Using this code, or a variant of, is there anything that can be added to "trick" opt into conversing as another user in a style more similar to a chatbot. As of now it will either start something more similar to an article or have a conversation with itself for a few lines as seen below.
val = input("Enter your value: ")
input_ids = tokenizer((val), return_tensors='pt').input_ids
output = model.generate(input_ids, min_length=1, max_length=1024, penalty_alpha=0.6, top_k=6)
print("Output:\n" + 100 * '-')
print(tokenizer.decode(output[0], skip_special_tokens=True))
print("" + 100 * '-')
with open("OutputText.txt", "w") as f:
f.write(tokenizer.decode(output[0], skip_special_tokens=True))
Here's an example of the current output:
*User Input:
Hello There.
Model Output:
Hello there. I have an egg that matches your TSV. Would you mind hatching it for me?
Sure, I'll add you now. Let me know when you're online.
Sorry for the late reply. I'm online now for the next few hours. Just send me a trade request whenever you're ready.
No probs, I'm in the middle of a battle at the moment, but I'll get you as soon as I'm done.
Thank you very much for the hatch. Have a nice day :D
*
I've attempted to add a prompt to the start and it hasn't made a difference.
Related
So I have created a huge screen that essentially just shows the robot status for every robot in this factory (individually)… At the very end of the project, they decided they want one object on the screen that blinks if any of the 300 robots fault. I am trying to think of a way to make this work. Maybe a global script of some kind? Problem is, I do not do much scripting in Cimplicity, so any help is appreciated.
All the points that are currently used on this screen (to indicate a fault) have very similar names… as in, the beginning is the same… so I was thinking of a script that could maybe recognize if a bit is high based on PART of it's string name characteristic. The end will change a little each time, but I am sure there is a way to only look for part of a string and negate the rest. If the end has to be hard coded, that's fine.
You can use a Python script in Cimplicity.
I will not go into detail on the use of python in Cimplicity, which is well described in the documentation indicated above.
Here's an example of what can be done... note that I don't have a way to test it and, of course, this will work if the name of your robots in the declaration follows the format Robot_1, Robot_2, Robot_3 ... Robot_10 ... Robot_300 and it also depends on the Name and the Type of the fault variable... as you didn't define it, I imagine it can be an integer, with ZERO indicating no error. But if you use something other than that, you can easily change it.
import cimplicity
(...)
OneRobotWithFault = False
# Here you get the values and check for fault
for i in range(0, 300):
pointName = f'MyFactory.Robot_{i}.FaultCode'
robotFaultCode = cimplicity.point_get(pointName)
if robotFaultCode > 0:
OneRobotWithFault = True
break
# Set the status to the variable "WeHaveRobotWithFault"
cimplicity.point_set("WeHaveRobotWithFault", OneRobotWithFault)
Screenshot 2The one screen shot of this errorissue I am building an app using api.ai , an syllabus app which tells you the syllabus, but when I invoke it with desired parameters like branch and semester I have made each individual intent for it even then I'm getting miss answers sometimes like when asked for sem 4 and branch electronics its showing sem 3 sem 4 or of other branch . I have given sem and branch as required n given few invoking statements even then getting this. Tried even training it manually for free 30s of actions on api.ai no solution please help. Not using any web hook , context , event.
Short answer - check here for screenshots http://imgur.com/a/tVBlD
Long answer - You have two options
1) Create 3 separate custom entities for each branch type (computer science, civil, communication) which you need to attach to your branch parameter
2) Using the sys.any entity and attaching it to your branch parameter; then determining what the incoming parameter value is on a server then sending back a response through a webhook.
If you go the second route, you have to create a webhook and hardcode recognized words like 'computer science' in IF statements which check the incoming parameter (sent through JSON from API.AI). This route will be more difficult but I think you will have to travel it regardless because you will have backend architecture which you access to find and return the syllabus.
Note the second route is what I did to solve a similar issue.
You can also use regex to match an item in a list which limits the amount of hardcoding and if statements you have to do.
Python regex search example
baseurl = "http://mywebsite.com:9001/"
# Parse the document
# Build the URL + File Path and Parse the Document
url = baseurl + 'Data'
xmlLink = urllib.request.urlopen(url)
xmlData = etree.parse(xmlLink)
xmlLink.close()
# Find the number of elements to cycle through
numberOfElements = xmlData.xpath("count(//myData/data)")
numberOfElements = int(numberOfElements)
types = xmlData.xpath("//myData/data")
# Search the string
i = 0
while numberOfElements > i:
listSearch= types[i].text
match = re.search(parameter, listSearch, re.IGNORECASE)
if match is None:
i += 1
else:
# Grab the ID
elementID = types[i].get('id')
i = 0
break
An simple trick would be what i did, just have an entity saved for both branch and semester , use sys.original parameters and an common phrase for provoking each intent saves up the hard work.
