RADOS timed out (error connecting to the cluster)
Traceback (most recent call last):
File "/sbin/ceph-volume", line 11, in <module>
load_entry_point('ceph-volume==1.0.0', 'console_scripts', 'ceph-volume')()
File "/usr/lib/python3.6/site-packages/ceph_volume/main.py", line 40, in __init__
self.main(self.argv)
File "/usr/lib/python3.6/site-packages/ceph_volume/decorators.py", line 59, in newfunc
return f(*a, **kw)
File "/usr/lib/python3.6/site-packages/ceph_volume/main.py", line 152, in main
terminal.dispatch(self.mapper, subcommand_args)
File "/usr/lib/python3.6/site-packages/ceph_volume/terminal.py", line 194, in dispatch
instance.main()
File "/usr/lib/python3.6/site-packages/ceph_volume/devices/lvm/main.py", line 42, in main
terminal.dispatch(self.mapper, self.argv)
File "/usr/lib/python3.6/site-packages/ceph_volume/terminal.py", line 194, in dispatch
instance.main()
File "/usr/lib/python3.6/site-packages/ceph_volume/decorators.py", line 16, in is_root
return func(*a, **kw)
File "/usr/lib/python3.6/site-packages/ceph_volume/devices/lvm/batch.py", line 415, in main
self._execute(plan)
File "/usr/lib/python3.6/site-packages/ceph_volume/devices/lvm/batch.py", line 434, in _execute
c.create(argparse.Namespace(**args))
File "/usr/lib/python3.6/site-packages/ceph_volume/decorators.py", line 16, in is_root
return func(*a, **kw)
File "/usr/lib/python3.6/site-packages/ceph_volume/devices/lvm/create.py", line 26, in create
prepare_step.safe_prepare(args)
File "/usr/lib/python3.6/site-packages/ceph_volume/devices/lvm/prepare.py", line 252, in safe_prepare
self.prepare()
File "/usr/lib/python3.6/site-packages/ceph_volume/decorators.py", line 16, in is_root
return func(*a, **kw)
File "/usr/lib/python3.6/site-packages/ceph_volume/devices/lvm/prepare.py", line 292, in prepare
self.osd_id = prepare_utils.create_id(osd_fsid, json.dumps(secrets), osd_id=self.args.osd_id)
File "/usr/lib/python3.6/site-packages/ceph_volume/util/prepare.py", line 173, in create_id
raise RuntimeError('Unable to create a new OSD id')
RuntimeError: Unable to create a new OSD id
stderr_lines: <omitted>
stdout: ''
stdout_lines: <omitted>
fatal: [node1]: FAILED! => changed=true
cmd:
- ceph-volume
- --cluster
- ceph
- lvm
- batch
- --bluestore
- --yes
- --osds-per-device
- '4'
- /dev/sdb
delta: '0:50:02.352739'
end: '2021-06-07 16:19:54.591371'
msg: non-zero return code
rc: 1
start: '2021-06-07 15:29:52.238632'
stderr: |-
--> DEPRECATION NOTICE
--> You are using the legacy automatic disk sorting behavior
--> The Pacific release will change the default to --no-auto
--> passed data devices: 1 physical, 0 LVM
--> relative data size: 0.25
Running command: /bin/ceph-authtool --gen-print-key
Running command: /bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring -i - osd new 8b324b40-b7d4-4e97-9178-e0f987fd3b67
stderr: 2021-06-07T15:34:53.504+0530 7fbccc9f2700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T15:39:53.531+0530 7fbccc9f2700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T15:44:53.560+0530 7fbccc9f2700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T15:49:53.775+0530 7fbccc9f2700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T15:54:53.799+0530 7fbccc9f2700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T15:59:53.820+0530 7fbccc9f2700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T16:04:53.846+0530 7fbccc9f2700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T16:09:53.849+0530 7fbccc9f2700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T16:14:54.327+0530 7fbccc9f2700 0 monclient(hunting): authenticate timed out after 300
