Related
How do I declare a variable for use in a PostgreSQL 8.3 query?
In MS SQL Server I can do this:
DECLARE #myvar INT
SET #myvar = 5
SELECT *
FROM somewhere
WHERE something = #myvar
How do I do the same in PostgreSQL? According to the documentation variables are declared simply as "name type;", but this gives me a syntax error:
myvar INTEGER;
Could someone give me an example of the correct syntax?
I accomplished the same goal by using a WITH clause, it's nowhere near as elegant but can do the same thing. Though for this example it's really overkill. I also don't particularly recommend this.
WITH myconstants (var1, var2) as (
values (5, 'foo')
)
SELECT *
FROM somewhere, myconstants
WHERE something = var1
OR something_else = var2;
There is no such feature in PostgreSQL. You can do it only in pl/PgSQL (or other pl/*), but not in plain SQL.
An exception is WITH () query which can work as a variable, or even tuple of variables. It allows you to return a table of temporary values.
WITH master_user AS (
SELECT
login,
registration_date
FROM users
WHERE ...
)
SELECT *
FROM users
WHERE master_login = (SELECT login
FROM master_user)
AND (SELECT registration_date
FROM master_user) > ...;
You could also try this in PLPGSQL:
DO $$
DECLARE myvar integer;
BEGIN
SELECT 5 INTO myvar;
DROP TABLE IF EXISTS tmp_table;
CREATE TABLE tmp_table AS
SELECT * FROM yourtable WHERE id = myvar;
END $$;
SELECT * FROM tmp_table;
The above requires Postgres 9.0 or later.
Dynamic Config Settings
you can "abuse" dynamic config settings for this:
-- choose some prefix that is unlikely to be used by postgres
set session my.vars.id = '1';
select *
from person
where id = current_setting('my.vars.id')::int;
Config settings are always varchar values, so you need to cast them to the correct data type when using them. This works with any SQL client whereas \set only works in psql
The above requires Postgres 9.2 or later.
For previous versions, the variable had to be declared in postgresql.conf prior to being used, so it limited its usability somewhat. Actually not the variable completely, but the config "class" which is essentially the prefix. But once the prefix was defined, any variable could be used without changing postgresql.conf
It depends on your client.
However, if you're using the psql client, then you can use the following:
my_db=> \set myvar 5
my_db=> SELECT :myvar + 1 AS my_var_plus_1;
my_var_plus_1
---------------
6
If you are using text variables you need to quote.
\set myvar 'sometextvalue'
select * from sometable where name = :'myvar';
This solution is based on the one proposed by fei0x but it has the advantages that there is no need to join the value list of constants in the query and constants can be easily listed at the start of the query. It also works in recursive queries.
Basically, every constant is a single-value table declared in a WITH clause which can then be called anywhere in the remaining part of the query.
Basic example with two constants:
WITH
constant_1_str AS (VALUES ('Hello World')),
constant_2_int AS (VALUES (100))
SELECT *
FROM some_table
WHERE table_column = (table constant_1_str)
LIMIT (table constant_2_int)
Alternatively you can use SELECT * FROM constant_name instead of TABLE constant_name which might not be valid for other query languages different to postgresql.
Using a Temp Table outside of pl/PgSQL
Outside of using pl/pgsql or other pl/* language as suggested, this is the only other possibility I could think of.
begin;
select 5::int as var into temp table myvar;
select *
from somewhere s, myvar v
where s.something = v.var;
commit;
I want to propose an improvement to #DarioBarrionuevo's answer, to make it simpler leveraging temporary tables.
DO $$
DECLARE myvar integer = 5;
BEGIN
CREATE TEMP TABLE tmp_table ON COMMIT DROP AS
-- put here your query with variables:
SELECT *
FROM yourtable
WHERE id = myvar;
END $$;
SELECT * FROM tmp_table;
True, there is no vivid and unambiguous way to declare a single-value variable, what you can do is
with myVar as (select "any value really")
then, to get access to the value stored in this construction, you do
(select * from myVar)
for example
with var as (select 123)
... where id = (select * from var)
You may resort to tool special features. Like for DBeaver own proprietary syntax:
#set name = 'me'
SELECT :name;
SELECT ${name};
DELETE FROM book b
WHERE b.author_id IN (SELECT a.id FROM author AS a WHERE a.name = :name);
As you will have gathered from the other answers, PostgreSQL doesn’t have this mechanism in straight SQL, though you can now use an anonymous block. However, you can do something similar with a Common Table Expression (CTE):
WITH vars AS (
SELECT 5 AS myvar
)
SELECT *
FROM somewhere,vars
WHERE something = vars.myvar;
You can, of course, have as many variables as you like, and they can also be derived. For example:
WITH vars AS (
SELECT
'1980-01-01'::date AS start,
'1999-12-31'::date AS end,
(SELECT avg(height) FROM customers) AS avg_height
)
SELECT *
FROM customers,vars
WHERE (dob BETWEEN vars.start AND vars.end) AND height<vars.avg_height;
The process is:
Generate a one-row cte using SELECT without a table (in Oracle you will need to include FROM DUAL).
