i'm looking for setup a Rails Environment with Vagrant, for that purpose the box it's been provisioned through bash shell method and includes among others this line:
sudo -u postgres createuser <superuserusername> -s with password '<superuserpassword>'
but i'm getting a configuration error,
createuser: too many command-line arguments (first is "with")
can you help me with the correct syntax for create a Superuser with a password. Thanks
Do it in a single statement within psql:
CREATE ROLE username WITH LOGIN SUPERUSER PASSWORD 'password';
e.g
CREATE ROLE dummy WITH LOGIN SUPERUSER PASSWORD '123456';
Solved with:
sudo -u postgres createuser -s -i -d -r -l -w <<username>>
sudo -u postgres psql -c "ALTER ROLE <<username>> WITH PASSWORD '<<password>>';"
I know is not an elegant solution, but for now it'll do 😊
For PostgreSQL versions 8.1 and newer
To create a superuser:
CREATE USER username SUPERUSER;
If you need to specify the password:
CREATE USER username WITH SUPERUSER PASSWORD 'passwordstring';
To create a PostgreSQL user, follow these steps:
At the command line, type the following command as the server's root user:
su - postgres
You can now run commands as the PostgreSQL superuser.To create a user, type the following command:
createuser --interactive --pwprompt
At the Enter name of role to add: prompt, type the user's name.
At the Enter password for new role: prompt, type a password for the user.
At the Enter it again: prompt, retype the password.
At the Shall the new role be a superuser? prompt, type y if you want to grant superuser access. Otherwise, type n.
At the Shall the new role be allowed to create databases? prompt, type y if you want to allow the user to create new databases. Otherwise, type n.
At the Shall the new role be allowed to create more new roles? prompt, type y if you want to allow the user to create new users. Otherwise, type n.
PostgreSQL creates the user with the settings you specified.
Installing PostgreSQL on GCE requires root password to run sudo -u postgresql. This prompts for a password, which I was never given.
How do I get this pass, or any way to run postgresql commands from the shell in a different way?
Your system user postgresql doesn't have a password (I state with no proof... but I think you'll find this to be true.)
Normally you should use commands like these:
# Test that YOU can use psql (as postgres) to run a query:
psql -U postgres -c 'select * from pg_catalog.pg_user;'
# Test an interactive session:
psql -U postgres my_database
my_database=# select 42 as the_answer;
# Create a new database
psql -U postgres my_database
my_database=# create database mydb;
Alternatively, it's probably possible to login like this (it usually is):
sudo su postgres
And you could probably use this to run createdb. But running psql as yourself is probably better.
If you want to run commands against your postgresql server you should not need to use sudo, just use this syntax to enter the Postgresql Interactive Shell:
psql -U username database_name
OR
psql -U username hostname database_name
Replacing username with your postgresql usename, hostname (if not running on the same server) with the servers host name and database_name with the name of your database. For example:
psql -U postgressql customers
Normally sudo requires your user account password. So assuming that the account you are running the command from is listed in the sudoers file, the password it is prompting you for should be your own. Have you tried that, as opposed to the root or the postgresql password, which you don't appear to have (or might not even be set).
How do I change the password for a PostgreSQL user?
To log in without a password:
sudo -u user_name psql db_name
To reset the password if you have forgotten:
ALTER USER user_name WITH PASSWORD 'new_password';
To change the PostgreSQL user's password, follow these steps:
log in into the psql console:
sudo -u postgres psql
Then in the psql console, change the password and quit:
postgres=# \password postgres
Enter new password: <new-password>
postgres=# \q
Or using a query:
ALTER USER postgres PASSWORD '<new-password>';
Or in one line
sudo -u postgres psql -c "ALTER USER postgres PASSWORD '<new-password>';"
Note:
If that does not work, reconfigure authentication by editing /etc/postgresql/9.1/main/pg_hba.conf (the path will differ) and change:
local all all peer # change this to md5
to
local all all md5 # like this
Then restart the server:
sudo service postgresql restart
You can and should have the users' password encrypted:
ALTER USER username WITH ENCRYPTED PASSWORD 'password';
I believe the best way to change the password is simply to use:
\password
in the Postgres console.