stderr: 2021-06-07T16:19:54.476+0530 7fbccc9f2700 0 monclient(hunting): authenticate timed out after 300
stderr: [errno 110] RADOS timed out (error connecting to the cluster)
Traceback (most recent call last):
File "/sbin/ceph-volume", line 11, in <module>
load_entry_point('ceph-volume==1.0.0', 'console_scripts', 'ceph-volume')()
File "/usr/lib/python3.6/site-packages/ceph_volume/main.py", line 40, in __init__
self.main(self.argv)
File "/usr/lib/python3.6/site-packages/ceph_volume/decorators.py", line 59, in newfunc
return f(*a, **kw)
File "/usr/lib/python3.6/site-packages/ceph_volume/main.py", line 152, in main
terminal.dispatch(self.mapper, subcommand_args)
File "/usr/lib/python3.6/site-packages/ceph_volume/terminal.py", line 194, in dispatch
instance.main()
File "/usr/lib/python3.6/site-packages/ceph_volume/devices/lvm/main.py", line 42, in main
terminal.dispatch(self.mapper, self.argv)
File "/usr/lib/python3.6/site-packages/ceph_volume/terminal.py", line 194, in dispatch
instance.main()
File "/usr/lib/python3.6/site-packages/ceph_volume/decorators.py", line 16, in is_root
return func(*a, **kw)
File "/usr/lib/python3.6/site-packages/ceph_volume/devices/lvm/batch.py", line 415, in main
self._execute(plan)
File "/usr/lib/python3.6/site-packages/ceph_volume/devices/lvm/batch.py", line 434, in _execute
c.create(argparse.Namespace(**args))
File "/usr/lib/python3.6/site-packages/ceph_volume/decorators.py", line 16, in is_root
return func(*a, **kw)
File "/usr/lib/python3.6/site-packages/ceph_volume/devices/lvm/create.py", line 26, in create
prepare_step.safe_prepare(args)
File "/usr/lib/python3.6/site-packages/ceph_volume/devices/lvm/prepare.py", line 252, in safe_prepare
self.prepare()
File "/usr/lib/python3.6/site-packages/ceph_volume/decorators.py", line 16, in is_root
return func(*a, **kw)
File "/usr/lib/python3.6/site-packages/ceph_volume/devices/lvm/prepare.py", line 292, in prepare
self.osd_id = prepare_utils.create_id(osd_fsid, json.dumps(secrets), osd_id=self.args.osd_id)
File "/usr/lib/python3.6/site-packages/ceph_volume/util/prepare.py", line 173, in create_id
raise RuntimeError('Unable to create a new OSD id')
RuntimeError: Unable to create a new OSD id
stderr_lines: <omitted>
stdout: ''
stdout_lines: <omitted>
Please help me with this. I was successful only 2 times out of the 10 times I tried.
I used the same configuration every time.
Change OSD nodes to 3 nodes and try again because of quorum, or you can activate test mode from this config file:
group_vars/all.yml ---> change ceph_test: false to ceph_test: true
I tried to install MQSeries 1.34 from CPAN, and I was getting an error, which I found a fix for on the CPAN bug tracking website. So I applied the fix and still got a few test errors, but the build seemed okay. Installing it with a force install MQSeries worked. Once I had installed it, I can construct objects and reference the libraries in my other perl scripts, but when I try to connect to the queue manager or queue, I get an error back.
Any advice on what is wrong with the setup or how to fix this and get my connection back up and running would be much appreciated.