So I'm taking Udacity's Swift for Developers course. I attempted to look at the forums for this question but oddly, they were quiet. This is the programming prompt:
var forwardString = "stressed"
var backwardsString = forwardString.characters.reversed()
print(backwardsString)
var lottaLikes = "If likeyou wanna learn Swift likeyou should build lots of small apps cuz it's likea good way to practice."
var noLikes = lottaLikes.replacingOccurrences(of:"like", with:"")
print(noLikes)
For whatever reason, I keep getting this error message:
Be sure that you have replaced all occurences of the word "like" and removed any extra spaces.
What am I missing here? If you need clarification on this I would be happy to provide it.
Thank you
It may be that your code gets the job done, but only because your variable lottaLikes is written in a weird way. You usually would have two spaces surrounding the word "like" so just removing the word would leave 2 spaces in a row. I would suggest writing the following line:
var noLikes = lottaLikes.replacingOccurrences(of:"like ", with:"")
It may be that Udacity is not checking the actual output, but the code itself. If so, It may be looking for something like I wrote above.
If this still does not work, you may want to write another line like so:
var noExtraSpaces = noLikes.replacingOccurences(of: " ", with: " ")
I'm new to do this language and i'm trying to code my own bot. I alredy got the basics and manage to use variables and aliases, however i was looking forward to do a mini-game in my chat in which you could have your own pet, name it and level it up.
I could do all this, however my problem resides in that at the end of the day, i would close the program and all the pets would go away, and that kind of destroys the purpose of it.
I was wondering if there was any way in i could save these variables and reload them each time i open the program, maybe save them on a .txt?
Any suggestion are greatly appreciated.
I agree with one of the comments that it's best to go with .ini files for this problem.
An example of the syntax, taken from the url linked above:
writeini reminder.ini birthday jenna 2/28/1983
writeini reminder.ini birthday Mike 10/10/1990
This produces the following file:
[birthday]
jenna = 2/28/1983
Mike = 10/10/1990
And is to be read like this:
echo -a Mike: $readini(reminder.ini, n, birthday, mike)
echo -a Jenna: $readini(reminder.ini, n, birthday, jenna)
If you want more flexibility to define your own data format, you can also revert to plain text files. The basic /write and $read functions have some pretty neat functionality: see the docs
Something like this should work for writing:
; search if the pet is already saved
$read(pets.txt,ns,%petname)
if ($readn == 0) {
; append to end of file
write pets.txt %petname %age %mood
}
else {
; replace line
write -l $readn pets.txt %petname %age %mood
}
To retrieve specific pets:
var %pet_info = $read(pets.txt, ns, %petname)
; Split the found line on space (ASCII-code 32)
tokenize 32 %pet_info
var %age = $2
var %mood = $3
This returns the line that starts with the petname you're looking for.
I'm currently working on benchmarking a RESTful service I've made, and part of that is making sure it runs in a reasonable amount of times for a large array of parameters. For example, let's say I have RESTful API of the form some_site.com/item?item_id=y. In that case to be sure my service is working as fast as I'd like it to work, I'd want to try out many values for y one by one, preferably coming from some text file. I can't figure out any way of doing this in ab or httperf. I'm open to using a different benchmarking program if I have, but would prefer something simple and light. What I want to do seems like something pretty standard, so I'm guessing there must already be a program that let's me do it, but an hour or so of googling hasn't gotten me an answer. Ideas?
Answer: Jmeter (which is apparently awesome). This faq explains how to do it. Hopefully this helps someone else, as it took me like a day of searching to figure this out.
I have just had some good experience with using JavaScript (via BSF/Rhino) in JMeter.
I have put one thread group in my test plan and stick a 'Simple Controller' with two elements under it - 'HTTP Request' sampler and 'BSF PreProcessor'.
Set BSF language to 'javascript' and either type the code into the text box or point it to a file (use full path or relative to CWD of JMeter process).
/* Since `Math.random()` gives us float, we use `java.util.Random()`
* see: http://docs.oracle.com/javase/7/docs/api/java/util/Random.html */
var Random = new Packages.java.util.Random();
var min = 10-1;
var max = 2;
var maxLines = (min)+Random.nextInt(max-min);
var s = '';
for (var d = 0; d <= maxLines; d++) {
s += d.toString()+','+Random.nextInt(1000).toString()+'\n';
}
// s => '0,312\n1,104\n2,608\n'
vars.put('PAYLOAD', s);
Now I can refer to ${PAYLOAD} in the HTTP request!
You can generate JSON, but you will need to upgrade jakarta-jmeter-2.5.1/lib/js-1.6R5.jar with the newest version of Rhino to get JSON.stringify and JSON.parse. That worked perfectly for me also, though I thought I'd put a simple example here.
You can use BSF pre-processor for URL params as well, just set another variable with vars.put('X', 'some value') and pass it as ${X} in the request parameter.
This blog post helped quite a bit, by the way.