Per ALTER USER documentation:
Caution must be exercised when specifying an unencrypted password with
this command. The password will be transmitted to the server in
cleartext, and it might also be logged in the client's command history
or the server log. psql contains a command \password that can be used
to change a role's password without exposing the cleartext password.
Note: ALTER USER is an alias for ALTER ROLE
To change the password using the Linux command line, use:
sudo -u <user_name> psql -c "ALTER USER <user_name> PASSWORD '<new_password>';"
To the change password:
sudo -u postgres psql
Then
\password postgres
Now enter the new password and confirm.
Then \q to exit.
Go to your PostgreSQL configuration and edit file pg_hba.conf:
sudo vim /etc/postgresql/9.3/main/pg_hba.conf
Then change this line:
Database administrative login by Unix domain socket
local all postgres md5
to:
Database administrative login by Unix domain socket
local all postgres peer
Then restart the PostgreSQL service via the 'sudo' command. Then
psql -U postgres
You will be now entered and will see the PostgreSQL terminal.
Then enter
\password
And enter the new password for the PostgreSQL default user. After successfully changing the password again, go to the pg_hba.conf and revert the change to "md5".
Now you will be logged in as
psql -U postgres
with your new password.
Setting up a password for the postgres role
sudo -u postgres psql
You will get a prompt like the following:
postgres=#
Change password to PostgreSQL for user postgres
ALTER USER postgres WITH ENCRYPTED PASSWORD 'postgres';
You will get something as follows:
ALTER ROLE
To do this we need to edit the pg_hba.conf file.
(Feel free to replace nano with an editor of your choice.)
sudo nano /etc/postgresql/9.5/main/pg_hba.conf
Update in the pg_hba.conf file
Look for an uncommented line (a line that doesn’t start with #) that has the contents shown below. The spacing will be slightly different, but the words should be the same.
local postgres postgres peer
to
local postgres postgres md5
Now we need to restart PostgreSQL, so the changes take effect
sudo service postgresql restart
To request a new password for the postgres user (without showing it in the command):
sudo -u postgres psql -c "\password"
This was the first result on google, when I was looking how to rename a user, so:
ALTER USER <username> WITH PASSWORD '<new_password>'; -- change password
ALTER USER <old_username> RENAME TO <new_username>; -- rename user
A couple of other commands helpful for user management:
CREATE USER <username> PASSWORD '<password>' IN GROUP <group>;
DROP USER <username>;
Move user to another group
ALTER GROUP <old_group> DROP USER <username>;
ALTER GROUP <new_group> ADD USER <username>;
If you are on Windows.
Open pg_hba.conf file and change from md5 to peer.
Open cmd and type psql postgres postgres.
Then type \password to be prompted for a new password.
Refer to this Medium post for further information & granular steps.
The configuration that I've got on my server was customized a lot, and I managed to change the password only after I set trust authentication in the pg_hba.conf file:
local all all trust
Don't forget to change this back to password or md5.
For my case on Ubuntu 14.04 (Trusty Tahr), installed with PostgreSQL 10.3: I need to follow the following steps
su - postgres to switch the user to postgres
psql to enter the PostgreSQL shell
\password and then enter your password
Q to quit the shell session
Then you switch back to root by executing exit and configure your pg_hba.conf (mine is at /etc/postgresql/10/main/pg_hba.conf) by making sure you have the following line
local all postgres md5
Restart your PostgreSQL service by service postgresql restart
Now switch to the postgres user and enter the PostgreSQL shell again. It will prompt you for a password.
Use this:
\password
Enter the new password you want for that user and then confirm it.
If you don't remember the password and you want to change it, you can log in as "postgres" and then use this:
ALTER USER 'the username' WITH PASSWORD 'the new password';
TLDR:
On many systems, a user's account often contains a period, or some sort of punctuation (user: john.smith, horise.johnson). In these cases, a modification will have to be made to the accepted answer above. The change requires the username to be double-quoted.
Example
ALTER USER "username.lastname" WITH PASSWORD 'password';
Rationale:
PostgreSQL is quite picky on when to use a 'double quote' and when to use a 'single quote'. Typically, when providing a string, you would use a single quote.