Here are specifics about my configuration:
$ uname -srvpio
Linux 2.6.32-573.22.1.el6.x86_64 #1 SMP Thu Mar 17 03:23:39 EDT 2016 x86_64 x86_64 GNU/Linux
$ /opt/mqm/bin/dspmqsver
Name: WebSphere MQ Advanced Message Security
Version: 7.5.0.0
Level: p000-L120604
BuildType: IKAP - (Production)
$ rpm -qa |grep 'MQ' |sort
MQSeriesAMS-7.5.0-0.x86_64
MQSeriesClient-7.5.0-0.x86_64
MQSeriesExplorer-7.5.0-0.x86_64
MQSeriesFTAgent-7.5.0-0.x86_64
MQSeriesFTBase-7.5.0-0.x86_64
MQSeriesFTLogger-7.5.0-0.x86_64
MQSeriesFTService-7.5.0-0.x86_64
MQSeriesFTTools-7.5.0-0.x86_64
MQSeriesGSKit-7.5.0-0.x86_64
MQSeriesJava-7.5.0-0.x86_64
MQSeriesJRE-7.5.0-0.x86_64
MQSeriesMan-7.5.0-0.x86_64
MQSeriesMsg_cs-7.5.0-0.x86_64
MQSeriesMsg_de-7.5.0-0.x86_64
MQSeriesMsg_es-7.5.0-0.x86_64
MQSeriesMsg_fr-7.5.0-0.x86_64
MQSeriesMsg_hu-7.5.0-0.x86_64
MQSeriesMsg_it-7.5.0-0.x86_64
MQSeriesMsg_ja-7.5.0-0.x86_64
MQSeriesMsg_ko-7.5.0-0.x86_64
MQSeriesMsg_pl-7.5.0-0.x86_64
MQSeriesMsg_pt-7.5.0-0.x86_64
MQSeriesMsg_ru-7.5.0-0.x86_64
MQSeriesMsg_Zh_CN-7.5.0-0.x86_64
MQSeriesMsg_Zh_TW-7.5.0-0.x86_64
MQSeriesRuntime-7.5.0-0.x86_64
MQSeriesSamples-7.5.0-0.x86_64
MQSeriesSDK-7.5.0-0.x86_64
MQSeriesServer-7.5.0-0.x86_64
MQSeriesXRClients-7.5.0-0.x86_64
MQSeriesXRService-7.5.0-0.x86_64
$ ./dispModVersion.pl MQSeries
Module Installed CPAN
MQSeries 1.34 1.34
$ perl -v
This is perl 5, version 22, subversion 1 (v5.22.1) built for x86_64-linux
Copyright 1987-2015, Larry Wall
Perl may be copied only under the terms of either the Artistic License or the GNU General Public License, which may be found in the Perl 5 source kit.
Complete documentation for Perl, including FAQ lists, should be found on this system using "man perl" or "perldoc perl". If you have access to the Internet, point your browser at http://www.perl.org/, the Perl Home Page.
$ perl -V
Summary of my perl5 (revision 5 version 22 subversion 1) configuration:
Platform:
osname=linux, osvers=2.6.32-573.22.1.el6.x86_64, archname=x86_64-linux
uname='linux ******* 2.6.32-573.22.1.el6.x86_64 #1 smp thu mar 17 03:23:39 edt 2016 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=******'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2',
optimize='-O2',
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.7 20120313 (Red Hat 4.4.7-16)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678, doublekind=3
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16, longdblkind=3
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib /lib/../lib64 /usr/lib/../lib64 /lib /lib64 /usr/lib64 /usr/local/lib64
libs=-lpthread -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.12.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.12'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LOCALE_TIME USE_PERLIO
USE_PERL_ATOF
Built under linux
Compiled at Apr 18 2016 15:46:59
%ENV:
PERL5BIN="*******/bin"
PERL5HOME="*******"
PERL5SITE="*******/lib/site_perl/5.22.1"
#INC:
*******/lib/site_perl/5.22.1/x86_64-linux
*******/lib/site_perl/5.22.1
*******/lib/5.22.1/x86_64-linux
*******/lib/5.22.1
When I first tried to install MQSeries, I got the following error:
t/99-pod.t .. 2/63
# Failed test 'POD test for MQSeries/Message/IIH.pm'
# at Test/Pod.pm line 187.
# MQSeries/Message/IIH.pm (415): Non-ASCII character seen before =encoding in 'Villag▒mez'. Assuming CP1252
# Looks like you failed 1 test of 63.
t/99-pod.t .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/63 subtests
Test Summary Report
-------------------
t/99-pod.t (Wstat: 256 Tests: 63 Failed: 1)
Failed test: 61
Non-zero exit status: 1
Files=1, Tests=63, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.34 cusr 0.00 csys = 0.37 CPU)
Result: FAIL
Failed 1/1 test programs. 1/63 subtests failed.
Then, I modified the file MQSeries/Message/IIH.pm to add =encoding ISO-8859-1 at the start of the file, per bug report on CPAN, I ran the install again and got the following:
t/99-pod.t .. ok
All tests successful.