CROSS JOIN the cte with the other table. Although there is a CROSS JOIN syntax, the older comma syntax is slightly more readable.
Note that I have cast the dates to avoid possible issues in the SELECT clause. I used PostgreSQL’s shorter syntax, but you could have used the more formal CAST('1980-01-01' AS date) for cross-dialect compatibility.
Normally, you want to avoid cross joins, but since you’re only cross joining a single row, this has the effect of simply widening the table with the variable data.
In many cases, you don’t need to include the vars. prefix if the names don’t clash with the names in the other table. I include it here to make the point clear.
Also, you can go on to add more CTEs.
This also works in all current versions of MSSQL and MySQL, which do support variables, as well as SQLite which doesn’t, and Oracle which sort of does and sort of doesn’t.
Here is an example using PREPARE statements. You still can't use ?, but you can use $n notation:
PREPARE foo(integer) AS
SELECT *
FROM somewhere
WHERE something = $1;
EXECUTE foo(5);
DEALLOCATE foo;
In DBeaver you can use parameters in queries just like you can from code, so this will work:
SELECT *
FROM somewhere
WHERE something = :myvar
When you run the query DBeaver will ask you for the value for :myvar and run the query.
Here is a code segment using plain variable in postges terminal. I have used it a few times. But need to figure a better way. Here I am working with string variable. Working with integer variable, you don't need the triple quote. Triple quote becomes single quote at query time; otherwise you got syntax error. There might be a way to eliminate the need of triple quote when working with string variables. Please update if you find a way to improve.
\set strainname '''B.1.1.7'''
select *
from covid19strain
where name = :strainname ;
In psql, you can use these 'variables' as macros. Note that they get "evaluated" every time they are used, rather than at the time that they are "set".
Simple example:
\set my_random '(SELECT random())'
select :my_random; -- gives 0.23330629315990592
select :my_random; -- gives 0.67458399344433542
this gives two different answers each time.
However, you can still use these as a valuable shorthand to avoid repeating lots of subselects.
\set the_id '(SELECT id FROM table_1 WHERE name = ''xxx'' LIMIT 1)'
and then use it in your queries later as
:the_id
e.g.
INSERT INTO table2 (table1_id,x,y,z) VALUES (:the_id, 1,2,3)
Note you have to double-quote the strings in the variables, because the whole thing is then string-interpolated (i.e. macro-expanded) into your query.
How do I declare a variable for use in a PostgreSQL 8.3 query?
In MS SQL Server I can do this:
DECLARE #myvar INT
SET #myvar = 5
SELECT *
FROM somewhere
WHERE something = #myvar
How do I do the same in PostgreSQL? According to the documentation variables are declared simply as "name type;", but this gives me a syntax error:
myvar INTEGER;
Could someone give me an example of the correct syntax?
I accomplished the same goal by using a WITH clause, it's nowhere near as elegant but can do the same thing. Though for this example it's really overkill. I also don't particularly recommend this.
WITH myconstants (var1, var2) as (
values (5, 'foo')
)
SELECT *
FROM somewhere, myconstants
WHERE something = var1
OR something_else = var2;
There is no such feature in PostgreSQL. You can do it only in pl/PgSQL (or other pl/*), but not in plain SQL.
An exception is WITH () query which can work as a variable, or even tuple of variables. It allows you to return a table of temporary values.
WITH master_user AS (
SELECT
login,
registration_date
FROM users
WHERE ...
)
SELECT *
FROM users
WHERE master_login = (SELECT login
FROM master_user)
AND (SELECT registration_date
FROM master_user) > ...;
You could also try this in PLPGSQL:
DO $$
DECLARE myvar integer;
BEGIN
SELECT 5 INTO myvar;
DROP TABLE IF EXISTS tmp_table;
CREATE TABLE tmp_table AS
SELECT * FROM yourtable WHERE id = myvar;
END $$;
SELECT * FROM tmp_table;
The above requires Postgres 9.0 or later.