This is similar to other answers in syntax, but it should be known that you can also pass the MD5 hash value of the password, so you are not transmitting a plain text password.
Here are a few scenarios of unintended consequences of altering a users password in plain text.
If you do not have SSL and are modifying remotely you are transmitting the plain text password across the network.
If you have your logging configuration set to log DDL statements log_statement = ddl or higher, then your plain text password will show up in your error logs.
If you are not protecting these logs, it’s a problem.
If you collect these logs/ETL them and display them where others have access, they could end up seeing this password, etc.
If you allow a user to manage their password, they are unknowingly revealing a password to an administrator or low-level employee tasked with reviewing logs.
With that said, here is how we can alter a user's password by building an MD5 hash value of the password.
PostgreSQL, when hashing a password as MD5, salts the password with the user name and then prepends the text "md5" to the resulting hash.
Example: "md5"+md5(password + username)
In Bash:
echo -n "passwordStringUserName" | md5sum | awk '{print "md5"$1}'
Output:
md5d6a35858d61d85e4a82ab1fb044aba9d
In PowerShell:
[PSCredential] $Credential = Get-Credential
$StringBuilder = New-Object System.Text.StringBuilder
$null = $StringBuilder.Append('md5');
[System.Security.Cryptography.HashAlgorithm]::Create('md5').ComputeHash([System.Text.Encoding]::ASCII.GetBytes(((ConvertFrom-SecureStringToPlainText -SecureString $Credential.Password) + $Credential.UserName))) | ForEach-Object {
$null = $StringBuilder.Append($_.ToString("x2"))
}
$StringBuilder.ToString();
## OUTPUT
md5d6a35858d61d85e4a82ab1fb044aba9d
So finally our ALTER USER command will look like
ALTER USER UserName WITH PASSWORD 'md5d6a35858d61d85e4a82ab1fb044aba9d';
Relevant links (note I will only link to the latest versions of the documentation. For older, it changes some, but MD5 is still supported a ways back.)
create role
The password is always stored encrypted in the system catalogs. The ENCRYPTED keyword has no effect, but is accepted for backwards compatibility. The method of encryption is determined by the configuration parameter password_encryption. If the presented password string is already in MD5-encrypted or SCRAM-encrypted format, then it is stored as-is regardless of password_encryption (since the system cannot decrypt the specified encrypted password string, to encrypt it in a different format). This allows reloading of encrypted passwords during dump/restore.
Configuration setting for password_encryption
PostgreSQL password authentication documentation
Building PostgreSQL password MD5 hash value
And the fully automated way with Bash and expect (in this example we provision a new PostgreSQL administrator with the newly provisioned PostgreSQL password both on OS and PostgreSQL run-time level):
# The $postgres_usr_pw and the other Bash variables MUST be defined
# for reference the manual way of doing things automated with expect bellow
#echo "copy-paste: $postgres_usr_pw"
#sudo -u postgres psql -c "\password"
# The OS password could / should be different
sudo -u root echo "postgres:$postgres_usr_pw" | sudo chpasswd
expect <<- EOF_EXPECT
set timeout -1
spawn sudo -u postgres psql -c "\\\password"
expect "Enter new password: "
send -- "$postgres_usr_pw\r"
expect "Enter it again: "
send -- "$postgres_usr_pw\r"
expect eof
EOF_EXPECT
cd /tmp/
# At this point the 'postgres' executable uses the new password
sudo -u postgres PGPASSWORD=$postgres_usr_pw psql \
--port $postgres_db_port --host $postgres_db_host -c "
DO \$\$DECLARE r record;
BEGIN
IF NOT EXISTS (
SELECT
FROM pg_catalog.pg_roles
WHERE rolname = '"$postgres_db_useradmin"') THEN
CREATE ROLE "$postgres_db_useradmin" WITH SUPERUSER CREATEROLE
CREATEDB REPLICATION BYPASSRLS
PASSWORD '"$postgres_db_useradmin_pw"' LOGIN ;
END IF;
END\$\$;
ALTER ROLE "$postgres_db_useradmin" WITH SUPERUSER CREATEROLE
CREATEDB REPLICATION BYPASSRLS
PASSWORD '"$postgres_db_useradmin_pw"' LOGIN ;
"
Change password to "postgres" for user "postgres":
# ALTER USER postgres WITH ENCRYPTED PASSWORD '<NEW-PASSWORD>';
I was on Windows (Windows Server 2019; PostgreSQL 10), so local type connections (pg_hba.conf: local all all peer) are not supported.