Files=1, Tests=63, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.34 cusr 0.01 csys = 0.39 CPU)
Result: PASS
make[1]: Entering directory `build/MQSeries-1.34-SLJq6K/MQClient'
PERL_DL_NONLAZY=1 "perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
t/10constants.t ........... ok
t/20convert.t ............. Failed 5/6 subtests
t/30basic.t ............... ok
t/31properties.t .......... ok
t/32async_put.t ........... ok
t/40oo-qmgr.t ............. 3/14 MQCONN failed (Reason = 2059) (Queue manager not available for connection.) at t/40oo-qmgr.t line 38.
# Failed test 'MQSeries::QueueManager - constructor'
# at t/40oo-qmgr.t line 39.
t/40oo-qmgr.t ............. 5/14 MQCONN failed (Reason = 2059) (Queue manager not available for connection.) at t/40oo-qmgr.t line 52.
# Failed test 'MQSeries::QueueManager - Connect'
# at t/40oo-qmgr.t line 58.
t/40oo-qmgr.t ............. 7/14 MQCONN failed (Reason = 2059) (Queue manager not available for connection.) at t/40oo-qmgr.t line 73.
# Failed test 'MQSeries::QueueManager - constructor'
# at t/40oo-qmgr.t line 74.
Can't call method "Open" on an undefined value at t/40oo-qmgr.t line 77.
# Looks like you planned 14 tests but ran 7.
# Looks like you failed 3 tests of 7 run.
# Looks like your test exited with 13 just after 7.
t/40oo-qmgr.t ............. Dubious, test returned 13 (wstat 3328, 0xd00)
Failed 10/14 subtests
t/50oo-command.t .......... ok
t/51oo-command-changes.t .. ok
t/52oo-command-filter.t ... ok
t/60-logs.t ............... ok
t/70-config.t ............. ok
Test Summary Report
-------------------
t/20convert.t (Wstat: 0 Tests: 2 Failed: 1)
Failed test: 2
Parse errors: Bad plan. You planned 6 tests but ran 2.
t/40oo-qmgr.t (Wstat: 3328 Tests: 7 Failed: 3)
Failed tests: 3, 5, 7
Non-zero exit status: 13
Parse errors: Bad plan. You planned 14 tests but ran 7.
Files=11, Tests=5334, 1264 wallclock secs ( 0.96 usr 0.02 sys + 1.56 cusr 0.18 csys = 2.72 CPU)
Result: FAIL
Failed 2/11 test programs. 4/5334 subtests failed.
If I force the install, I can get it to finish the install after everything is said and done, but then I get the following error when trying to connect:
MQCONN failed (Reason = 2059) (Queue manager not available for connection.) at testMQConnectivity.pl line 16.
MQCONN failed (Reason = 2059) (Queue manager not available for connection.) at testMQConnectivity.pl line 16.
at MQSeries/QueueManager.pm line 809.
MQSeries::QueueManager::Connect(MQSeries::QueueManager=HASH(0x24a7180)) called at MQSeries/QueueManager.pm line 155
MQSeries::QueueManager::new(undef, "QueueManager", "*******", "Reason", SCALAR(0x151d4f0), "CompCode", SCALAR(0x151d610), "ClientConn", ...) called at testMQConnectivity.pl line 16
I edited the CONFIG file after pulling the data from CPAN to reference my remote MQ Queues that I can connect to using /opt/mqm/samp/bin/amqsputc or /opt/mqm/samp/bin/amqsgetc, after setting export MQSERVER=..., if I run make test TEST_VERBOSE=1 from the working CPAN directory, I see the following output:
t/20convert.t:
t/20convert.t .............
1..6
ok 1
ok 2
ok 3
ok 4
MQGET failed: CompCode => 2, Reason => 2033
not ok 5
Message conversion failed.
Should be: 'This msg is in EBCDIC'
Is: ''
not ok 6
Failed 2/6 subtests
t/31properties.t:
t/31properties.t ..........
