There is a bug report in the open source cheat project described here: https://github.com/cheat/cheat/issues/632
As described in that bug report, a variable named $state never gets set. Looking at the code, it should be set to a value of "none", "full", "personal", "taglist", or "pathlist".
The completion script is here: https://github.com/cheat/cheat/blob/master/scripts/cheat.zsh
I don't know if this script is unfinished or what. But not being a very good shell scripting and knowing nothing about zsh completion, I don't have any ideas on how I might set the $state variable to the appropriate value.
If someone can offer suggestions, I'd appreciate it.
UPDATE
I'm using ohmyzsh, if that makes a difference.
OK, I just made the default value for state to be 'full'. Seems to work.
_cheat() {
local state
state='full'
...snip...
Then it get overridden by the _arguments portion of the code.
Related
I can't get this working and from documentation and examples on the web i cannot work out why.
My code is simple, its just a script to which i want to pass a parameter, not every time. so i've laid the param section as thus
param(
[Parameter(Mandatory=$true)]
[string]$startOfName,
[ValidateRange(0,6)]
[int]$numberOfServers = 1,
[switch]$consecutiveNumbers
)
and im calling the scipt as follows.
.\Get-NextServerName.ps1 -startOfName servername -numberOfServers 5 -consecutiveNumbers
which gives me the lovely error message:
Get-NextServerName.ps1 : A parameter cannot be found that matches parameter name 'consecutiveNumbers'.
Can anyone see anything that I'm doing wrong?
This looks like being a bug in Powergui.Tried it from a command prompt and it worked first time. still won't work in Powergui. Think it might be related to the way it passes command line arguments from the shell pane to the script. Probably going to open a call to discuss, unless I find out im on a way old version.
I have been working on creating appointments from Powershell in Outlook. Everything seems to be working with the exception of being able to set the appointment.RTFBODY. It looks like it is stored as a byte array, but despite my best efforts and many attempts I have been unable to set it. Any suggestions would be much appreciated.
http://pastebin.com/kQvGfNRS
Edit: I was able to find what could be a similar issue. https://social.msdn.microsoft.com/Forums/sqlserver/en-US/5dba0d12-94e8-47a5-b082-93d3693e2a47/cant-set-the-rtfbody-of-an-appointmentitem
"I assume you add a wrong version reference. If you add Microsoft.Office.Interop.Outlook 12.0, I could reproduce your issue. I suggest you remove this reference, and add Microsoft.Office.Interop.Outlook 14.0."
Also found this: Outlook AppointmentItem - How do I programmatically add RTF to its Body?
from the link in your question - "it is just a known problem in OOM - setting the RtfBody property using early binding works. Setting through IDispatch::GetIDsIfNames / Invoke does not."
Powershell always uses late bindings (i.e. you cannot declare a variable as an instance of a particular object. e.g. AppointmentItem).
This is the first time I'm encountering GetLayoutObjectAttribute and I am having serious issues with it. My variable $web won't set. I think it's because PD_WebV isn't the right object name to refer to, but I don't know how to find the right object name. I can't find the objects name when I hit Edit Layout, so does anyone know how to find an layout objects name?
Loop
Pause/Resume Script [Duration (seconds): 1]
Set Variable[$Web; Value: GetLayoutObjectAttribute("PD_WebV";"content")]
If[$Web="done"]
#execute if statements
After Edit:
After some troubleshooting, I found out that PD_WebV is the right object name to refer and it's refered to correctly, so my new question is why doesn't the script go to the line If[$Web="done"] and how could I fix it? Ss my If statement not evaluating something it should be? Is my $web variable never set to done or is the issue something completely different? Would the problem possibly have to do with my WebDirect sharing settings? Any guidance would help. Thanks.
After, After Edit:
So now that my application is getting past Set Variable[$Web; Value: GetLayoutObjectAttribute("PD_WebV";"content")], the variable $web only equals <HTML></HTML>. Does anyone know a way, without using javascript, to test the inside of the html tags?
Also, I printed the bounds of the webViewer PD_WebV that I can't locate on the layout but am referring to in the script. The bounds that are printed are different each time I run the script. Is the usual or unusual? My source is also about:blank so it doesn't look like I'm sourcing from a URL
Is my $web variable never set to done or is the issue something
completely different?
If you're doing:
Set Variable[$Web; Value: GetLayoutObjectAttribute("PD_WebV";"content")]
then the only time
$Web="done"
will return true is when the web page loaded into your web viewer contains exactly the string "done" (in practical terms, that's never).
I have already suggested in a comment that you test for:
PatternCount ( $webpage ; "</html>" )
This is assuming you want the subsequent steps to execute only after the page has finished loading. The entire script would look something like this:
Loop
Pause/Resume Script [Duration (seconds): 1]
Set Variable[$Web; Value: GetLayoutObjectAttribute("PD_WebV";"content")]
Exit Loop If [ PatternCount ( $webpage ; "</html>" ) ]
End Loop
# execute statements
You might also want to add a counter to the loop and exit the script after n trials.
Ah, I reread your question.
To set the object name for your webviewer so that the GetLayoutObjectAttribute function works you need to set it in the Name field in the inspector when you have the webviewer selected.
e.g.:
After that your variable should populate.
Be aware
What it will populate with will be all of the html from the browser, i.e. not a boolean true/false liek your conditional suggests.
I'm not sure exactly what you're trying to accomplish, but to be able to determine a result from your web viewer you'll need to either parse the HTML to see if it's content contains what you're looking for or within the code you're setting the webviewer with, fire a javascript function that calls back to the FileMaker file using a FileMaker url.
I have a problem with Net::Appliance::Session. I created a session, executed my command. After execution it prompts me some question (yes/no). I want to answer it but didn't find a way how to do it. Below you can see my trials:
$session->cmd($command);
$session->waitfor(Match=>'/.*yes*/');
$session->print("no");
$session->waitfor(Match=>'');
$session->print("y");
I don't know where is the problem. Accoding to CPAN documentations Net::Telnet have the method waitfor. But Session documentation tells that we can use waitfor(). Another thing said there is that the method "cmd" have a member Match which includes all the features of waitfor(). So I changed my code like below:
$session->cmd($command, Match=>'/.*yes*/');
$session->print("no");
Executing this reports below error:
Odd number of elements in hash assignment at
/usr/lib/perl5/vendor_perl/5.8.8/Net/Appliance/Session.pm line 245.
Is there any idea how can I do that? And why am I getting this error message?
Thanks in advance..
From the Net::Appliance::Session page at meta::cpan
To handle more complicated interactions, for example commands which prompt for confirmation or optional parameters, you should use a Macro. These are set up in the phrasebook and issued via the $s->macro($name) method call. See the Phrasebook and Cookbook manual pages for further details.
So you set up a macro (scripted call and response) in a phrasebook, and then tell your session to use that macro.
I tried using aegis -change_attributes to change the brief_description of my current change set but it didn't work.
aegis -change_attributes description="test"
What should I do to make this work?
EDIT: The command I was looking for was
aegis -change_attributes brief_description="$DESC";
Since no answer was given (for quite some time) I'm adding the solution I gave in the comments, as the anser:
The above command is correct if you want to set the extensive description. If one wants to just set the brief description "aegis -change_attributes brief_description="$DESC"" has to be used