I was following the Gromacs MD Simulation tutorial, but an error occured in the 1st command during "Analyzing Protein-Ligand Interactions and Ligand Dynamics".
I can't edit the mentioned files, as these are binary files.
Please suggest something to resolve this issue.
I tried to resolve the error to get the distance information.
This is the command I used :
gmx distance -s md_0_10.tpr -f md_0_10_center.xtc -select 'resname "JZ4" and name OAB plus resid 102 and name OE1' -oall
Error cccurred:
[Program: gmx distance, version 2021.4-Ubuntu-2021.4-2
Source file: src/gromacs/trajectoryanalysis/modules/distance.cpp (line 218)
Function: void gmx::analysismodules::{anonymous}::checkSelections(const SelectionList&)
Inconsistency in user input:
Selection 'resname "JZ4" and name OAB plus resid 102 and name OE1' does not
evaluate into an even number of positions (there are 1 positions)
]
Screenshot of the problem
Related
i am using waijung blockset to programm a stmµc. And i wanted to use CAN-Bus blocks but i am facing the following error:
The build process will terminate as a result.
Caused by:
Error, a block diagram was specified in S-function 'stm32f4_can/CAN Setup'. Please make sure your S-function name is not a Simulink model or the name of the current model. You can use the Matlab command 'which -all sfunction_name' to locate all occurrences of model files with the name sfunction_name
hereby i did not insatll MinGW-w64 C/C++ compiler yet. I also tried in comand window >> which -all sfunction_name
'sfunction_name' not found.
I am relatively new to the world of coding, so I am having trouble resolving an issue when running TranslocWrapper.pl tutorial_metadata.txt preprocess/ results/ --threads 2. I am trying to run the HTGTS Pipeline according to this GitHub project. This is the full error:
. Library Genome Chr Start End Strand
1 RAG1A_SRep2 hg19 chr11 36594878 36595030 -
Metadata error: chr must be valid at /home/micah/transloc_pipeline/bin/TranslocWrapper.pl line 285.
main::check_validity_of_metadata('HASH(0x2903ac8)') called at /home/micah/transloc_pipeline/bin/TranslocWrapper.pl line 248
main::read_in_meta_file() called at /home/micah/transloc_pipeline/bin/TranslocWrapper.pl line 90
I have already double-checked the successful installation of the Software Dependencies, so everything should be all good, but I am having trouble interpreting the "Metadata error: chr must be valid at ..." line. If it helps, these are the specific lines that are being called in the error:
TranslocWrapper.pl line 285:
croak "Metadata error: chr must be valid" unless grep { $_ eq $expt->{chr} } #chrlist;
TranslocWrapper.pl line 248:
check_validity_of_metadata($expt);
TranslocWrapper.pl line 90:
read_in_meta_file;
Thanks in advance for the help!
So the error is saying that one of the sequence characters in the metadata file is not present in the sequence's assembly file.
Given that this is the provided example you should assume that the data is correct and your invocation is faulty.
Have you done the TranslocPreprocess.pl preprocessing steps?
If you have try looking at the first line of the metadata file, identify the assembly entry. Ensure that the assembly file exists and that it contains the required sequence.
One common problem with this kind of code is the case of the filenames. The examples are designed to be run in Linux where filename case matters. Windows likes to pretend that case doesn't matter, this can cause problems. If you are running this code from Microsoft Windows or extracted any of the archives from within Windows this is a likely cause of the error.
Hi would like to have multiple kickstart files which use a central kickstart file for the bulk of the install and a second file for the small differences. I'm building DVDs for distribution.
The first ks contains small config and has a %include line which points to a common ks file which should do most of the work.
I'm having trouble with %include line.
Fist of all have I understood what %include is for?
Second I think I have the syntax wrong because when I boot I get the following error message:
unable to open input kickstart file: Could not open/read file:///mnt/sysimage/media/dvd/ks/common.cfg
I am installing from a DVD what is the correct path or syntax to the files stored in a sub directory called /ks/ of the DVD's root?
I have tried the following:
%include /mnt/sysimage/media/dvd/ks/common.cfg
%include cdrom:/ks/common.cfg
Does anyone have any working examples?
Thanks in advance for your support
I eventually found part of the answer
%include /mnt/stage2/ks/common.cfg
The dvd is mounted as stage2
However I now get an error message saying it cant read the file
%%include
I can see the file and less it if I hit ctrl + alt + F1
Does anyone have a working simple example of how this should be written?
Open your isolinux/isolinux.cfg from the OS and give the ks file path as below . You can enter your kick start option in boot: prompt of dvd
label 1
kernel vmlinuz
append initrd=initrd.img nofb skipddc lang= devfs=nomount ramdisk_size=8192 ks=cdrom:/option1.cfg 1
label 2
kernel vmlinuz
append initrd=initrd.img nofb skipddc lang= devfs=nomount ramdisk_size=8192 ks=cdrom:/option2 2
label 3
kernel vmlinuz
append initrd=initrd.img nofb skipddc lang= devfs=nomount ramdisk_size=8192 ks=cdrom:/option3.cfg 3
Then edit /isolinux/boot.msg and add the enter the below details
Select installation:
1) option 1
2) option 2
3) option 3
I am trying to run some kind of programm using command line, but I got an error.
The command line is:
quantisnp2.exe --outdir D:\output\ --config "C:\Program files\QuantiSNP\params.dat" --levels "C:\Program files\QuantiSNP\levels.dat" --sampleid CNV1 --gender female --emiters 10 --Lsettings 2000000 --doXcorrect --genotypes --gcdir D:\gc\ --input-files C:\Program files\CNV1.txt
QuantiSNP:Single-file mode input find.
QuantiSNP:Processing file: C:|Program
QuantiSNP:Local CG content directory specified. Local CG content correction will be used.
??? Error using ==>textread at 167
File not found.
Error in ==> quantisnp2 at 293
The first thing I'd be looking at is the unquoted C:\Program files\CNV1.txt at the end of the command (all your other ones are quoted).
There's a good chance that's being treated as two arguments, C:\Program and files\CNV1.txt.
You may also want to check the spelling of emiters, I'm pretty certain the correct English word would be emitters though, of course, this could be a case of the QuantiSNP developers not knowing how to spell :-)
I've successfully created a box file with tesseract
now after running the unicharset_extractor
having it creating the unicharset file that looks like:
...
n 3 NULL -1
s 3 NULL 23
t 3 NULL 43
...
I've continued with this command
mftraining -U unicharset -O testlang.unicharset testlang.tr
only to get the next error
Reading testlang.tr ...
testlang has no defined properties.
Error: Illegal short name for a feature!
I've never worked with Tesseract, but it seems there is an open issue in the bug database that looks a lot like your problem : http://code.google.com/p/tesseract-ocr/issues/detail?id=385
It seems that it is related to scientific notation not being correctly supported by some functions.
On the issue page a user suggests a solution, and another one proposes a patch. You could try applying the patch to see if it helps.