1..22
ok 1 - use MQClient::MQSeries;
Connecting to queue manager '*******' (MQCONN)
ok 2 - MQCONN
Opening queue manager for inquire
ok 3 - MQOPEN - queue manager
Querying queue manager attributes (MQINQ)
ok 4 - MQINQ
Closing queue manager object handle (MQCLOSE)
ok 5 - MQCLOSE - queue manager
Create message handle object (MQCRTMH)
ok 6 - MQCRTMH
Set message property (MQSETMP - string)
ok 7 - MQSETMP - string
Set message property (MQSETMP - float)
ok 8 - MQSETMP - float
Set message property (MQSETMP - int)
ok 9 - MQSETMP - int
Inquire message property (MQINQMP - float)
ok 10 - MQINQMP - float
ok 11 - MQINQMP - float value okay (3.14164996147156)
Delete float property
ok 12 - MQDLTMP - float
Opening queue '*******' (MQOPEN)
ok 13 - MQOPEN - queue
Putting message with properties (MQPUT)
ok 14 - MQPUT
Create message handle object (MQCRTMH #2)
ok 15 - MQCRTMH \#2
Getting message (MQGET)
not ok 16 - MQGET
# Failed test 'MQGET'
# at t/31properties.t line 146.
Inquire message property (MQINQMP - int)
not ok 17 - MQINQMP - int
# Failed test 'MQINQMP - int'
# at t/31properties.t line 156.
Use of uninitialized value $prop in concatenation (.) or string at t/31properties.t line 157.
not ok 18 - MQINQMP - int value okay ()
# Failed test 'MQINQMP - int value okay ()'
# at t/31properties.t line 157.
# got: undef
# expected: '42'
Delete message handle (MQDLTMH)
ok 19 - MQDLTMH
Delete message handle (MQDLTMH #2)
ok 20 - MQDLTMH \#2
Closing queue (MQCLOSE)
ok 21 - MQCLOSE
Disconnecting (MQDISC)
ok 22 - MQDISC
# Looks like you failed 3 tests of 22.
Dubious, test returned 3 (wstat 768, 0x300)
Failed 3/22 subtests
t/32async_put.t:
t/32async_put.t ...........
1..25
ok 1 - use MQClient::MQSeries;
Connecting to queue manager '*******' (MQCONN)
ok 2 - MQCONN
Opening queue manager for inquire
ok 3 - MQOPEN - queue manager
Querying queue manager attributes (MQINQ)
MQINQ returned: CompCode => 0, Reason => 0
ok 4 - MQINQ
Closing queue manager object handle (MQCLOSE)
ok 5 - MQCLOSE - queue manager
Opening queue '*******' (MQOPEN)
ok 6 - MQOPEN - queue
Putting message #1 (async MQPUT)
ok 7 - MQPUT - 1
Putting message #2 (async MQPUT)
ok 8 - MQPUT - 2
Putting message #3 (async MQPUT)
ok 9 - MQPUT - 3
Putting message #4 (async MQPUT)
ok 10 - MQPUT - 4
Putting message #5 (async MQPUT)
ok 11 - MQPUT - 5
Getting status info (MQSTAT)
ok 12 - MQSTAT
not ok 13 - MQSTAT result
# Failed test 'MQSTAT result'
# at t/32async_put.t line 120.
# Structures begin differing at:
# $got->{PutSuccessCount} = '5'
# $expected->{PutSuccessCount} = '0'
Getting message #1 (MQGET)
ok 14 - MQGET - 1
ok 15 - MQGET message content - 1
Getting message #2 (MQGET)
ok 16 - MQGET - 2
ok 17 - MQGET message content - 2
Getting message #3 (MQGET)
ok 18 - MQGET - 3
ok 19 - MQGET message content - 3
Getting message #4 (MQGET)
ok 20 - MQGET - 4
ok 21 - MQGET message content - 4
Getting message #5 (MQGET)
ok 22 - MQGET - 5
ok 23 - MQGET message content - 5
Closing queue (MQCLOSE)
ok 24 - MQCLOSE
Disconnecting (MQDISC)
ok 25 - MQDISC
# Looks like you failed 1 test of 25.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/25 subtests
And t/40oo-qmgr.t, which was previously failing now executes successfully:
t/40oo-qmgr.t:
t/40oo-qmgr.t .............