The following should work on Windows and Unix systems alike:
backup pg_hba.conf to pg_hba.orig.conf e.g.
create pg_hba.conf with only this: host all all 127.0.0.1/32 trust
restart pg (service)
execute psql -U postgres -h 127.0.0.1
enter (in pgctl console) alter user postgres with password 'SomePass';
restore pg_hba.conf from 1. above
Check file pg_hba.conf.
In case the authentication method is 'peer', the client's operating system user name/password must match the database user name and password. In that case, set the password for Linux user 'postgres' and the DB user 'postgres' to be the same.
See the documentation for details: 19.1. The pg_hba.conf File
In general, just use the pgAdmin UI for doing database-related activity.
If instead you are focusing more in automating database setup for your local development, CI, etc.
For example, you can use a simple combination like this.
(a) Create a dummy super user via Jenkins with a command similar to this:
docker exec -t postgres11-instance1 createuser --username=postgres --superuser experiment001
This will create a super user called experiment001 in you PostgreSQL database.
(b) Give this user some password by running a NON-Interactive SQL command.
docker exec -t postgres11-instance1 psql -U experiment001 -d postgres -c "ALTER USER experiment001 WITH PASSWORD 'experiment001' "
PostgreSQL is probably the best database out there for command line (non-interactive) tooling. Creating users, running SQL, making backup of database, etc.
In general, it is all quite basic with PostgreSQL, and it is overall quite trivial to integrate this into your development setup scripts or into automated CI configuration.
Using pgAdmin 4:
Menu Object → Change password...
Most of the answers were mostly correct, but you need to look out for minor things. The problem I had was that I didn't ever set the password of "postgres", so I couldn't log into an SQL command line that allowed me to change passwords. These are the steps that I used successfully (note that most or all commands need sudo or root user):
Edit the pg_hba.conf file in the data directory of the DB cluster you're trying to connect to.
The folder of the data directory can be found by inspecting the systemd command line, easily obtained with systemctl status postgresql#VERSION-DB_CLUSTER. Replace VERSION with your psql version and DB_CLUSTER with the name of your database cluster. This may be main if it was automatically created, so, e.g., postgresql#13-main. Alternatively, my Bash shell provided auto-complete after entering postgresql#, so you could try that or look for the PostgreSQL services in the list of all services (systemctl -a). Once you have the status output, look for the second command line after CGroup, which should be rather long, and start with /usr/lib/postgresql/13/bin/postgres or similar (depending on version, distro, and installation method). You are looking for the directory after -D, for example /var/lib/postgresql/13/main.
Add the following line: host all all 127.0.0.1/32 trust. This allows for all users on all databases to connect to the database via IPv4 on the local machine unconditionally, without asking for a password.
This is a temporary fix and don't forget to remove this line again later on. Just to be sure, I commented out the host all all 127.0.0.1/32 md5 (md5 may be replaced by scram-sha-256), which is valid for the same login data, just requiring a password.
Restart the database service: systemctl restart postgresql#... Again, use the exact service you found earlier.
Check that the service started properly with systemctl status postgresql#....
Connect with psql, and very importantly, force psql to not ask for a password. In my experience, it will ask you for a password even though the server doesn't care, and will still reject your login if your password was wrong. This can be accomplished with the -w flag.
The full command line looks something like this: sudo -u postgres psql -w -h 127.0.0.1 -p 5432. Here, postgres is your user and you may have changed that. 5432 is the port of the cluster-specific server and may be higher if you are running more than one cluster (I have 5434 for example).
Change the password with the \password special command.
Remember to remove the password ignore workaround and restart the server to apply the configuration.