Dynamic Config Settings
you can "abuse" dynamic config settings for this:
-- choose some prefix that is unlikely to be used by postgres
set session my.vars.id = '1';
select *
from person
where id = current_setting('my.vars.id')::int;
Config settings are always varchar values, so you need to cast them to the correct data type when using them. This works with any SQL client whereas \set only works in psql
The above requires Postgres 9.2 or later.
For previous versions, the variable had to be declared in postgresql.conf prior to being used, so it limited its usability somewhat. Actually not the variable completely, but the config "class" which is essentially the prefix. But once the prefix was defined, any variable could be used without changing postgresql.conf
It depends on your client.
However, if you're using the psql client, then you can use the following:
my_db=> \set myvar 5
my_db=> SELECT :myvar + 1 AS my_var_plus_1;
my_var_plus_1
---------------
6
If you are using text variables you need to quote.
\set myvar 'sometextvalue'
select * from sometable where name = :'myvar';
This solution is based on the one proposed by fei0x but it has the advantages that there is no need to join the value list of constants in the query and constants can be easily listed at the start of the query. It also works in recursive queries.
Basically, every constant is a single-value table declared in a WITH clause which can then be called anywhere in the remaining part of the query.
Basic example with two constants:
WITH
constant_1_str AS (VALUES ('Hello World')),
constant_2_int AS (VALUES (100))
SELECT *
FROM some_table
WHERE table_column = (table constant_1_str)
LIMIT (table constant_2_int)
Alternatively you can use SELECT * FROM constant_name instead of TABLE constant_name which might not be valid for other query languages different to postgresql.
Using a Temp Table outside of pl/PgSQL
Outside of using pl/pgsql or other pl/* language as suggested, this is the only other possibility I could think of.
begin;
select 5::int as var into temp table myvar;
select *
from somewhere s, myvar v
where s.something = v.var;
commit;
I want to propose an improvement to #DarioBarrionuevo's answer, to make it simpler leveraging temporary tables.
DO $$
DECLARE myvar integer = 5;
BEGIN
CREATE TEMP TABLE tmp_table ON COMMIT DROP AS
-- put here your query with variables:
SELECT *
FROM yourtable
WHERE id = myvar;
END $$;
SELECT * FROM tmp_table;
True, there is no vivid and unambiguous way to declare a single-value variable, what you can do is
with myVar as (select "any value really")
then, to get access to the value stored in this construction, you do
(select * from myVar)
for example
with var as (select 123)
... where id = (select * from var)
You may resort to tool special features. Like for DBeaver own proprietary syntax:
#set name = 'me'
SELECT :name;
SELECT ${name};
DELETE FROM book b
WHERE b.author_id IN (SELECT a.id FROM author AS a WHERE a.name = :name);
As you will have gathered from the other answers, PostgreSQL doesn’t have this mechanism in straight SQL, though you can now use an anonymous block. However, you can do something similar with a Common Table Expression (CTE):
WITH vars AS (
SELECT 5 AS myvar
)
SELECT *
FROM somewhere,vars
WHERE something = vars.myvar;
You can, of course, have as many variables as you like, and they can also be derived. For example:
WITH vars AS (
SELECT
'1980-01-01'::date AS start,
'1999-12-31'::date AS end,
(SELECT avg(height) FROM customers) AS avg_height
)
SELECT *
FROM customers,vars
WHERE (dob BETWEEN vars.start AND vars.end) AND height<vars.avg_height;
The process is:
Generate a one-row cte using SELECT without a table (in Oracle you will need to include FROM DUAL).
CROSS JOIN the cte with the other table. Although there is a CROSS JOIN syntax, the older comma syntax is slightly more readable.
Note that I have cast the dates to avoid possible issues in the SELECT clause. I used PostgreSQL’s shorter syntax, but you could have used the more formal CAST('1980-01-01' AS date) for cross-dialect compatibility.
Normally, you want to avoid cross joins, but since you’re only cross joining a single row, this has the effect of simply widening the table with the variable data.
In many cases, you don’t need to include the vars. prefix if the names don’t clash with the names in the other table. I include it here to make the point clear.
Also, you can go on to add more CTEs.
This also works in all current versions of MSSQL and MySQL, which do support variables, as well as SQLite which doesn’t, and Oracle which sort of does and sort of doesn’t.
Here is an example using PREPARE statements. You still can't use ?, but you can use $n notation:
PREPARE foo(integer) AS
SELECT *
FROM somewhere
WHERE something = $1;
EXECUTE foo(5);
DEALLOCATE foo;
In DBeaver you can use parameters in queries just like you can from code, so this will work:
SELECT *
FROM somewhere
WHERE something = :myvar
When you run the query DBeaver will ask you for the value for :myvar and run the query.