1..14
ok 1 - use MQClient::MQSeries;
ok 2 - use MQSeries::QueueManager;
ok 3 - MQSeries::QueueManager - constructor
ok 4 - MQSeries::QueueManager - constructor - AutoConnect=0
ok 5 - MQSeries::QueueManager - Connect
ok 6 - MQSeries::QueueManager - Disconnect
ok 7 - MQSeries::QueueManager - constructor
ok 8 - MQSeries::QueueManager - Open
ok 9 - MQSeries::QueueManager - Inquire
ok 10 - MQSeries::QueueManager - Inquire - Platform
ok 11 - MQSeries::QueueManager - Inquire - CodedCharSetId
ok 12 - MQSeries::QueueManager - Inquire - CommandLevel
ok 13 - MQSeries::QueueManager - Inquire - DeadLetterQName
ok 14 - MQSeries::QueueManager - Close
ok
Yielding the final results:
Test Summary Report
-------------------
t/20convert.t (Wstat: 0 Tests: 6 Failed: 2)
Failed tests: 5-6
t/31properties.t (Wstat: 768 Tests: 22 Failed: 3)
Failed tests: 16-18
Non-zero exit status: 3
t/32async_put.t (Wstat: 256 Tests: 25 Failed: 1)
Failed test: 13
Non-zero exit status: 1
Files=11, Tests=5345, 183 wallclock secs ( 1.02 usr 0.08 sys + 1.48 cusr 0.18 csys = 2.76 CPU)
Result: FAIL
Failed 3/11 test programs. 6/5345 subtests failed.
Any ideas on how to get this resolved and get the package up and running?
If I run /opt/mqm/samp/bin/amqsputc or /opt/mqm/samp/bin/amqsgetc, I can connect to the same host, port, channel, queue manager, and queue from this host.
Thanks!
I am currently running perl 5.8.8 on a server and I'm trying to install 5.14.
I configured it to usethreads and use64bitint and otherwise the defaults it suggested.
make ran without problems, but make test is failing, on
../cpan/IPC-SysV/t/ipcsysv.t
../cpan/IPC-SysV/t/shm.t
thus:
# ./perl harness ../cpan/IPC-SysV/t/shm.t ../cpan/IPC-SysV/t/ipcsysv.t
../cpan/IPC-SysV/t/shm.t ...... IPC::SharedMem->new failed: Invalid argument at t/shm.t line 54.
../cpan/IPC-SysV/t/shm.t ...... Dubious, test returned 22 (wstat 5632, 0x1600)
No subtests run
../cpan/IPC-SysV/t/ipcsysv.t .. 1/38 shmget failed: Invalid argument at t/ipcsysv.t line 100.
# Looks like you planned 38 tests but ran 17.
# Looks like your test exited with 22 just after 17.
../cpan/IPC-SysV/t/ipcsysv.t .. Dubious, test returned 22 (wstat 5632, 0x1600)
Failed 21/38 subtests
Test Summary Report
-------------------
../cpan/IPC-SysV/t/shm.t (Wstat: 5632 Tests: 0 Failed: 0)
Non-zero exit status: 22
Parse errors: No plan found in TAP output
../cpan/IPC-SysV/t/ipcsysv.t (Wstat: 5632 Tests: 17 Failed: 0)
Non-zero exit status: 22
Parse errors: Bad plan. You planned 38 tests but ran 17.
Files=2, Tests=17, 0 wallclock secs ( 0.01 usr 0.00 sys + 0.13 cusr 0.00 csys = 0.14 CPU)
Result: FAIL
Both of these tests are reporting 'Invalid argument', but when I look at the source, I can't see anything that looks invalid. I'm not really sure how to proceed... any pointers?
UPDATE
I ran
strace perl -MIPC::SysV=IPC_PRIVATE,S_IRWXU -e 'shmget(IPC_PRIVATE, 8, S_IRWXU) or die $!'
on two servers: one which is having these problems and one which is not.
There was a lot of output, but what appears interesting is this:
GOOD:
.
.
.
stat64("/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi/auto/IPC/SysV", 0x9d7f0c8) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/perl5/site_perl/5.8.8/auto/IPC/SysV", 0x9d7f0c8) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/perl5/site_perl/auto/IPC/SysV", 0x9d7f0c8) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/IPC/SysV", 0x9d7f0c8) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/perl5/vendor_perl/5.8.8/auto/IPC/SysV", 0x9d7f0c8) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/perl5/vendor_perl/auto/IPC/SysV", 0x9d7f0c8) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/perl5/5.8.8/i386-linux-thread-multi/auto/IPC/SysV", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
stat64("/usr/lib/perl5/5.8.8/i386-linux-thread-multi/auto/IPC/SysV/SysV.so", {st_mode=S_IFREG|0755, st_size=15072, ...}) = 0
stat64("/usr/lib/perl5/5.8.8/i386-linux-thread-multi/auto/IPC/SysV/SysV.bs", 0x9d7f0c8) = -1 ENOENT (No such file or directory)
futex(0x4d106c, FUTEX_WAKE_PRIVATE, 2147483647) = 0
open("/usr/lib/perl5/5.8.8/i386-linux-thread-multi/auto/IPC/SysV/SysV.so", O_RDONLY) = 4
read(4, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \v\0\0004\0\0\0"..., 512) = 512
fstat64(4, {st_mode=S_IFREG|0755, st_size=15072, ...}) = 0
mmap2(NULL, 17948, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x588000
mmap2(0x58c000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x3) = 0x58c000
close(4) = 0
close(3) = 0
shmget(IPC_PRIVATE, 8, 0700) = 7438344
exit_group(0)
BAD:
.
.
.
stat64("/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi/auto/IPC/SysV", 0x8d290c8) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/perl5/site_perl/5.8.8/auto/IPC/SysV", 0x8d290c8) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/perl5/site_perl/auto/IPC/SysV", 0x8d290c8) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/IPC/SysV", 0x8d290c8) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/perl5/vendor_perl/5.8.8/auto/IPC/SysV", 0x8d290c8) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/perl5/vendor_perl/auto/IPC/SysV", 0x8d290c8) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/perl5/5.8.8/i386-linux-thread-multi/auto/IPC/SysV", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
stat64("/usr/lib/perl5/5.8.8/i386-linux-thread-multi/auto/IPC/SysV/SysV.so", {st_mode=S_IFREG|0755, st_size=15072, ...}) = 0
stat64("/usr/lib/perl5/5.8.8/i386-linux-thread-multi/auto/IPC/SysV/SysV.bs", 0x8d290c8) = -1 ENOENT (No such file or directory)
futex(0x94306c, FUTEX_WAKE_PRIVATE, 2147483647) = 0
open("/usr/lib/perl5/5.8.8/i386-linux-thread-multi/auto/IPC/SysV/SysV.so", O_RDONLY) = 4
read(4, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \v\0\0004\0\0\0"..., 512) = 512
fstat64(4, {st_mode=S_IFREG|0755, st_size=15072, ...}) = 0
mmap2(NULL, 17948, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0x6a4000
mmap2(0x6a8000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x3) = 0x6a8000
close(4) = 0
close(3) = 0
shmget(IPC_PRIVATE, 8, 0700) = -1 EINVAL (Invalid argument)
open("/usr/share/locale/locale.alias", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=2528, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7dbe000
read(3, "# Locale name alias data base.\n#"..., 4096) = 2528
read(3, "", 4096) = 0
close(3) = 0
munmap(0xb7dbe000, 4096) = 0
open("/usr/share/locale/en_US.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en_US.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en_US/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
write(2, "Invalid argument at -e line 1.\n", 31Invalid argument at -e line 1.
) = 31
exit_group(22) = ?
So, it appears that the same thing is happening on both servers, it's just that on one, I see
shmget(IPC_PRIVATE, 8, 0700) = 7438344
and the other, I see
shmget(IPC_PRIVATE, 8, 0700) = -1 EINVAL (Invalid argument)
The versions of IPC::SysV are the same on both servers... but it looks to me that this isn't relevant, and that the problem is the the code making the system call... right?
What next?
** UPDATE 2 **
After some googling, I ran the following:
GOOD:
# cat /proc/sys/kernel/shmmax
4294967295
BAD:
# cat /proc/sys/kernel/shmmax
0
So, that explains the EINVAL, since (from the man pages)
EINVAL
A new segment was to be created and size < SHMMIN or size > SHMMAX, or no new segment
was to be created, a segment with given key existed, but size is greater than the size
of that segment.
Now, my question is, is there a good reason why this might be set at zero?
Problem solved.
The /etc/sysctl.conf file contained the following:
kernel.shmmax = 137438953472
This is a 64 bit value, but the system is a 32 bit system.
As a result, the SHMMAX value was being set to 0, making all calls to shmget fail.
Changing it to
kernel.shmmax = 4294967295
And using
echo 4294967295 >/proc/sys/kernel/shmmax
I changed the value of SHMMAX and the test completed successfully.