Here is a code segment using plain variable in postges terminal. I have used it a few times. But need to figure a better way. Here I am working with string variable. Working with integer variable, you don't need the triple quote. Triple quote becomes single quote at query time; otherwise you got syntax error. There might be a way to eliminate the need of triple quote when working with string variables. Please update if you find a way to improve.
\set strainname '''B.1.1.7'''
select *
from covid19strain
where name = :strainname ;
In psql, you can use these 'variables' as macros. Note that they get "evaluated" every time they are used, rather than at the time that they are "set".
Simple example:
\set my_random '(SELECT random())'
select :my_random; -- gives 0.23330629315990592
select :my_random; -- gives 0.67458399344433542
this gives two different answers each time.
However, you can still use these as a valuable shorthand to avoid repeating lots of subselects.
\set the_id '(SELECT id FROM table_1 WHERE name = ''xxx'' LIMIT 1)'
and then use it in your queries later as
:the_id
e.g.
INSERT INTO table2 (table1_id,x,y,z) VALUES (:the_id, 1,2,3)
Note you have to double-quote the strings in the variables, because the whole thing is then string-interpolated (i.e. macro-expanded) into your query.
I need to lowercase array content in PostgreSQL, lower(array['array_content'])) or array[lower('array_content'])) does not work. Actual array is much, much longer.
SELECT * FROM kliendi_aadress WHERE lower(linn) LIKE ANY (array['Tallinn', 'Tartu','Narva'])
Can this even be done?
Well ILIKE solved this problem for me
SELECT * FROM kliendi_aadress WHERE linn ILIKE ANY (array['Tallinn', 'Tartu','Narva']);
the first that come to mind is ugly:
db=# select lower(array['Tallinn', 'Tartu','Narva']::text)::text[];
lower
-----------------------
{tallinn,tartu,narva}
(1 row)
Here I lower text representation of your array and then cast it back to array.
And so comparison:
db=# select 'tartu' = any (lower(array['Tallinn', 'Tartu','Narva']::text)::text[]);
?column?
----------
t
(1 row)
The citext extension can come in handy in this situation.
-- If you haven't enabled citext in your DB
CREATE EXTENSION citext;
select 'tartu' = any (array['Tallinn', 'Tartu','Narva']::citext[])
should work.
I encountered a strange issue this morning. I was creating a view simplifying a list of applications in a Postgres table.
This failed.
CREATE OR REPLACE VIEW application_view AS
SELECT COALESCE( nullif(full_name,''), nullif(additional_info,''), app_name) name
, id
FROM application
ORDER BY COALESCE( nullif(full_name,''), nullif(additional_info,''), app_name)
whereas
CREATE OR REPLACE VIEW application_view AS
SELECT COALESCE( nullif(full_name,''), nullif(additional_info,''), app_name) application
, id
FROM application
ORDER BY COALESCE( nullif(full_name,''), nullif(additional_info,''), app_name)
worked.
I often use name as a column name in tables so any ideas as to why the first sql statement failed?
It's a keyword. When you want to use a keyword as an alias in the select list you have to use the word as:
select 1 name;
ERROR: syntax error at or near "name"
LINE 1: select 1 name;
select 1 as name;
name
------
1
(1 row)
From the documentation about aliases in the select list:
To specify the name to use for an output column, write AS output_name after the column's expression. (You can omit AS, but only if the desired output name does not match any PostgreSQL keyword (see Appendix C). For protection against possible future keyword additions, it is recommended that you always either write AS or double-quote the output name.)
In Postgresql 8 why this is ok
select * from prod where code like '1%'
select * from prod where code like '%1'
but this returns 0 rows (there are codes begining/ending with digit 1)
select * from prod where code like '1%1'
Update
That happens in my current instalation:
# psql --version
psql (PostgreSQL) 8.3.7
create table a(code char(10));
CREATE TABLE
db=# insert into a values('111');
INSERT 0 1
db=# select * from a where code like '1%';
code
------------
111
(1 row)
db=# select * from a where code like '%1';
code
------
(0 rows)
db=# select * from a where code like '1%1';
code
------
(0 rows)
Update 2
It is the datatype ! With varchar it is Ok !
Thank you.
Is it because the datatype is char(10)?
This means that it will always occupy 10 characters even though you just insert something shorter like "111". Therefore, if you don't use a 10-characters string with "1" at the end, "%1" and "1%1" will never match.
(EDIT: I had posted the following (with with an AND operator, rather than OR).
SELECT * FROM prod WHERE code LIKE '%1' OR code LIKE '1%';
If you want AND operator, the query in the question should work OK. However, if you want to use OR operator, then my above query is probably one of the better ways of doing it.